Help me Identify/Replace this Brushless Motor - RC Groups
Thread Tools
May 28, 2012, 04:44 PM
Registered User

Help me Identify/Replace this Brushless Motor

I recently burned out this motor that was being used in my Trojan, and was wondering if anyone could help me find it online or possibly have one for sale. I purchased it used so I don't know that much about it, all the can says is Hyperion Hp-Z3013-14. Also, if someone has a motor that would work in its place, let me know. I have been using this with a 36amp thunderbird ESC, and a 3 cell 2200 with props around 10x7. Also, if someone would like to purchase this motor, let me know. It just needs to be rewound but I don't think I'd be able to do that. Or, if someone is willing to rewind it, let me know what you would charge.

Sign up now
to remove ads between posts
May 28, 2012, 04:55 PM
Senile Member
Lnagel's Avatar
Here are the specs for the motor. It's rated at 22 to 32 amps with a 40 amp burst. It weighs 110 grams and has a Kv of 1085. Just look for a replacement motor with similar specs.

May 28, 2012, 07:23 PM
Registered User
Dr Kiwi's Avatar
If you don't need the narrow nose/glider shape, this should be pretty close:
May 28, 2012, 07:34 PM
JimNM's Avatar

try here...

With the reverse mount in place, I suspect that he does not need the tapered bell as that is designed to fit in the narrow nose of gliders.

Data sheet here...

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Help me identify this plane I inherited in 1997 PsychoDragon Classic Pattern Flying 13 May 24, 2012 10:54 AM
Found Can someone help me identify this? wing881 Aircraft - Sailplanes (FS/W) 22 May 20, 2012 08:48 AM
Question Can someone help me identify this car indycobra Off-road Cars 7 Apr 05, 2012 01:23 PM
Help! Help me identify this Comparf Extra..... trevoryoung00 Giant Scale Airplanes 1 Dec 06, 2011 10:24 PM
Discussion Someone help me identify this MWC board WiseDuck Multirotor Drone Talk 5 Dec 04, 2011 10:37 AM