Thread Tools
Old May 31, 2012, 02:34 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
Discussion

Need help with a plane choice


does anyone know what would be a tough, EPP foamy that would run well on these components? i also need a prop suggestion. if the motor is too low of a kv i can get a different one. (Turnigy 80g Park480 1020 kv)
Power 15 950 kv, parkzone version
30 amp ESC
two metal gear servos
two nylon servos (smaller than the metal gears)
Y-harness
AR600 RX
3S 2200 mAh 25C lipos

i was looking at the telink 44" extra slick or 44" edge 540, would those work?
Last edited by RCAddict16; May 31, 2012 at 03:11 PM.
Sign up now
to remove ads between posts
Old May 31, 2012, 03:36 PM
WickedFunRC is offline
Find More Posts by WickedFunRC
WickedFunRC's Avatar
At 152g the Power 15 would be heavy for the Telink IMO. The Park480 would be more suitable in terms of weight, I can't speak to the 480's performance.

The Power 15 could go into a 58" Hacker Super Zoom XXL, but you'd want to prop it to at least 450 watts so a 40A-45A ESC would be recommended. If you have the make/model of servo's you have that would help.
Site Sponsor
Latest blog entry: Latest Video's
Old May 31, 2012, 03:47 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
i was also looking at the HK 65g Turnigy Outrunner , its a 1450 kv. i think a 10x3 prop would work.
Old Jun 01, 2012, 06:39 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
450 watts and 45 amp ESC? coincidence or do you get amps by dividing watts by 10?
Old Jun 02, 2012, 11:25 AM
WickedFunRC is offline
Find More Posts by WickedFunRC
WickedFunRC's Avatar
Quote:
Originally Posted by RCAddict16 View Post
450 watts and 45 amp ESC? coincidence or do you get amps by dividing watts by 10?
10 would be the voltage. Amps = Watts/Volts. It's a rough calculation assuming a 3S battery.
Site Sponsor
Latest blog entry: Latest Video's
Old Jun 02, 2012, 01:11 PM
RCAddict16 is offline
Find More Posts by RCAddict16
Suspended Account
oh ok....... could i use the telink though? im gonna use an 11/5 prop


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need help with a price to sell a large rc plane GavinR Vintage & Old-Timer Designs 19 Dec 13, 2015 02:58 AM
Discussion need help with plane ID Holderlin Fuel Plane Talk 9 Jul 01, 2015 02:44 AM
Help! Help with plane choice JRAllen 3D / Fun Fly Fuel Planes 2 May 17, 2012 07:30 PM
Help! Need help with a price to sell a large rc plane GavinR Electric Plane Talk 18 May 06, 2012 06:37 AM
Help! help needed with fan choice please ! kinghelichopter Scratchbuilt EDFs 51 Nov 10, 2011 06:35 PM