Thread Tools
Jun 19, 2012, 02:26 PM
Registered User
I am still trying to get my GPS to work. I have recalibrated everything, starting at the beginning and checking the programming of each ESC, even though I have used this Hexa with a number of FC's and all worked well.

- The YS-X6 flies extremely well. The best FC I have flown yet, in Manual mode 1.
- Altitude hold (Mode 2) is the best I have also used, however, I do find that if you fly in Mode 2 and stop, and try and get it to hold position, it does want to continue on the path that you were originally flying. I am sure that this can be rectified quite easily, although it seems to be a common problem with a number of us.

-However, for me, GPS does not work at this stage. I have calibrated the compass more than 20 times over the last few days and I now have managed to get reasonably perfect circles, with the hoz circle a perfect centre but the vertical circle, also a perfect circle, is off centre. So we will try again tomorrow.

Does anyone know the importance of the GPS Velx / and Vely and what it means. My Velx and Vely are sometimes up in the 20...30...40

Rob
Sign up now
to remove ads between posts
Jun 19, 2012, 02:37 PM
Registered User
Quote:
Originally Posted by Reginak
Robone,

Yep, but they're not giving different features per vendor, it is a different firmware FIX per vendor. At least it looks like it.

And on another question since you're in contact with ZeroUAV, why can't we have the complete info of what each gain does. Its has been a month and we don't have a list of all the gains only some...
Well lets see what they say, because I have already asked them why.

As for the gains. I will ask them soon, but my discussions with them take time and I am still trying to resolve my GPS saga with them. This (my GPS) is important, because until I sort this out and understand what is causing the problem, I cannot sell the YS-X6, and I have plenty of people wanting to buy.
Jun 19, 2012, 09:27 PM
Registered User
Thanks to V. I have been having some good luck with this system.

I have built up some ready to fly quads with them if anyone is interested in getting one all ready to fly. Or if anyone is at the end of the ropes setting up this system, it is not super intuitive, you can send it to me and I will try my best to get it flying.

witespyquad with ys system . Follow me feature (6 min 15 sec)
Jun 19, 2012, 10:16 PM
Registered User
Thanks for posting. It's great to have you onboard with the YS controller as well. Do you think we'd be able to get this to fit on your FPV quad?

Quote:
Originally Posted by witespy
Thanks to V. I have been having some good luck with this system.

I have built up some ready to fly quads with them if anyone is interested in getting one all ready to fly. Or if anyone is at the end of the ropes setting up this system, it is not super intuitive, you can send it to me and I will try my best to get it flying.

http://www.youtube.com/watch?v=XTNxJpD8AtM
Jun 19, 2012, 10:30 PM
Registered User
fajar's Avatar
Quote:
Originally Posted by KariY
Thanks, looks like it helped. Still some TB but other direction. I'll try later again with this.
Redo your compass calibration, make sure you see the circles in the GCS after the calibration.. Should work well this time.
Jun 19, 2012, 10:38 PM
Registered User
Quote:
Originally Posted by jdreitman
Thanks for posting. It's great to have you onboard with the YS controller as well. Do you think we'd be able to get this to fit on your FPV quad?
Yes. if you want it on the fpv frame, this will be no problem for sure
Jun 19, 2012, 10:39 PM
12th Man
cryhavoc38's Avatar
Installed the latest firmware from V this afternoon and took my octo up.
no more speed limitation.
Last edited by cryhavoc38; Jun 21, 2012 at 01:32 AM.
Jun 19, 2012, 10:47 PM
Suspended Account
Quote:
Originally Posted by cryhavoc38
Installed the latest firmware from V this afternoon and took my octo up.
Maybe I have to recalibrate the sticks, but whats happening is that when I go full forward, the ship wants to forward and pitch left.
Pull back on the elevator and it will fly back and pitch to the right.

its not drifting left or right, but exhibiting definite tilt to the right when going back and tilt left when going forward. Only at full stick throws though.

This is in auto hover mode.

I downgraded to the previous firmware and the behavior isn't there.
put it back to the latest and the tilt at full stick push/pull comes back.

Interested to know if others update to the latest rev and see something similar.
Sorry if my suggestion sounds insulting, but did you check that you set the octo as X or + style after upgrade? Sounds like its behaving opposite style to your model.
Jun 19, 2012, 11:02 PM
12th Man
cryhavoc38's Avatar
Hi nic,
no worries on the suggestion.
its set for 5 which is octo x

but thanks for mentioning that.
maybe a refresh of all the manual settings would be in order.
I'll try that tomorrow just in case.
Jun 19, 2012, 11:13 PM
Suspended Account
Quote:
Originally Posted by cryhavoc38
Hi nic,
no worries on the suggestion.
its set for 5 which is octo x

but thanks for mentioning that.
maybe a refresh of all the manual settings would be in order.
I'll try that tomorrow just in case.
Cool mate, I'm in the process of going coaxial with my ADX-4, so familiarizing myself with different setups. I just dont want to insult anyone here since im more of the newbie in these advanced systems, and in the XA thread, anything I ever said was always questioned. This thread is much more polite and helpful. My Droidworx ADX-4 is flying Mode1, 2 and GPS assisted really well. The hover and position hold is something I'm not used to, its so stable and still. Got my Gemfan CF props from Multirotortech the other day, once those are balanced, I'll get some video for you all up (before I go X8 with it).
Jun 19, 2012, 11:33 PM
12th Man
cryhavoc38's Avatar
I do really like the way it feels when flying in manual with alt and atti hold, very smooth.
In GPS hover mode, with 7 or more sats, she really parks in the sky.

Its just some of the little firmware tweaks that need to be fleshed out that, when done, will make the YS a really great controller.

Its early in its life..there's only room for improvement in the code.
Jun 20, 2012, 02:59 AM
Registered User

GCS and Firmware explanation


I have been in contact with ZeroUAV and they said I can post it here. I have been told this:

"The firmware for Gothelirc is to release its altitude&speed limitation. At the beginning we sent the YS-X6 to U.S.&AU. with alttitude and speed limitation in case that their laws request the limitation.

Most customers need no alttitde and speed limitation except AU., so we did a firmware especially for those units.

But all YS-X6 after U.S & AU. are coming with no alttitude & speed limitation, and those who need the limitation can contact us to get a free firmware to limit it whenever needed."

The latest firmware and GCS for use by people outside of the USA and Australia is on my website http://multirotor.co.za/?page_id=671 and a list of Vendors is here http://multirotor.co.za/?page_id=954


Rob
Jun 20, 2012, 03:48 AM
Registered User
Quote:
Originally Posted by robone
I have been in contact with ZeroUAV and they said I can post it here. I have been told this:

"The firmware for Gothelirc is to release its altitude&speed limitation. At the beginning we sent the YS-X6 to U.S.&AU. with alttitude and speed limitation in case that their laws request the limitation.

Most customers need no alttitde and speed limitation except AU., so we did a firmware especially for those units.

But all YS-X6 after U.S & AU. are coming with no alttitude & speed limitation, and those who need the limitation can contact us to get a free firmware to limit it whenever needed."

The latest firmware and GCS for use by people outside of the USA and Australia is on my website http://multirotor.co.za/?page_id=671 and a list of Vendors is here http://multirotor.co.za/?page_id=954


Rob
All the kits that we sell to our customers come with the same feature set as the ones other dealers sell. I have just been informed by Zerouav that the kit they shipped for US customers did initially have certain restrictions. The kits that we have shipped so far doesnt have specific restrictions other than whatever is limited in the standard feature set of the kits. We have not heard anything from our customers in Australia experiencing the kind of restrictions that US customers are having. Thus there is no need for our customers to reflash the kit by using gothelirc's firmware.
Jun 20, 2012, 05:49 AM
Registered User
Quote:
Originally Posted by multirotortech
All the kits that we sell to our customers come with the same feature set as the ones other dealers sell. I have just been informed by Zerouav that the kit they shipped for US customers did initially have certain restrictions. The kits that we have shipped so far doesnt have specific restrictions other than whatever is limited in the standard feature set of the kits. We have not heard anything from our customers in Australia experiencing the kind of restrictions that US customers are having. Thus there is no need for our customers to reflash the kit by using gothelirc's firmware.
I think that ZeroUAV are only trying to comply with the specific Country laws and making sure the Vendor does not break any law.

By the way, what I quoted was an almost (English changed slightly) exact copy of what they told me and they agreed that I could post it.

Rob
Jun 20, 2012, 10:17 AM
12th Man
cryhavoc38's Avatar
hoping to see some improved gimbal control settings soon.
Looks like the Skyline gimbal controller is having some teething pains right now
Last edited by cryhavoc38; Jun 21, 2012 at 01:35 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion YS-X6 testing GotHeliRC Multirotor Drone Talk 1200 Aug 08, 2013 09:23 AM
New Product Test video of YS-X6 Autopilot system pzhang Multirotor Drone Talk 141 Jun 07, 2012 06:50 AM
Discussion New UAV System from Zero UAV alishanmao UAV - Unmanned Aerial Vehicles 2 Apr 19, 2012 09:02 AM
New Product YS-X6:A coming new king in the multi rotor heli world yiny0730 Multirotor Drone Talk 13 Mar 28, 2012 11:28 PM