Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 24, 2012, 05:53 AM
Registered User
tigar's Avatar
I fly my other multis with 4s 5000 mah. On a 3.2 kgr bird I have about 6 minutes flight time.
I haven't finish this yet.
Sign up now
to remove ads between posts
Sep 24, 2012, 06:01 AM
kitesurfer
i ran 4s 5000mah on a y6 setup on 1147 props.
getting 8-9 mins flight
Sep 24, 2012, 08:32 AM
Registered User
Ok so should I buy this frame or not?
Sep 24, 2012, 09:11 AM
Registered User
Only if you are really interested in the middle "ecilop" camera mount.
If not, could be better frames for $129.
Sep 24, 2012, 09:58 AM
kitesurfer
quite alot of flex in the frame, cam mount isnt very easy to adjust, so hard to balance the system. i got a v2 coming so will let u know if its any better
Sep 24, 2012, 11:24 AM
Registered User
Where buy that v2 ?

Any video from that version?
Sep 24, 2012, 11:57 AM
Registered User
Quote:
Originally Posted by pabloreg
Where buy that v2 ?

Any video from that version?
I think if you order now you get the v2.
At least i hope so. I place my order one week ago and i hope i get the v2 version.
Fredde
Sep 24, 2012, 02:06 PM
x23
x23
Registered User
Quote:
Originally Posted by pabloreg
Where buy that v2 ?
Yes Tokaz is right. They don't sell the V1 anymore. So if you order you'll get the V2.

Quote:
Originally Posted by FAST
HEY BUYCHINA.
WHY DON'T YOU ANSWER MY E-MAILS????????
Maybe because you're screaming Be patient, they'll send you a link to pay on taobao...

Quote:
Originally Posted by RENATOA
I am balancing now between switching to Alu tubes, or ordering more serious 1mm wall thick carbon tubes, these:
http://www.hobbyking.com/hobbyking/s...mm_2_pcs_.html
Aren't those tube too big ? It seems the OD is 14 not 12mm right ? How wide was your config motor to motor ?

Quote:
Originally Posted by Jodde73
This came up the other day, is it the "v2" version?
http://www.goodluckbuy.com/mini650-m...ount-ptz-.html
No that's the V1. Look at previous page (39-40) to see V2 pictures.

Quote:
Originally Posted by Ramnes
RENATOA
I like that solution for the ESC's! I just have to drill holes in the plastic so the wires can run inside the steel tube. Thanks!
Jorn
I agree, nice solution. I'll think I'll copy you
Sep 24, 2012, 02:18 PM
Registered User
Quote:
Originally Posted by x23
...Aren't those tube too big ? It seems the OD is 14 not 12mm right ? How wide was your config motor to motor ?
...
Oups... you mean talon V2 tubes are 14mm ?!!!
Must check, thank you, you saved me $30 if true.

I have now 650mm between motors.
Sep 26, 2012, 12:16 PM
x23
x23
Registered User
That's what says the first comment on the page.
What about those tubes?
Sep 26, 2012, 02:55 PM
kitesurfer
why is carbon tube so important? what is wrong with the alu tubes.

its the frame which flexes, not the arm. and the standard tubes weigh nothing
Sep 26, 2012, 03:05 PM
Registered User
@x23: Those tubes are protruded, i.e. all fibers are longitudinal, no twill, and the resistance is not good for flexing them.

Ali, importance is in the eye of beholder
Overall is about 70g save for quad or 100g for hex.
Sep 26, 2012, 04:11 PM
kitesurfer
fair.

im intrigued at the flight times people are getting. with a Y6 setup i am getting 9mins flight time.
what are people getting in a hex setup.

im also interested what flights i will get with the same motors and props, but on my ecilop.
all 1147 gemfan props
Sep 29, 2012, 03:15 PM
Still flying
Ramnes's Avatar
Quote:
Originally Posted by RENATOA
Not the legs breaks, but the clips to body pipes.
I came up with this idea. If it holds a heavy wind landing i dont know, but if thats the weak part i think two of this cable ties will do the job until it's possible to buy new ones.

Jorn
Oct 03, 2012, 04:26 AM
Still flying
Ramnes's Avatar

Mini 650 Instruction version II


Here are the Mini 650 Instruction version II.

EDIT: Nope, file to big. But Eddy is hosting the file at the link below.

http://comicflyer.de/4downl/Mini650I...nversionII.pdf

Jorn
Last edited by Ramnes; Oct 06, 2012 at 02:15 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product NEW Carbon-Glass-Alu SCORPIO Mini HEXA Frame (WITH PLANS) mifau Multirotor Drone Talk 49 Mar 05, 2013 01:40 PM
Sold RC Carbon Y-6 Carbon Fiber Folding Frame Adidas4275 Aircraft - Electric - Multirotor (FS/W) 2 Apr 22, 2012 10:44 PM
For Sale Hexa Glass Fiber Frame for DIYer (without power unit) kevinlib Aircraft - Electric - Multirotor (FS/W) 11 Apr 14, 2012 10:48 AM
Discussion carbon fiber frame vs fiber glass frame? ChatXT Multirotor Drone Talk 1 Feb 09, 2012 02:38 AM
For Sale TRex 450 Frame Carbon Fiber CNC full frameset MJW2006 Aircraft - Electric - Helis (FS/W) 2 Sep 25, 2007 05:12 PM