Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old May 06, 2012, 01:27 PM
elvill is offline
Find More Posts by elvill
Registered User
Cool

MQX Hybrid Nano Quad & Sick Micro Speed Boat Conversions!


I know, I know, dont need to hear how should be posted elsewhere... Notion is if this "wurks" a lot of people who roam indoor/micro/micro rtf would think this is pretty cool, - a nimble nano dsm2 as3x QUAD for less than 80 bucks. All parts arriving monday...

https://www.rcgroups.com/forums/show....php?t=1646089

could have just wasted money but idk well worth another slot on my DX7 if works

heres a good video review it it stock

The World's Smallest Quad Copter with 6 Axis gyros in production today. (7 min 50 sec)


really I'm not good enough to make quad from parts bought (hk or other) programmed together - Had to go route of arf or bnf just wanted something different and small

@40mm and 5grams can there a more obvious conversion than this, um that is 1.5 inches!!! will probably end up making custom frame eventually go full thin carbon fiber
8.5 geared to 7mmDD - Im okay with that, have had excellent luck with 7mm motors will last with good cool down, and many spares
Last edited by elvill; Jul 16, 2012 at 01:53 PM.
Sign up now
to remove ads between posts
Old May 07, 2012, 01:24 AM
elvill is offline
Find More Posts by elvill
Registered User

kicks and giggles


gonna try these 1st got all the props - will run 6mm till they don't anymore just to get everything operating correct - maybe make a lite foam 4" body - just to see how MQX does with different motors - like I said an as3x quad board for 36 bucks - worth playing with for sure surprised others haven't already... maybe Im missing something obvious
Old May 07, 2012, 03:03 AM
derk is offline
Find More Posts by derk
TheyreComingToTakeMeAway!
derk's Avatar
hmm, i wonder how much the esc's on that board can handle?
Old May 07, 2012, 03:09 AM
elvill is offline
Find More Posts by elvill
Registered User
me too surely not DD 8.5 - but 6mm or 7mm DD hope it'd be okay, probably not my 7mm hots but maybe red or orange...

in the end lets hope its as least as much as the tiny ladybird quad
Old May 07, 2012, 03:17 AM
elvill is offline
Find More Posts by elvill
Registered User
big part of the reason I'm doing this convert dsm2 - 7mmDD over 8.5geared

1) love the size weight savings
2) have burned through 5x more geared 8.5 then I have 7mm ttfanprop (this combo keeps going used again and again) (10x more 6mm motors)

working of a lite 6mm motor frame now - kfc lid might do the trick has degree on it to help orientate
Last edited by elvill; May 07, 2012 at 05:59 AM.
Old May 07, 2012, 06:40 AM
Azarr is offline
Find More Posts by Azarr
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Looking forward to your conversion. For some reason I though the receiver and board were one unit, interested to see how you will adapt it to the spektrum receiver. I've wanted one of these but didn't want to have to use their transmitter.

Azarr
Old May 07, 2012, 10:24 AM
elvill is offline
Find More Posts by elvill
Registered User
Quote:
Originally Posted by Azarr View Post
Looking forward to your conversion. For some reason I though the receiver and board were one unit, interested to see how you will adapt it to the spektrum receiver. I've wanted one of these but didn't want to have to use their transmitter.

Azarr
Hi Azarr,

heres what I was thinking... just switch out RXs to different frame.

1) bought all ladybird rc parts besides rx - no tx either - 7mmDD & all frame bits
2) bought only MQX as3x full quad unit by itself - separate unit 1.5" 5 grams

figure put awesome MQX RX on awesome ladybird frame/motors/setup - BAM!

best of both worlds - DSM2 & 7mm DD hopefullt very quick and responsive - like 7DD better than 8.5 geared
Old May 08, 2012, 12:02 PM
elvill is offline
Find More Posts by elvill
Registered User

looks great!


here is the brick er, uh... RX board esc gyro and all in 1. Super lite - ladybird parts arriving from wow hobbies tomorrow.
Old May 09, 2012, 09:58 AM
minimadlex is offline
Find More Posts by minimadlex
Registered User
minimadlex's Avatar
Hey Elvill,
Took the plunge and ordered one of the infra red quads from goodluckbuy, hopefully be here next week,.

I did just find this thread though, looks pretty promising! Am likin his carbon frame for it!

https://www.rcgroups.com/forums/show....php?t=1602578

Lex
Old May 09, 2012, 08:31 PM
elvill is offline
Find More Posts by elvill
Registered User
Quote:
Originally Posted by minimadlex View Post
Hey Elvill,
Took the plunge and ordered one of the infra red quads from goodluckbuy, hopefully be here next week,.

I did just find this thread though, looks pretty promising! Am likin his carbon frame for it!

https://www.rcgroups.com/forums/show....php?t=1602578

Lex
worried about the draw of this models motors so I think I'll keep it stock for a bit (minus frame of coarse) mine has not arrived...

rx and motors work perfect just waiting on booms, shoulda been here today but stuck in portland a day longer...

so many interesting projects got going right now...
Old May 09, 2012, 10:16 PM
nemoskull is offline
Find More Posts by nemoskull
Pilot, Co-pilot, Navagator
nemoskull's Avatar
all this talk is making me get the itch to build the Don's Iron Vulture
Old May 10, 2012, 11:04 AM
elvill is offline
Find More Posts by elvill
Registered User
Quote:
Originally Posted by nemoskull View Post
all this talk is making me get the itch to build the Don's Iron Vulture
had to google - maybe it could be done but you'd need at least 3 rx
Old May 10, 2012, 07:25 PM
elvill is offline
Find More Posts by elvill
Registered User

look what just arrived!!!!


dont see how this aint gonna work ladybird plastic frame is twice as small but both are lite MQX rx maybe 2 1/2 grams heavier than ladybird - but Ladybird arms plug perfect into MQX frame - nice
Old May 10, 2012, 07:46 PM
derk is offline
Find More Posts by derk
TheyreComingToTakeMeAway!
derk's Avatar
That's cool, don't forget to add some leds for flying in the dark
Old May 10, 2012, 07:50 PM
elvill is offline
Find More Posts by elvill
Registered User
took longer to upload picture than it did to setup! gotta cut mini plugs off and solder mini on then find a battery, bind and test drive... plug is forward direction - this my 1st quad hope I dont destroy it - if it even works at all


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Horizon Hobby Blade mQX Micro Quad-Copter with AS3X RTF & BNF Review Michael Heer Multirotor Talk 32 Jan 30, 2016 07:51 PM
Discussion Walkera Ladybird vs Blade MQx Thetis Multirotor Talk 13 Jun 19, 2012 10:37 PM
New Product Blade mQX Quad. ridgewalker Micro Helis 3 Feb 10, 2012 09:13 AM