How to make thinned goop? - RC Groups
Thread Tools
May 21, 2012, 11:29 PM
Registered User

How to make thinned goop?

Hello All,

Would someone please share the recipe/procedures for thinned goop? What is the best type of goop? How long is the working and cure time? Thanks for your time!

Sign up now
to remove ads between posts
May 22, 2012, 12:25 PM
Registered User
Go to the paint store and buy a quart of XYLENE (sometimes sold as Xylol). It's FLAMMABLE (just like Goop) so be careful.

Try diluting about 1 to 1, and then adjust the amount of solvent to get the viscosity you want.

You can also use TOLUENE (also sold as Tolulol). This solvent is more volatile (evaporates faster) and will have a shorter working time.

Test EITHER solvent on the material you want to glue. The solvents ATTACK some foams.

Generally, polystyrene foams (Blue core, Home Depot foam, etc.) will be dissolved by these solvents. EPP (expanded poly propylene) will be OK with these solvents.
May 22, 2012, 10:59 PM
Registered User
Thanks Steve!
May 22, 2012, 11:33 PM
Registered User
Terror Dactyl's Avatar
both of those are serious stuff and make sure you are very ventilated. If you see a difference how you feel or ability to see then get your butt to a doc-in-the-box asap.

In my thirty something days I was an EMT and got to transport a couple of folks from those fumes.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert California to ban toluene and xylene; how do we thin Goop now? sonny1 Slope 31 Oct 08, 2013 09:13 PM
Question How thin Goop for covering EPP wing? 4444 Slope 4 Oct 08, 2006 11:32 PM
Discussion How to make/get really thin foam? Cheesehead Foamies (Kits) 16 Jul 25, 2006 11:22 PM
Question Like Goop, but more thin and spreadable?? Butch777 Electric Plane Talk 11 Mar 22, 2006 09:44 AM
Discussion Anyone done Kevlar thin goop'd to EPP? ave Slope 4 Jan 22, 2006 08:51 PM