Thread Tools
Jan 04, 2013, 05:20 AM
Registered User
Quote:
Originally Posted by JimDrew
You can also specify the failsafe type of each channel.
Will failsafe be triggered by lack of input, when PPM is used?

Fred
Sign up now
to remove ads between posts
Jan 04, 2013, 10:37 AM
Xtreme Power Systems
Quote:
Originally Posted by TTRotary
OK. Maybe I'm not understanding, but I was hoping for an Rx that automatically gives you Rx pack voltage on the radio's display as the Optima / A9 does, without using up another channel. Perhaps this feature can be adressed with the Divbee Nano / RF V2?

In any case, I like this modular idea and I am happy to hear the FCC would not be involved. These AMA expo samples...would they be take-home-to-test samples?
No, they may not even be functional samples if they don't get back to me in time.
Jan 04, 2013, 10:37 AM
Xtreme Power Systems
Quote:
Originally Posted by flarssen
Will failsafe be triggered by lack of input, when PPM is used?

Fred
Yes.
Jan 09, 2013, 10:41 PM
Registered User
When will the 10 channel expander and the connecting wire to the Nano receiver be available?
Jan 10, 2013, 04:41 PM
Xtreme Power Systems
No release date, but I am showing prototypes at the AMA expo this weekend.
Jan 21, 2013, 02:41 PM
Rangers Lead the Way
Any updates for us Jim?
Jan 21, 2013, 05:13 PM
Xtreme Power Systems
Just received the production DivBee modules for R/C today.
Last edited by JimDrew; Jan 21, 2013 at 05:20 PM.
Jan 21, 2013, 08:11 PM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by JimDrew
Just received the production DivBee modules for R/C today.

sweet!
Jan 22, 2013, 01:38 PM
Rangers Lead the Way
Quote:
Originally Posted by JimDrew
Just received the production DivBee modules for R/C today.
A little concerned about that snap-on coax connection. It's fine inside the radio / TX module where it doesn't move around, but could be troublesome inside a fuse? I assume these are the RF modules we're looking at?

Are the 10ch boards in yet?
Jan 22, 2013, 02:30 PM
Registered User
E_ferret's Avatar
Quote:
Originally Posted by JimDrew
Just received the production DivBee modules for R/C today.
looks nice, i suppose you will supply antennas of various lengths?
a question; what happens if the two connectors are rotated so that they touch.
(accidently, of course)
Jan 23, 2013, 10:09 AM
Xtreme Power Systems
Quote:
Originally Posted by TTRotary
A little concerned about that snap-on coax connection. It's fine inside the radio / TX module where it doesn't move around, but could be troublesome inside a fuse? I assume these are the RF modules we're looking at?

Are the 10ch boards in yet?
The RF unit will be inside of the case with the snap-on u.FL connectors glued. All you will see is two coax wires.

10 channel boards and RF unit boards won't be available until March.
Jan 23, 2013, 10:11 AM
Xtreme Power Systems
Quote:
Originally Posted by E_ferret
looks nice, i suppose you will supply antennas of various lengths?
a question; what happens if the two connectors are rotated so that they touch.
(accidently, of course)
No, there is only one length, which is a tuned coax (yes, it does matter). That length is 230mm with a 28mm strip. The connectors won't rotate, but if they did, they are both ground so nothing would happen.
Jan 23, 2013, 03:32 PM
Registered User
Quote:
Originally Posted by JimDrew
The RF unit will be inside of the case with the snap-on u.FL connectors glued. All you will see is two coax wires.

10 channel boards and RF unit boards won't be available until March.
Does this mean we can purchase these at "Toledo"?....
Jan 23, 2013, 04:09 PM
Rangers Lead the Way
Quote:
Originally Posted by JimDrew
The RF unit will be inside of the case with the snap-on u.FL connectors glued. All you will see is two coax wires.

10 channel boards and RF unit boards won't be available until March.
Thanks for both responses Jim. I'm going to allow myself a little "woohoo!" on that date.

Given this expander and RF unit, are you still contemplating that integrated 9-channel with telem or is that over with now.

Out fo curiousity - why are the antennae longer for these than the nanos. I suspect this is a simple question with a complex answer...
Jan 24, 2013, 09:51 AM
Xtreme Power Systems
Quote:
Originally Posted by tande
Does this mean we can purchase these at "Toledo"?....
Yes. I will be bringing them to Toledo.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold JR Channel Expander Clavin01 Aircraft - General - Radio Equipment (FS/W) 1 Apr 13, 2012 06:48 AM
Looking to expand my operation... CyberJay Coaxial Helicopters 14 May 17, 2005 05:50 PM
PFM is looking to expand into the larger scale aircraft. WJ Birmingham Sport Planes 12 Jan 02, 2004 09:31 PM
Expand battery bay in flying wing? navyflier Foamies (Kits) 7 Apr 08, 2003 10:27 AM