Thread Tools
May 28, 2012, 08:37 PM
Registered User
and S-bus
Sign up now
to remove ads between posts
May 29, 2012, 06:25 PM
taking time on my ride
IFHELI's Avatar
And two sat. rx also......
May 29, 2012, 07:10 PM
taking time on my ride
IFHELI's Avatar
I was just making adjustments on my Heli and decided to check the vib. log since I went back to the Rave FBL head. It had a grand total of five hits show up and all extremely low vibs. When I had the Tarot head on it would show hits( mild to strong vibs.)) thru the whole flight almost. Since going with the CY tail blades there are no hits on the tail at all.
May 29, 2012, 07:13 PM
as much as I can
beenflying's Avatar
HK-Parts now has the 3GY v2 for $98.80:

http://www.hk-parts.com/alzrc-3gy-3-...stem-v2-0.html

I was also pleasantly surprised to be contacted by the new hk-parts customer service manager the other day. The whole site is getting a make over with more stock, lower shipping rates (as low as $2.70 tracked), faster shipping (in some cases same day) and same day replies to customer queries (allowing for the time zones of course).

I have to say I was pretty impressed with the guys whole approach to making customer satisfaction, his number 1 priority.
Last edited by beenflying; May 29, 2012 at 08:34 PM. Reason: Shipping was as low as $2.70
May 29, 2012, 07:16 PM
Registered User
Had a case of dumb thumbs yesterday. Crashed the heli with this gyro inverted. I have been using the vib monitor before the crash just to get an idea where my base vibs currently are. Pretty useful tool. Going to also play around with my new Align digital pitch guage.
May 29, 2012, 07:19 PM
Registered User
BF....good to see they updated the page too. I was wondering if they were still around. The Tarot kit comes with a very brittle canopy. Will be looking to get an ALZRC painted canopy as an upgrade.
May 29, 2012, 07:29 PM
taking time on my ride
IFHELI's Avatar
Sorry to hear about the crash.... The vib log is nice. I forgot to add that I used the same set of rotortech blades on both heads...

Good to know HK-Parts is carrying them also. I was going to order one from Sky Hobbies Singapore but shipping cost are unreal.
May 29, 2012, 07:33 PM
Registered User
Quote:
Originally Posted by IFHELI
Sorry to hear about the crash.... The vib log is nice. I forgot to add that I used the same set of rotortech blades on both heads...

Good to know HK-Parts is carrying them also. I was going to order one from Sky Hobbies Singapore but shipping cost are unreal.
rc711 should have them in stock too..
May 29, 2012, 07:38 PM
taking time on my ride
IFHELI's Avatar
I just wanted one with the Robird G31 orange label so I could compare the two.
May 29, 2012, 07:47 PM
Registered User
keris's Avatar
Thank guys for the info i didn't read the manual of Alzrc so it a great fbl unit maybe oneday i will try this gyro

thanks
May 29, 2012, 07:48 PM
as much as I can
beenflying's Avatar
Quote:
Originally Posted by beenflying
HK-Parts now has the 3GY v2 for $98.80:

http://www.hk-parts.com/alzrc-3gy-3-...stem-v2-0.html

I was also pleasantly surprised to be contacted by the new hk-parts customer service manager the other day. The whole site is getting a make over with more stock, lower shipping rates (as low as $2 tracked), faster shipping (in some cases same day) and same day replies to customer queries (allowing for the time zones of course).

I have to say I was pretty impressed with the guys whole approach to making customer satisfaction, his number 1 priority.
Can someone else log in to hk-parts and check the price of this item. I think you might be pleasantly surprised.

The new customer service manager said there was going to be discounts for registered customers. So I just checked again after logging in.
May 29, 2012, 07:54 PM
taking time on my ride
IFHELI's Avatar
yep... good little discount....
May 29, 2012, 08:45 PM
as much as I can
beenflying's Avatar
Quote:
Originally Posted by ridge_racer
Had a case of dumb thumbs yesterday. Crashed the heli with this gyro inverted. I have been using the vib monitor before the crash just to get an idea where my base vibs currently are. Pretty useful tool. Going to also play around with my new Align digital pitch guage.
Sorry to hear this. Hopefully not too much damage.

Quote:
Originally Posted by ridge_racer
BF....good to see they updated the page too. I was wondering if they were still around. The Tarot kit comes with a very brittle canopy. Will be looking to get an ALZRC painted canopy as an upgrade.
My favorite is still this one:


They do it in 450 V2 and 500, as well. I see they call it the ALZRC Devil 450 now, and are avoiding the T-rex.
May 29, 2012, 10:02 PM
Screwed Again My Friend
jombo's Avatar
Quote:
Originally Posted by beenflying
Lots of info on this link, including all 18 tutorials:
http://www.skyhobbies.com.sg/pagelin...RobirdG31.html

SGD$128 = USD$100
sweet , i have one on the way but didnt pay that much for it and sold in the U.S A.
May 29, 2012, 10:11 PM
as much as I can
beenflying's Avatar
Teaser! Where'd you get it from?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ALZRC Devil 450 PRO!! 3GY gyro ver 2.0.3 pitchp Mini Helis 7 Jun 10, 2012 10:30 PM
Build Log ALZRC 450 pro V2, More bling then JLo! Hot_Wheels Mini Helis 19 Mar 13, 2012 12:30 AM
Discussion ALZRC 450 Pro V2 FBL Radio and 3x1000 FBL placement electrojolt Mini Helis 2 Feb 05, 2012 06:28 PM