Thread Tools
Jun 25, 2012, 09:17 AM
kero burner
jdlilfan's Avatar
subbed. will prolly pull the trigger. My fw190 flies pretty good
Sign up now
to remove ads between posts
Jun 25, 2012, 03:43 PM
jbc
jbc
WHO's your DADDY!!!
jbc's Avatar
I know not many flight reports back on this plane yet but it seems so far that the problems that accompanied the the Parkzone (hard 'ish' to fly) might not be there
Jun 26, 2012, 12:35 PM
Registered User
TripleW's Avatar
Nitro just emailed me with the 109 on sale!
http://www.nitroplanes.com/60a-dy8951-bf109-arf.html
You guys Probably already know.
Jun 26, 2012, 01:25 PM
3 Blades is Better Than 2!
kman24's Avatar
Yep, you can now get 11% off any plane over $100 including this one with coupon code NitroplanesHobbypartz

Kman
Jun 27, 2012, 01:26 PM
2 many planes & 2 little time
scootrb4's Avatar
The discount did it for me I ordered it this AM!
I already fly the PZ 109 upgraded to 4s but I can't stand the gear hanging down.
I love the looks .... this will be my first Dynam warbird. I have 5 PZs and 2 Airfields to compare to.
Jun 27, 2012, 01:38 PM
Johnny Rabuse
JohnnyCrash.NYC's Avatar

Tip


Quote:
Originally Posted by scootrb4
The discount did it for me I ordered it this AM!
I already fly the PZ 109 upgraded to 4s but I can't stand the gear hanging down.
I love the looks .... this will be my first Dynam warbird. I have 5 PZs and 2 Airfields to compare to.
Worse part about Dynam is the easy connectors ...make sure you locktite them on mine I change out the elevator rods and put Clevises

Oh yeah the pilots are generally horrible but I think in this bird he might be ok

I,m ordering mine next week ...lemme know how it goes when you get yours ...thanks
Jun 27, 2012, 05:05 PM
2 many planes & 2 little time
scootrb4's Avatar
Quote:
Originally Posted by JohnnyCrash.NYC
Worse part about Dynam is the easy connectors ...make sure you locktite them on mine I change out the elevator rods and put Clevises

Oh yeah the pilots are generally horrible but I think in this bird he might be ok

I,m ordering mine next week ...lemme know how it goes when you get yours ...thanks
Thanks for the tip. I hot glue all my connectors.
OH NO! UPS says next day delivery from Nitroplanes.... I could be in very big trouble here
Last edited by scootrb4; Jun 27, 2012 at 07:36 PM.
Jun 27, 2012, 08:14 PM
Registered User
Just put my order in with the 11% discount

Does it come with the motor, esc, servo's etc for $129.00 ?

Also, how much is needed for assembley, just add receiver and lipo? Or is it a true ARF, and takes 4-6 hours ?

Any updates on how it flies?
Last edited by fltekdiver; Jun 27, 2012 at 08:24 PM.
Jun 27, 2012, 08:23 PM
kero burner
jdlilfan's Avatar
Quote:
Originally Posted by fltekdiver
Does it come with the motor, esc, servo's etc for $129.00 ?
Yes! Everything installed. You will just have to double check to make sure nothing was installed wrong or loose.

Quote:
Originally Posted by fltekdiver
Also, how much is needed for assembley, just add receiver and lipo? Or is it a true ARF, and takes 4-6 hours ?
Probably 1-2 hours if that. My FW-190 took about 1.5 hours. I'm assuming this will be the same. A few parts required glue, the rest bolted together. The accessories glue on and then the decals are applied. The decals can be a little difficult to apply, just work slowly and methodically, do not rush! I then spent about 35 minutes or so programming expo, rates, breaking in the esc/motor, testing the electronics.
Jun 27, 2012, 08:30 PM
Registered User
Perfect, music to my ears

How do you like it?

I've read about the landing gear not having enough rake, but I'm not worried, I'm sure I can land it fine

Also you running the 4S 2200 mah lipo? Whats the flight time?
Jun 27, 2012, 08:37 PM
Registered User
Last edited by fltekdiver; Jun 27, 2012 at 08:52 PM.
Jun 27, 2012, 08:54 PM
2 many planes & 2 little time
scootrb4's Avatar
oops, Thanks
Last edited by scootrb4; Jun 27, 2012 at 09:08 PM.
Jun 27, 2012, 08:57 PM
Registered User
coupon code NitroplanesHobbypartz
Jun 27, 2012, 09:06 PM
2 many planes & 2 little time
scootrb4's Avatar
Quote:
Originally Posted by jdlilfan
Yes! Everything installed. You will just have to double check to make sure nothing was installed wrong or loose.



Probably 1-2 hours if that. My FW-190 took about 1.5 hours. I'm assuming this will be the same. A few parts required glue, the rest bolted together. The accessories glue on and then the decals are applied. The decals can be a little difficult to apply, just work slowly and methodically, do not rush! I then spent about 35 minutes or so programming expo, rates, breaking in the esc/motor, testing the electronics.

Can somebody tell me, What is the proper way to break in a motor?
Thank you in advance
Jun 28, 2012, 08:21 AM
Clean up! The missus is home
huntingfield's Avatar
[QUOTE=scootrb4;22016009]Can somebody tell me, What is the proper way to break in a motor?
Thank you in advance[/Q

I call it flying


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Dynam BF-109 AL1EN Electric Warbirds 68 Jun 23, 2019 02:10 PM
Sold Messerschmitt Bf 109 Instrument Panel fits ESM 109 iflytailies Aircraft - General - Miscellaneous (FS/W) 0 Apr 28, 2012 11:05 PM
Sold New in Box ParkZone BF-109 With upgrades solarr Aircraft - Electric - Airplanes (FS/W) 3 Apr 21, 2012 02:13 PM
Sold Messerschmitt Bf 109 Instrument Panel ESM 109 iflytailies Aircraft - General - Miscellaneous (FS/W) 0 Mar 18, 2012 10:53 PM
Sold Brand New Parkzone messerschmidt bf-109 jwal9294 Aircraft - Electric - Airplanes (FS/W) 7 Sep 16, 2011 06:05 PM