Thread Tools
Oct 31, 2003, 10:57 AM
Registered User
Question

Whats the cleanest way to mount a B20 to a Profile depron fuselage?


What is the cleanest way to mount a Hacker B20 15L onto a Profile Depron fuse?

Pictures and ideas would be appreciated.

Josh
Sign up now
to remove ads between posts
Oct 31, 2003, 12:15 PM
I'm goin' Falcon nuts
RCAV8R13's Avatar

Re: Whats the cleanest way to mount a B20 to a Profile depron fuselage?


Quote:
Originally posted by JoshFlies3d
What is the cleanest way to mount a Hacker B20 15L onto a Profile Depron fuse?

Pictures and ideas would be appreciated.

Josh
Hi Josh,
I don't know if it is the cleanest way but here is how I did it on my Vertigo Pro. I filed a flat notch in the carbon tube for the motor to sit on and just zip tied it there.
RCAV8R13
Oct 31, 2003, 12:26 PM
Registered User
That looks real clean to me


Thanks, That's how I will mount mine.


Josh
Oct 31, 2003, 02:37 PM
Registered User
STRINGFLY's Avatar

landing gear.


I do a lot of profiles.. and a nice shot of your landing gear install would be great also. Thanks.......
String
Oct 31, 2003, 03:08 PM
Real Men Fly Pink Planes...
kepople's Avatar
Thats CLEAN!

I used a GWS mounting stick which is drilled at one end and epoxied to the CF support rod. Then I use the Stevens aero mount for hackers, and the GWS box just likeds on. The reason is that I can switch between the 3 times as powerful Hacker and the Razor 400 in a GWS gear box.

Kirby
Oct 31, 2003, 08:00 PM
Cumulus Altimus
FASTBEN's Avatar
rca,you got pm
Oct 31, 2003, 08:15 PM
I'm goin' Falcon nuts
RCAV8R13's Avatar

Re: landing gear.


Quote:
Originally posted by STRINGFLY
I do a lot of profiles.. and a nice shot of your landing gear install would be great also. Thanks.......
String
String,
Here's a pic of the L.G. install on the Vertigo Pro. I made a small 1"x1"x1/4" lightply block glued into a cut out in the fuse. I then capped each side with 2"x2"x1/32 ply. I Dremeled out a small groove for the wire to sit in, drilled four holes and zip tied the grear on. It's light and strong and I can take it off if I want.
RCA
Oct 31, 2003, 09:41 PM
Registered User
Slick!

Im going with no gear on my Foam Edge im building right now, But maybe next one!

Josh
Nov 01, 2003, 06:57 AM
Registered User
STRINGFLY's Avatar

thanks....


THanks for the gear shot... I have tried a few methods but have not been very pleased with them... Will give that a try... Thanks again................STRINGFLY


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Whats the best way to mount pushrods inside of the boom?? RandyK1 Electric Sailplanes 20 May 28, 2006 03:26 PM
Whats the best way of forming foam? Aubrey Foamies (Kits) 0 Feb 28, 2002 12:19 AM
down thrust, right thrust, Whats the best way to do this? hawkeye_abm Beginner Training Area (Aircraft-Electric) 5 Feb 08, 2002 08:23 AM
Best way to mount an Endo/E3D motor? ScotY Sport Planes 19 Dec 06, 2001 05:22 PM
aggg, whats the best way to connect 2 computers?? TheSpruceMoose Life, The Universe, and Politics 23 Aug 01, 2001 12:06 AM