Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by twinkle, who may elect to delete unwanted replies.
Old May 08, 2012, 07:24 PM
twinkle is offline
Find More Posts by twinkle
It can't rain all the time
twinkle's Avatar
Discussion

Flying scale foamie Porter PC6


The Semi scale PC6 is finished and has been test flown

The main differences are the undercarriage which has been simplified and the wing chord which has been stretched a little giving 2 square feet of wing area and 14 oz wing loading and currently there are no wing struts fitted .
Finished in Air America livery it looks the part and its test flight followed in July when the winds and rain went away
2812 power 8x4 prop and about 200 watts it is a nice sport flyer.
fitted with a 3s 1800 lipo and has space for a 4000 lipo as well to increase its flight time to a little to over 30 minutes.
at 40 "Span it makes a nice 1 piece model to carry in the back of the car although the wing is detachable and is secured with two 6mm nylon bolts.

only changes will be add differential ailerons and move the cg rearward slightly The battery will be moved into bay 2 below the wing there are 2 hatch under this model and the battery going into the middle compartment will cure this problem .The aileron differential is easy to cure by moving the arms and stretching the short push-rods .
Last edited by twinkle; Jul 06, 2012 at 04:21 AM. Reason: flown
Sign up now
to remove ads between posts
Old May 08, 2012, 09:38 PM
superb75 is offline
Find More Posts by superb75
Registered User
superb75's Avatar
Wow!

When did you start building this aircraft? Before or after "Foamcon"?

Would you be a kind of machine that builds airplanes?

LOL!

Is it a creation or your interpretation of a plan or kit? You made ​​it a very nice plane! Congratulations!

The other day you spoke to me of inspiration ... Voilà!

Jean
Old May 17, 2012, 07:43 AM
HFernandez is offline
Find More Posts by HFernandez
Registered User
Hi:

one of my "building dreams..".. I'm just with my first depron trainer (after more that 18 years out of the hobby), I will looking forward for more info about that plane..

good flights!!
Old Jul 05, 2012, 03:22 PM
twinkle is offline
Find More Posts by twinkle
It can't rain all the time
twinkle's Avatar

Flown


The PC6 had its test flight today only mod was to bring the cg back a bit flew well , but needs a bit of differential ailerons but put 3 batteries through it without a problem

nice and quick . I'm pleased with it

regards emma
Old Jul 05, 2012, 06:55 PM
superb75 is offline
Find More Posts by superb75
Registered User
superb75's Avatar
Congratulations, this is a nice plane!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 3CH PC6 Turbo Porter dhc8guru Foamies (Scratchbuilt) 0 Dec 14, 2011 02:30 PM
Discussion GRATIS Planos Pilatus Porter PC6 - Llévele, llévele. eromeros Mexico 9 Nov 20, 2011 10:55 AM
Airfoil for Pilatus PC6 Porter ???? dont The Builders Workshop 30 Aug 13, 2007 05:57 AM
Sold FS: Pilatus PC6 Porter Plan Rudderman98 Aircraft - Electric - Airplanes (FS/W) 2 Nov 12, 2003 11:47 AM