F16 Pusher - Page 2 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by peter24, who may elect to delete unwanted replies.
May 19, 2012, 02:56 PM
if its not broke,fix it anyway
Biffda's Avatar
Getting there, should look good when it's done
Sign up now
to remove ads between posts
May 20, 2012, 03:41 PM
Registered User
Cheers biff
May 22, 2012, 01:56 PM
Registered User
Got my depron today, which turned up white, never mind, wont see it when it painted. Got a few skins on today, to see how hard it was going to be.
The hardest part is trying to keep it flat whilst glueing the skins on.
I need to get some servos in now before i can finish skinning the top,
Last edited by peter24; May 22, 2012 at 03:11 PM.
May 26, 2012, 04:12 PM
Registered User
I have gotten a little further, couple more skins on the top, and the bulkheads and a few skins added to bottom. The first skin around the intake didnt quite go as planned, so its left me a gap i have to try and fill somehow.
I really do need to get the tailerons made, and some servos in now.
May 27, 2012, 04:03 PM
if its not broke,fix it anyway
Biffda's Avatar
looking good, looking forward to seeing it finished
Jun 14, 2012, 02:28 AM
if its not broke,fix it anyway
Biffda's Avatar
Hi peter24 hows the F16 coming on,
Sep 23, 2012, 02:56 AM
Registered User
Not done anymore on The f16 since last update. Got as far a putting Servos in that tail, or trying to. I need to make it bigger. i could just scale up the plans when i print, but then all the slot sizes etc will be off so think a redraw is on The cards. Gonna do it over the coming months a i won't be flying as much. At least building the little one confirmed all the parts would fit as intended.
Oct 18, 2012, 01:00 PM
Registered User
Still working away on F16 mk2. going for ailerons on this one. Will post pictures soon.
Oct 20, 2012, 05:30 AM
Registered User
Couple of pictures of the new wing with aileron added, still need to add some extra gussets etc yet.

F16XL Left Wing Assembly 1 (0 min 16 sec)
Last edited by peter24; Oct 23, 2012 at 03:06 PM.
Nov 06, 2012, 04:12 PM
Registered User
Work is continuing, will be starting to do the drawings in the very near future, so i can start building
Nov 10, 2012, 01:25 PM
Registered User
Drawings have been started, goin to start building soon, so I can work out any problems etc. Should come out about 500-600grams with servos but minus power system. I want to be under 1kg auw.
Feb 10, 2013, 10:18 AM
Registered User
Quick shot of where im at.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Blitzworkz BZ-F16 -- pusher prop!!! WRXronald Pusher Prop Jet Models 10 Jun 09, 2012 12:28 AM
Discussion F16 Ultrafly Pusher Jet Charles61 Power Systems 0 Mar 05, 2012 09:38 PM
Discussion UltraFly F16 Pusher Jet Charles61 Foamies (Kits) 0 Mar 03, 2012 04:30 PM
Off Site Hobby Lobby F16 Pusher need CG location solarr Aircraft - Electric - Jets (FS/W) 2 Dec 16, 2011 07:20 AM
Sold UltraFly F16 Pusher Jet NIB imodel Aircraft - Electric - Airplanes (FS/W) 5 Nov 23, 2011 01:17 PM