HoverflyGIMBAL settings thread - Page 9 - RC Groups
Thread Tools
Jul 03, 2012, 12:56 PM
manual flying apologist
Adidas4275's Avatar
i understand what you are saying and i know you feel you have been burned in the past. I also know there are many others that feel the same way you do from the past.

I can say for the year i have used their products they work as advertised (with the exception of some bugs, which all companies have)


I can also say that I have never dealt with a company that has been more upfront with their firmware updates and problems associated with their products.

When comparing them to the other major flight controller companies in the industry they are way more upfront with their issues.

I have seen, over and over again, where are customer identifies a problem with the firmware and the HF team looks into it and then releases a new firmware beta that addresses the issue.

I have never seen the competition in this industry do this for one single customer.

many others in this industry are closed off, never release what is in their firmware updates other than some generalizations, and blame users rather than help them get their product working.

Can you call the competition and get support from a real person ?


You cynicism seems to be from the past and I cannot comment on the past, only my own experiences from the present.





still..... you are slandering HF based on nothing...

it would be different if you had proof that it didnt work, but you are saying it doesnt work because there is no proof that it does work..... IMO that is not a fair criticism.

Dont buy it since they are not showing you what you want.... but trying to "warn others" is an attempt to hid you own feelings about the company.
Sign up now
to remove ads between posts
Jul 03, 2012, 02:08 PM
Registered User
nicnaimless's Avatar
Quote:
Originally Posted by Adidas4275
i understand what you are saying and i know you feel you have been burned in the past. I also know there are many others that feel the same way you do from the past.

I can say for the year i have used their products they work as advertised (with the exception of some bugs, which all companies have)


I can also say that I have never dealt with a company that has been more upfront with their firmware updates and problems associated with their products.

When comparing them to the other major flight controller companies in the industry they are way more upfront with their issues.

I have seen, over and over again, where are customer identifies a problem with the firmware and the HF team looks into it and then releases a new firmware beta that addresses the issue.

I have never seen the competition in this industry do this for one single customer.

many others in this industry are closed off, never release what is in their firmware updates other than some generalizations, and blame users rather than help them get their product working.

Can you call the competition and get support from a real person ?


You cynicism seems to be from the past and I cannot comment on the past, only my own experiences from the present.





still..... you are slandering HF based on nothing...

it would be different if you had proof that it didnt work, but you are saying it doesnt work because there is no proof that it does work..... IMO that is not a fair criticism.

Dont buy it since they are not showing you what you want.... but trying to "warn others" is an attempt to hid you own feelings about the company.
Customers should never have to carry the burden of proof for the products. Products should be proven by manufacturers and well tested prior to selling and promising features. I an a bit jaded by Hoverfly but for good reason. Thought they might redeem themselves but.........
Jul 03, 2012, 02:56 PM
Registered User
So instead of wasting time on tgis chatter... Hows the new firmware? Any improvement on roll yaw
Jul 04, 2012, 01:16 AM
Registered User
Got in 2 minutes lol. Firmware. 98, i had no loss of horizon on tilt or roll, mind you it was dark and my settings are rough. In a happy camper, thanks HF
Jul 04, 2012, 01:28 AM
manual flying apologist
Adidas4275's Avatar
good to hear, i have to get mine updated tomorrow.... i will be filming tomorrow

been editing all night
Jul 04, 2012, 02:11 AM
Registered User
i spent a nit more time on the computer with live out to tv, its close on the ground now. I will focus some more on my hexa gains then assign a channel to my tilt and start havin some fun
Jul 04, 2012, 12:43 PM
Registered User
GGoodrum's Avatar
I'm not anywhere I can upgrade my HFG board, at the moment. What are the changes in v0.98? There's nothing on HF's site about this update.

-- Gary
Jul 04, 2012, 01:08 PM
manual flying apologist
Adidas4275's Avatar
Al said that it was the accumulation issue with holding the horizon level on roll.
that is what i know.
Jul 04, 2012, 03:46 PM
Registered User
flytahiti's Avatar
how could i upgrade gimbal firmware . i have upgraded the setup client to 0,98 but not the gimbal software. and nothing change for me ,still roll drift. do i need to recalibrate?
Jul 04, 2012, 04:00 PM
Registered User
Goto hoverflys support page and get the firmware update client plug it in and fllow instructions on screen and u should b good to go
Jul 04, 2012, 04:20 PM
Registered User
flytahiti's Avatar
i have done that but when it ask to select a board there is no board to select
Jul 04, 2012, 04:35 PM
Registered User
flytahiti's Avatar
on the hover fly gimbal configurator v0,98 i read hardware version "gimbal 1.0 " software version " ver 0.91 (007)
Jul 04, 2012, 04:47 PM
Registered User
flytahiti's Avatar
is it the same firmware update client for HF pro and HF gimbal ?
because i can't select any board
Jul 04, 2012, 05:56 PM
Al Ducharme
photronix's Avatar
Yes it's the same update client for all of our products.

If you can't see any board selections then you may not be connected to the Internet or you need to update the firmware update client.

The major change in the software is an added smoothing on user controlled movement. You can adjust it in the HFG configurator. The behavior is similar to ramping up and ramping down the movement speed.
Jul 04, 2012, 06:21 PM
Registered User
flytahiti's Avatar
internet is ok update client is v1.00.29 and it doesn't works it bug on "select board"


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DJI Wookong-M Owners Thread *Pics*Videos*Settings* Z06 Tony Multirotor Drone Talk 1793 Jan 26, 2017 03:31 PM
Discussion HoverflyGIMBAL Demonstration Videos photronix Aerial Photography 10 May 18, 2012 04:53 PM
Link HoverflyGIMBAL Manual and Setup Client hoverben Aerial Photography 1 May 17, 2012 03:25 PM
Discussion HoverflyGIMBAL - Input Voltage? Manual? defxxx Aerial Photography 10 May 17, 2012 02:54 PM
New Product HoverflyGIMBAL - Now Shipping! photronix Multirotor Drone Talk 9 May 15, 2012 01:46 PM