Thread Tools
May 12, 2012, 07:32 AM
Registered User
carbondragon's Avatar
Build Log

micro PC-7


Hello everyone.
I just introduce my youngest.
A micro Pilatus PC-7.
it is 40cm large for 46gr.
motorization 1s HobbyKing AP03 4200kv Brushless Micro Motor (3.1g).
controlling speed: TGY DP 3A 1S 1g Brushless Speed ​​Controller
baterie: 160mAh 1s
RC: Spektrum AR6400
Servo: HK-5320 Ultra-Micro Digital Servo 1.7g / 0.05sec / 0.075kg for the retractable gear.
Sign up now
to remove ads between posts
May 12, 2012, 08:15 AM
Registered User
carbondragon's Avatar
You can see the first video ...
this is the pc-7 of my friends Michel

Vol micro PC-7 (1 min 18 sec)


And the sistem that has retractable landing gear for its use

Micro PC-7 train rentrant (0 min 10 sec)
May 12, 2012, 08:52 AM
IWC
IWC
Registered User
....
May 12, 2012, 08:54 AM
IWC
IWC
Registered User
Very nice indeed. Is your PC-7 from a kit or plans?
May 12, 2012, 09:11 AM
Gary
gklein's Avatar
Wonderful! Tell us more about the retracts.
May 12, 2012, 09:27 AM
Way to many airplanes!
Wow, VERY NICE! The whole airplane look great, and yes, I'm also curious about how you did your retract system with only one servo (for 3 wheels!!!)
May 12, 2012, 10:54 AM
Registered User
carbondragon's Avatar
Well, I see you like it.
This is not a kit. I draw the plans.
the retractable landing gear is very simple.
I had already seen on other model.
It is very lightweight and easy to do.


new train 12.11.2011.mov (0 min 10 sec)
Last edited by carbondragon; May 12, 2012 at 02:37 PM.
May 12, 2012, 09:56 PM
Registered User
Wow, what an amazing plane and great details. Did you build the body from balsa?
May 13, 2012, 03:04 AM
Registered User
carbondragon's Avatar
hi Buratino,
the PC-7 is constructed so traditional.
I used Balza 0.6mm for body and horizontal tail and vertical.
for the wings I used 0.8mm Balza.
the nose is thermoformed as well as the nozzles.
the same for the canopy.
May 13, 2012, 04:42 AM
Crashing with style
deadbird's Avatar
Hi carbondragon, what an incredibly accomplished build! It's such an unusual subject and such an incredible finish. Those retracts are straight from the watchmaker!

That carbon prop looks fantastic too. Is that hand made or off the shelf?

Many thanks for sharing the build and the plans.
May 13, 2012, 04:56 AM
Registered User
carbondragon's Avatar
hi deadbird,
thank you for these complimnets
I use a propeller Microinvent 4.3/3.5

http://www.microinvent.com/mambo/ind...d=26&Itemid=45
May 13, 2012, 09:46 PM
Registered User
MUTCAKE's Avatar
Fantastic. Very, very good! Your attention to detail is excellent. You have a very good model there. My congratulations.
Keith
May 13, 2012, 09:52 PM
No more nicotine for me!
micro_builder's Avatar
Balsa, clean and detailed, and scratch built - hard to beat that. The retracts and pilots are a nice touch, whats the ready to fly weight? Thanks for posting the plans too.

Nick


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Use a 4g micro servo on my 2s (7.4v) setup? mmmatthew Flight Accessories 2 May 12, 2012 10:52 PM
Sold E-Flite 7.5-Gram Sub-Micro S75 Servo Marvie100 Aircraft - General - Radio Equipment (FS/W) 0 Mar 17, 2012 11:11 PM
Data Free Pilatus plans: PC-12, PC-21, etc joe_crash Foamies (Scratchbuilt) 2 Nov 08, 2011 04:34 PM
Alert Looking for Plan Pilatus PC-7/PC-9 Pierreke Scale Fuel Planes 5 Mar 21, 2011 06:02 AM
pc sim/micro rec/micro motor/box combo--4 sale foss1997 Aircraft - Electric - Airplanes (FS/W) 0 Aug 07, 2001 11:59 PM