50mm FSW - EDF - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 20, 2012, 11:42 AM
Registered User
blueman's Avatar
Build Log

50mm FSW - EDF

Hello all, I think it's been about 7 years since I've been here on rc groups. Been busy and kinda fell out of the hobby. So this is what I am building to get back into the air. A custom eye-balled FSW with a Dons RC Wemotec/5400kv/30 amp esc/ 3cell -800mahx 2ea in parallel. Should burn a whole in the sky, I hope. A little dodgy on how to figure out the CG though, any input would be greatly appreciated, anything to help me from burying this in the dirt in 5 seconds.
Sign up now
to remove ads between posts
May 20, 2012, 02:36 PM
Registered User
sorry did't see FSW look's good you need to get rid of foam in exit of fan
Last edited by space 1; May 20, 2012 at 02:49 PM.
May 20, 2012, 02:42 PM
Registered User


you could mount battery one on each of fan
Last edited by space 1; May 20, 2012 at 02:53 PM.
May 20, 2012, 02:54 PM
Aka: Tom Jenkins
ApexAero's Avatar
Blue man I can calculate your CG for you if you tell me the wing span, root, and tip measurements. Also accurate sweep measurement on main wing at leading edge. I prolly have more experience with SFW than a lot of fellows the past 11 yrs alone. I'll volunteer.
May 20, 2012, 03:47 PM
Registered User
Joe 1320's Avatar
Looks cool.
May 21, 2012, 01:36 AM
Registered User
cytochrom's Avatar
Its good to see you back !

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold LPU in San Antonio area: 50mm JPower EDF Jets FoamJunkE Aircraft - Electric - Airplanes (FS/W) 2 Jun 20, 2012 07:57 AM
Build Log FSW EDF 50mm blueman Foamy EDFs 7 May 25, 2012 04:46 AM
Sold NIB 1.97 50MM EDF Housing warbirdguyn951 Aircraft - Electric - Power Systems (FS/W) 4 May 20, 2012 11:35 AM
Found Need 50mm EDF gasturbineman Aircraft - Electric - Jets (FS/W) 0 Mar 06, 2012 05:15 PM
Sold MB-1, Wemotec 50mm, JPower 50mm edf units FS FoamJunkE Aircraft - Electric - Power Systems (FS/W) 0 Feb 01, 2012 10:09 AM