I just wanted to let DJI NAZA owner know that DJI is coming out with a GPS MODULE for the NAZA FC I just preoder on from
http://www.ebay.com/itm/221032039062...84.m1497.l2649 other shop also are selling them also. I don't know about anyone eles but I am so glad because what DJI has created with the NAZA FC is pretty awesome and now we/NAZA owners will be able to enjoy all the benefits of the GPS features. Thanks for your time and happy flying

Just as a side note for everyone...

DJI may also be coming out with an OSD??? I talked to Robert (DJI-USA) and he couldn't confirm but we should know more here soon!

Not trying to threadjack you skyhulk... Just trying to let anyone who has a DJI know so they can wait and see if everything pans out before they pick up a OSD and then DJI releases one. I HATE IT WHEN THAT HAPPENS! Or you buy something for $100 and next week it's on sale for $75!

no problem and thanks for the info that's what I hope would happen and also that's good news. I'm just excited that DJI Naza fc is getting a gps module and maybe a OSD which i hope happens

whats included in the order? do u get a mast or a controller? i have the standard naza controller on my f-550 do u just get a gps module and plug it into your existing naza controller? nim confused

Yes you get the mounting hardware (including mast) and it just plugs right into your Naza.

It's an awesome upgrade, but this thread should probably be moved, since it's really not anyone selling anything...

yes but it's under found, and what's found is this awesome info, considering i did not know and had to stumble on it.

got my order in thanks for the heads up

Yup, no problem I got mine today and install but needing alitte help if anyone has a spektrum dxi6

got my naza gps upgrade and all i can say is WOW , will post a short video shortly

Hi all, I am new to the forum and have a FlameWheel 450 with GPS but I have no idea how
to set the GPS up. I don't know electronics, so a step by step would be most appreciated. I can fly the 450 without the GPS no problem but would like to have something for out of sight
return if needed (assumeing the battery doesn't give out). So any help would be greatly appreciated and much needed. Thanks in advance. Also need help with switch selection and failsafe.

Originally Posted by Dragoneyes

Hi all, I am new to the forum and have a FlameWheel 450 with GPS but I have no idea how
to set the GPS up. I don't know electronics, so a step by step would be most appreciated. I can fly the 450 without the GPS no problem but would like to have something for out of sight
return if needed (assumeing the battery doesn't give out). So any help would be greatly appreciated and much needed. Thanks in advance. Also need help with switch selection and failsafe.

Did you buy the GPS afterwards or did the Naza come with the GPS. If the GPS is a new addition you'll need to update the Naza firmware to support the GPS (from DJI's website - get the latest Naza assistant and it will download the new firmware automatically during the Naza setup). Make sure your GPS is fitted to your copter and plugged into your Naza. It should connect automatically and be recognised once the new software is installed.

Follow the instructions on the latest Naza manual (from DJIs website). Make sure the arrow on the GPS faces forwards (the side with the cable is the front). Follow the steps to setup a 3 position switch for GPS/ATTI/MAN (will depend on your radio), calibrate the compass. If the copter wont fly in a straight line with GPS or wants to 'toilet bowl' when hovering with GPS rotate your GPS in the opposite direction to compensate.

For RTH, progarm a switch to allow manual RTH setting then bind your RX in failsafe mode with the RTH switch selected. Your RX should take that switch setting as its failsafe setting (will depend on your RC system). Use the Naza assistant to confirm failsafe works with the radio switched off.

For more detailed information go to the "Naza GPS Owners" thread at
https://www.rcgroups.com/forums/show....php?t=1666903