Thread Tools |
This thread is privately moderated by boredom.is.me, who may elect to delete unwanted replies. |
Trader Rating: 36
|
|
|
For Sale
MultiWii Nano Control Board (2.1 grams), BL Motors x4, ESCs x4, Receiver, and More
This is a re-listing of the equipment I gathered for a 3" quad project.
I initially wanted $275 shipped or best offer. Now I am asking for $250 shipped or best offer. MultiWii Nano Copter Control Board: - This is a limited product. To my knowledge, only 10 were distributed. The board retails for $110. - This board features Gyros (obviously ), Accelerometers, a Barometer, and a Magnetometer. - It weighs only 2.09 grams without the outer cover boards which makes this ideal for a quick micro-nano build. If a serious amount of protection is required, there are two external mounting plates. This bumps the weight up to 6.1 grams. - To add to its lightweight, the MultiWii Nano is less than half the size of a normal board (50x50mm) and is even much smaller than the Open Pilot board (36x36mm). This is only 21x21mm. Motors: - The four motors included are Oversky AP02 brushless outrunners. They weight only 2.3 grams. - I have professionally and pridefully soldered connectors which are compatible with most 3 amp speed controllers. Electronic Speed Controllers: - The four speed controllers included are XP3A brushless controllers. They weigh only 0.7 grams with the connectors, and have a 3 amp rating. Receiver: - Optional - - The receiver included is a Deltang Rx33. This is a 6ch DSM2 compatible receiver. It weighs only 0.6 grams. It features four (4) nano JST servo/esc connectors. The extra wo chcannels may be accessed via solder pads. (These are very easy to get to if needed.) The Rx33 also has a built-in 2 amp brushed ESC. The antenna has been resoldered, but this hasn't given any issues. - If the Rx33 is not wanted, take $35 off the total price. More: - custom wire harness made for the MultiWii Nano and Rx33 - nice and clean - extra wiring and connections included with MultiWii Nano - retractable USB to Micro USB cable - three pairs of counter rotating 2510 (2.5"x1") props - twelve (12) mounting screws for the motors - M1.4x4 - sixteen (16) screws for custom designed airframe - M1.4x6 - However, I never produced the airframe. - high grade 26awg silicone wire - red and blue I would prefer not to split, but I will consider. Trades are also welcomed. Thanks, Kevon Here is my 3" thread. https://www.rcgroups.com/forums/show...highlight=qb75 THE VIDEO BELOW IS NOT MY VIDEO. http://www.youtube.com/watch?feature...&v=xTbHriE5wvU |
|
Last edited by boredom.is.me; Jun 02, 2012 at 07:17 PM.
Reason: Pictures added
|
|
Trader Rating: 36
|
|
|
Someone moved my stuff and it looks like the damn rat sized dog got to my board. All I found was the wire harness. The board is torn up...
|
|
|
Trader Rating: 23
|
|
|
Turn your dog into a quadcopter then! You could then call yourself artist, like the cut guy!
|
|
|
Trader Rating: 36
|
|
|
I'm completely against what he did, but I might consider it here.
|
|
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Sold | Hextronic 2 gram Outrunner w/ TGY DP 3A 1S 1 gram ESC | jrej | Aircraft - Electric - Micro & Indoor Airplanes (FS/W) | 4 | Mar 16, 2012 03:48 PM |
Found | (2) 2 gram BL motors. | nemoskull | Aircraft - Electric - Micro & Indoor Airplanes (FS/W) | 0 | Mar 12, 2012 06:02 AM |
Wanted | 2.4 SuperMicro 3.5a BL ESC (x4) | boredom.is.me | Aircraft - Electric - Micro & Indoor Airplanes (FS/W) | 3 | Mar 08, 2012 07:56 AM |
Sold | Eflite 450 BL Motor, Eflite Speed Controls, Atlas BL Motor, ESC, Rimfire 300 - $50 | tonebone | Aircraft - Electric - Power Systems (FS/W) | 5 | Jan 24, 2012 03:19 PM |
Discussion | 2 BL Motor's, 2 BL ESC's, 1 ESC hotter than the other!!?? | Stuart Warne | Electric Power Systems | 8 | Nov 26, 2007 12:45 PM |