new DJI F450 quad. Arf - RC Groups
Thread Tools
This thread is privately moderated by cryhavoc38, who may elect to delete unwanted replies.
Jun 10, 2012, 06:39 PM
Trader Rating: 210
Go Hawks!
cryhavoc38's Avatar

new DJI F450 quad. Arf

First up, this is not a fully DJI ARF. It has other brand motors and esc's but the frame is a DJI Flamewheel 450.

The 450 frame is brand new and never flown. I just started assembling this last weekend.

Three of the motors previously were used in a test frame for about 6 hover flights when I was testing out a naza. I purchased a new motor to replace one of the four that had a bent shaft from the factory.

So three of the motors have 6 hover flights, one motor is brand new

The esc's are all Hobbywing Flyfun 18amp.

I've also installed a hobbywing 3/5amp 6v sbec to power whatever flight controller board you decide to purchase, or it can be used to power LED lights if you elect to use a NAZA which has its own bec.

The motors are from Headsuprc and are the HURC 400

18amp hobbywing flyfun 18amp

I have already soldered the esc's, main flight battery connector and sbec to the lower board so you are all set there.
All the motors and esc's already have their 3.5mm bullets installed.

The motors are installed, and the esc's just need to be plugged into the motors when you install the flight board so you can determine which direction you need the props to rotate. I will add zip ties to hold the esc's in place before shipping. I use double sided sticky tape and zip ties to keep things secure.

Also included are 4 12" LED strips (two white and two red) that will be controlled by a XEN Led controller with infrared remote. I have not installed this led kit yet, but I can do this for you unless you wish to do it yourself.

Also included are two Turnigy Nanotech 3s 2200mAH 45c packs.
These packs were used for the previous 6 hover tests with the other frame and the naza. Barely used and in great condition.

NOTE: As mentioned will need to install your own Flight Controller and receiver. All the hard work has been done for you. Installing the FC board and receiver is easy stuff.

total retail for everything is $215 not including shipping.

My price is $155 shipped USPS to anywhere in the CONUS, AK, HI and PR
No overseas shipping.

Paypal with no fee to the buyer.

PM me with any questions you may have.

Last edited by cryhavoc38; Jun 10, 2012 at 09:03 PM.
Sign up now
to remove ads between posts
Jun 11, 2012, 10:39 AM
Trader Rating: 306
Multi RC Aircraft User!!
Mattsrcking's Avatar

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold DJI F450 ARF and NAZA brand new in sealed bags. Build, add RX and battery and fly jasper7821 Aircraft - Electric - Multirotor (FS/W) 25 May 13, 2012 02:02 PM
Sold DJI F450 Flamewheel ARF R Hudson Aircraft - Electric - Multirotor (FS/W) 8 Feb 21, 2012 10:57 PM
Sold NIB DJI F450 ARF Kit blade strike Aircraft - Electric - Multirotor (FS/W) 4 Feb 12, 2012 08:39 PM
Sold New DJI F450 Frame (450mm) - $75 Shipped mmalik4 Aircraft - Electric - Multirotor (FS/W) 3 Dec 26, 2011 05:19 PM
Sold DJI F450 flamewheel quad frame kauaicuda Aircraft - Electric - Multirotor (FS/W) 2 Dec 14, 2011 07:33 PM