Shop our Airplanes Products Drone Products Sales
Thread Tools
Old May 16, 2012, 04:37 PM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar
Discussion

micro_crash


Just thought I'd share a few pictures of my new plane...it's a plans built micro-wave by Rich U. I'm waiting for a WM300 EDF to provide power.
It's conventional balsa & lit ply w/ balsa covered foam wing. I cut all the parts out by hand, not a lot of parts, tho'...I'm using Corona MG micro digital servos on the ailerons and a T-Pro MG90S for the elevators w/a Spektrum 2.4 rcvr and an Exceed 60A ESC. I need to put a hook on the bottom as I intend to bungee launch this plane. Should be a nice easy everyday flyer, at least I'm hoping.
Last edited by 335driver; Jun 24, 2012 at 01:40 PM.
Sign up now
to remove ads between posts
Old May 16, 2012, 04:41 PM
RC Trainer plane is offline
Find More Posts by RC Trainer plane
Balsa builder and balsa basher
RC Trainer plane's Avatar
nice little plane mate and nice colour scheme
Old May 16, 2012, 05:38 PM
space 1 is offline
Find More Posts by space 1
Registered User
look's good
Old May 18, 2012, 11:47 AM
bwoollia is offline
Find More Posts by bwoollia
bwoollia's Avatar
Looks good! What size motor are you going to use with the WM300? Do you have a plan to make a thrust tube?

Brian
Site Sponsor
Latest blog entry: Crash Compilation
Old May 21, 2012, 06:06 PM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar

motor


I got a megamotor that I'm going to try. Right now, I've using a 64 mm w/a 3750 kv motor. I actually test flew it today. It was way too sensitive on ailerons and it cartwheeled when I landed and damaged the nose slightly. A hour or so should fix it up. I'll cut down the throw and try again soon. It actually flew great, it was pretty fast on just a 3S 2450mAh batt. I think I'll start fixing it right now. So, so long for now.
Old May 22, 2012, 03:45 PM
Rich Uravitch is offline
Find More Posts by Rich Uravitch
Registered User
Rich Uravitch's Avatar
Hey, 335 Driver,
Congrats on the successful first flight. Hope you have many enjoyable flights on your Microwave!
Rich
Old May 23, 2012, 05:55 PM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar
Rich, thank you for your comment, I'm sure I will have a great time flying it. I discovered later that I had set the radio up in a Delta configuration, probably accounted for the rather touchy flight. I repaired the damage, set the radio up correctly and tried again yesterday.
This time the flight was much easier and more easily controlled. One of the rear extensions was damaged on landing, in part I believe because I did not tie them together as the plans showed. I have since tied them together and am looking forward to many flights. All things considered it is much quicker than a foam F-35 that I have and is fast enough for me.
Old May 23, 2012, 06:04 PM
bwoollia is offline
Find More Posts by bwoollia
bwoollia's Avatar
Any chance of seeing video of it flying?
Site Sponsor
Latest blog entry: Crash Compilation
Old May 23, 2012, 06:19 PM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar
See what I can do. I'll probably go out Friday or the weekend.
Old May 26, 2012, 06:19 PM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar
Here's a couple of videos of the launch and flight of the "new plane"
While the landing looks and is not the best, no damage was sustained.'
Enjoy and thanks for looking...

Dick
Old May 26, 2012, 07:54 PM
bwoollia is offline
Find More Posts by bwoollia
bwoollia's Avatar
I think you forgot to post them...
Site Sponsor
Latest blog entry: Crash Compilation
Old May 26, 2012, 10:05 PM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar
I need to get the YouTube addy and add them to my post. Not really sure how to do all this stuff. Bear with me. Thanks

micro_1.MP4 (0 min 49 sec)


micro_2.MP4 (1 min 23 sec)
Last edited by 335driver; May 26, 2012 at 11:03 PM.
Old May 27, 2012, 12:13 AM
bwoollia is offline
Find More Posts by bwoollia
bwoollia's Avatar
Nicely done!
Site Sponsor
Latest blog entry: Crash Compilation
Old May 27, 2012, 11:35 AM
335driver is offline
Find More Posts by 335driver
Registered User
335driver's Avatar
Thank you, bwoollia...as you may have heard in the video the controls are still way too sensitive (for me) I cut them in half and tried again but a bad launch caused some more damage so back to the repair shop. PS, it took all of 15 minutes to fix but I didn't have the necessary stuff with me at the field, which is about 45 mins. from my house. And it's ready to go again, perhaps Tuesday as tomorrow is Memorial Day and family picnic.
Old Jun 09, 2012, 02:55 AM
Erik v. Schaik is offline
Find More Posts by Erik v. Schaik
My project: FAIREY DELTA 1
Erik v. Schaik's Avatar
Nice Micro!

Because of poor field conditions early 2012 I couln'd maiden my Mini until recently.
I reduced the control throws as well and now it flys very easy.

enjoy!

Erik


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale NEW LOWER PRICE on BRAND NEW TWIN ELEC. CANADAIR CL-215 - FLOAT PLANE -NEVER FLOWN electric man Aircraft - Electric - Airplanes (FS/W) 3 May 12, 2012 02:21 PM
Discussion New Plane with new Airfoil launches 263 feet! ifome Hand Launch 8 Apr 02, 2012 01:07 PM
Discussion Great Planes new Sabre floes like a big plane Michael Heer Combat 1 Jan 27, 2012 08:05 AM
Discussion Old plane with old batteries or new plane with new lipo? yamabiker Electric Plane Talk 33 Jan 03, 2011 08:05 PM