3dhs 41" Edge 540 Orange LPU Greensboro, NC - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by dataylor57, who may elect to delete unwanted replies.
May 06, 2012, 01:24 PM
Trader Rating: 3
♫ Learning to fly ♫
dataylor57's Avatar
Sold

3dhs 41" Edge 540 Orange LPU Greensboro, NC


Selling a 3dhs 41” Edge, this is a replacement air frame with about a dozen flights on it. The plane is in excellent condition with one exception. The landing gear caught in the grass and bent back causing the fairing to put a small hole in the sheeting (see pic). The picture looks worse than the actual damage due to being blown up so large. The motor and esc were purchased new for my original Edge last year. I crashed it and they were out of stock so I bought a 47” SHP and have been flying that. I bought this plane last fall when they came back in stock but just got around to building it about a month ago. I’ve found that I just don’t fly it that much, prefer the SHP, and in fact have decided to try to clear some space for a 57” Extra.


Includes the following (total cost about $240 not including any shipping):
- 3d Hobby Shop 41” Edge 540 – 109.99
- 72g Omega Motor – 39.99
- Mystery 40a esc with sbec (has PP connector for the battery) – 19.50
- 4x Hitec hs45-hb servos (purchased new for this plane so only about a dozen flights on them) – 60.00
- Extreme Flight 40mm black spinner, servo extensions and APC 12x6 Prop

Asking $200 receiver ready or can include a Spektrum AR6110 for an additional $30. Local pickup in Greensboro, NC or within a 1 hour drive of Greensboro. PM with any questions…Thanks.
Sign up now
to remove ads between posts
May 06, 2012, 05:13 PM
Trader Rating: 47
There is Victory in the Lord!
knifeedge63's Avatar
interested in trades?
May 06, 2012, 06:06 PM
Trader Rating: 70
Registered User
I might be interested, but I'll have to think about it. I am in the middle of putting together a new 3DHS 47" Osiris right now. By the way I will be moving to Greensboro at the end of next year, as that is were most of my family lives, so where is the closes place to fly between Adams Farm and Kernersville?
May 06, 2012, 06:54 PM
Trader Rating: 3
♫ Learning to fly ♫
dataylor57's Avatar
Quote:
Originally Posted by knifeedge63
interested in trades?
Thanks but my main goal right now is trying to get together some funds for a 57" Extra.
May 06, 2012, 07:01 PM
Trader Rating: 3
♫ Learning to fly ♫
dataylor57's Avatar
Quote:
Originally Posted by mustangherb
I might be interested, but I'll have to think about it. I am in the middle of putting together a new 3DHS 47" Osiris right now. By the way I will be moving to Greensboro at the end of next year, as that is were most of my family lives, so where is the closes place to fly between Adams Farm and Kernersville?
I do most of my flying at a school field near downtown Greensboro or the local club field north of town near Browns Summit. Don't get down near the Adams Farm area much but I would think there would be some places around there. Good luck with the Osiris, those are nice planes.
May 12, 2012, 03:29 PM
Trader Rating: 3
♫ Learning to fly ♫
dataylor57's Avatar
Anyone in the Archdale, NC area that's interested can see this plane at KC Hobby...thanks


Ooops never mind...it just sold
Last edited by dataylor57; May 12, 2012 at 03:38 PM. Reason: Sold

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Sold. NIB 3DHS 41" Edge 540 Sold. jbj620 Aircraft - Electric - Airplanes (FS/W) 6 May 04, 2012 11:10 AM
Poll 3DHS 41" Edge 540 or P.A. 48" Extra 260 Diesel6401 3D Flying 5 Mar 22, 2012 06:46 PM
Sold LPU Only - BNF 41" 3DHS Edge 540 flyracer Aircraft - Electric - Airplanes (FS/W) 8 Mar 12, 2012 02:55 PM
Wanted 3DHS Buck Huck in Orange (41" Edge 540) jimklein Aircraft - Electric - Airplanes (FS/W) 0 Nov 20, 2011 11:13 PM
For Sale 3DHS 41" Edge 540 RX ready $220 LPU preferred gonzoman5 Aircraft - Electric - Airplanes (FS/W) 2 Oct 10, 2011 05:33 PM