Shop our Airplanes Products Drone Products Sales
Jul 03, 2012, 10:10 PM
Registered User
OK here is what I started.
https://www.rcgroups.com/forums/show....php?t=1684605

Thank you for the plan site-very helpful.

Now I need to decide how to power. Electric or glow?
Sign up now
to remove ads between posts
Jan 01, 2013, 04:12 PM
AndyKunz's Avatar
A little update to resurrect this thread, and another request...

Our club is building a Kadet this winter at 150%.

We're building it as a candy bomber, among other tasks. The bomb bay should pack enough sugar for lots of tots - it's about 6 x 15 x 8 (the entire area below the wing).

The fuselage is almost done now, and I (finally) realized I don't have a pattern for the windshield. Anybody have one they can scan and post?

Thanks!

Andy
Jan 01, 2013, 05:41 PM
pd1
pd1
Registered User
Will this help?

Cut the pattern out of paper and trial fit, If it doesn't let me know and I'll redo it.

The 150% pattern was incorrect. I redid it, should be the correct size now.

Paul
Last edited by pd1; Jan 02, 2013 at 07:24 AM.
Jan 02, 2013, 08:39 AM
AndyKunz's Avatar
Thanks, Paul. I'll let you know!

Why did I suspect you'd be the one with the answer?

Andy
Jan 02, 2013, 07:07 PM
Edubarca
Edubarca's Avatar
Anybody has the Kadet Mk. II? This is the model I want. Thanks
Jan 03, 2013, 07:42 AM
pd1
pd1
Registered User
Quote:
Originally Posted by Edubarca View Post
Anybody has the Kadet Mk. II? This is the model I want. Thanks
I have a partial kit of the Kadet mk II downstairs. I'll check to see if the plans are there too.

Paul
Jan 03, 2013, 08:07 AM
Edubarca
Edubarca's Avatar
Quote:
Originally Posted by pd1 View Post
I have a partial kit of the Kadet mk II downstairs. I'll check to see if the plans are there too.

Paul
Thanks a lot!! I'll be looking forward to it. Just in case this is my email:
edubarca1946@gmail.com
Jan 04, 2013, 03:26 PM
pd1
pd1
Registered User
I found the Kadet MK II plans. Unfortunately the plans were cut up for building.
I will scan them and reassemble the plans sections to make a plan available but it will take a little bit of time to do so.

When the plan is done, I will post a message here. If anyone who wants a copy, I'll just need an e mail address. Please state the plane that you are looking for the plans for.

Paul
Jan 04, 2013, 03:47 PM
Registered User
How about right here....post #15. I didn't see page 2!
Last edited by JohnAV8R; Jan 04, 2013 at 03:49 PM. Reason: didn't read!
Jan 06, 2013, 03:31 PM
Balsadustus Producerus
And Fiberglass Specialties has the cowl if Sig doesn't:

http://fiberglassspecialtiesinc.com/catalog.htm

Look around for the listing--I couldn't get you the direct address to the cowl.

Or just make one out of balsa block.
Jan 06, 2013, 04:56 PM
Edubarca
Edubarca's Avatar
I will make the cowling out of balsa block. Much more fun
Jan 07, 2013, 06:41 PM
pd1
pd1
Registered User
I've finished the plans for the Sig Kadet Mk II.

If anyone wants them, send me a PM with your e mail address.
Note what plans you are looking for in the subject box.

Paul
Last edited by pd1; Jan 08, 2013 at 07:21 AM.
Jan 25, 2013, 10:34 PM
Culper Junior
Pardon for jumping on this thread but could someone tell me the difference between all the regular Kadet's and the Kadet LT's?
Jan 27, 2013, 05:42 PM
Edubarca
Edubarca's Avatar
I think you can post it here. Good luck!!
Jan 30, 2013, 07:57 AM
Moe Emam

Paper size


Hi there,

Would you please let me know the paper size that should print on it to get the accurate size?

Regards,
M. Emam


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Need Stabilizer Section of Sig Kadet Senior Plan rikirinaldo The Builders Workshop 12 Oct 02, 2014 06:05 PM
Need to Sig Kadet LT-40's plan and manual rikirinaldo Beginner Training Area (Fuel) 15 Apr 27, 2013 01:05 PM
Discussion sig? kadet sr rebuild sweatybetty Fuel Plane Talk 15 Mar 23, 2012 02:12 PM
Sold sig kadet seniorita RTF LPU TAMPA FL maverick pro Aircraft - Electric - Airplanes (FS/W) 4 Mar 12, 2012 07:01 PM
Help! sig kadet senior andrew wallace Fuel Plane Talk 1 Feb 26, 2012 02:10 AM