Spidex quadcopter frame with gopro mount - Page 5 - RC Groups
Thread Tools
Jul 28, 2012, 10:02 AM
Kiwi in Germany
whakahere's Avatar
from what I see in the video they are using it. So yes.
Sign up now
to remove ads between posts
Jul 28, 2012, 10:07 AM
Registered User
OK, You using it on interior of the camera mount without screw?
Jul 28, 2012, 05:53 PM
Registered User
Yosegon's Avatar
Hello, I think in the video he uses this lens http://www.fpvmanuals.com/layerlens/
Jul 28, 2012, 07:34 PM
Registered User
Yosegon is right, In my frist video with the V1 I use this one

http://www.fpvmanuals.com/layerlens/

to protect the gopro,

but in V2 you can use the standard replacement lens from gopro

http://es.gopro.com/camera-accessori...placement-kit/

. Itīs easy to install, just push the lens in to the hole and you are ready to fly. You can buy the replacement lens or do waht I did just change one of your standard gopro case and use it on Spidex.

P.D. A few more shots, and the video of V2 it will be ready.
Jul 29, 2012, 04:55 AM
Registered User
Quote:
Originally Posted by moriwaky
p.d. A few more shots, and the video of v2 it will be ready.
Yes!!
Jul 29, 2012, 05:12 AM
Kiwi in Germany
whakahere's Avatar
I am really liking the look of the copter. Where does the FC go now? Is it still on the top as before?
Jul 29, 2012, 05:34 AM
Registered User
Quote:
Originally Posted by whakahere
I am really liking the look of the copter. Where does the FC go now? Is it still on the top as before?
I use naza+gps and I put the FC inside the chassis. Is well protected with the antivibration mount.
Jul 29, 2012, 05:43 AM
Kiwi in Germany
whakahere's Avatar
Quote:
Originally Posted by moriwaky
I use naza+gps and I put the FC inside the chassis. Is well protected with the antivibration mount.
is there enough room for a board that is 35mm by 35mm like a copter control?
Jul 29, 2012, 05:56 AM
Registered User
It's possible to see the back part (NAZA + GPS on the antivibration mount)?
Aug 01, 2012, 06:33 PM
Registered User
My new video of the Spidex V2

Quadcopter Spidex V2 FPV, pushing the limits! (3 min 45 sec)



More info:


https://www.rcgroups.com/forums/show....php?t=1703538

I hope you enjoy it

Pd Naza ddonīt like to be upside down
Aug 02, 2012, 04:38 AM
Registered User
ralfrcgroups's Avatar
That's really a great video!
Some questions regarding the frame:
- Is the spidex V2 frame foldable so that you can easily take it with you on holidays?
- Or if it's not foldable, is there a chance to easily disassemble it for transport?
- As I'm not able to understand Spanish - what comes with the Spidex offered at the quaternium shop (what do I need besides the electronics to have it ready for flight?)?
Aug 02, 2012, 09:28 AM
Registered User
You can make it semi foldable just removing 4 screw. But itīs not designed to this. Anyway isn`t to big and you can carry easily.
On Quaternium shop you can buy the frame, hardware (props, motors, esc...) except the flight controller.
Aug 02, 2012, 02:11 PM
Registered User
ralfrcgroups's Avatar
TX. Is there a chance that you can post a picture with the frame being 'semi' folded? - I would really like to see how it looks folded (and what's its size being folded)
So the frame for 65€ is including arms and including the GoPro mount, isn't it?
Aug 02, 2012, 05:17 PM
Registered User
Quote:
Originally Posted by ralfrcgroups
TX. Is there a chance that you can post a picture with the frame being 'semi' folded? - I would really like to see how it looks folded (and what's its size being folded)
So the frame for 65€ is including arms and including the GoPro mount, isn't it?
I am not the seller I am just the pilot tester but the designer and manufaturer of this frame is a Jlcortex a very good friend of mine so I can answer you .

The price is 65 euros with all the hardware you need (arm and gopromount include without servo)

I think you can have an idea how to make it foldable with the picture attached , just need a little modification on frame making two screw holes deep to avoid rub their heads when you move the arms
Aug 04, 2012, 03:16 AM
Registered User
Why doesn't it have the same distance between the front arms and between the aft arms?
Any special reason for this?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product GOPRO FPV Spider Quadcopter V4.0 + Anti Virbation Mount (NEW Pics Updated 15Apr2012) DiVidesign Multirotor Drone Talk 98 Nov 05, 2013 06:12 AM
Build Log *NEW* X468 FlameGear GoPro Camera Mount/LG For DJI Flame Wheel Frames(Build Log) Z06 Tony Multirotor Drone Talk 293 Jan 07, 2013 08:26 PM
Video Quadcopter flight with gopro mop Electric Heli Talk 0 Jan 23, 2012 08:04 AM
Sold RC-Carbon 650mm Y6 frame with GoPro mount Sid3ways Aircraft - Electric - Multirotor (FS/W) 22 Aug 19, 2011 08:24 PM
Discussion Testing X468 Frame with GoPro mount cdi3d Multirotor Drone Talk 53 May 05, 2011 06:31 PM