Shop our Airplanes Products Drone Products Sales
Thread Tools
May 01, 2012, 11:42 PM
timnilson's Avatar
Quote:
Originally Posted by timecop View Post
That's how much Quad_Addict was selling his milled aluminum/acrylic frames for and I don't see much more material used here?
The kit is actually made up of 2 separate and isolated parts that are then connected via vibration bobbins. So you have a "dirty" and "clean" structure. The dirty part has the arms/motors/props and the "clean" part has all the cameras, FC, and other electronics. So we're not just cleaning up the video picture, but the FC performance as well. So it's 4 aluminum arms and 4 large machined G10 parts.
Sign up now
to remove ads between posts
May 01, 2012, 11:44 PM
Registered User
Svede's Avatar
Quote:
Originally Posted by timecop View Post
That's how much Quad_Addict was selling his milled aluminum/acrylic frames for and I don't see much more material used here?
1080p jello free vid= priceless
May 01, 2012, 11:47 PM
Always Excel >>>
BenHayat's Avatar
Quote:
Originally Posted by timnilson View Post
The kit is actually made up of 2 separate and isolated parts that are then connected via vibration bobbins. So you have a "dirty" and "clean" structure. The dirty part has the arms/motors/props and the "clean" part has all the cameras, FC, and other electronics. So we're not just cleaning up the video picture, but the FC performance as well. So it's 4 aluminum arms and 4 large machined G10 parts.
I was just looking at that section:
Last edited by BenHayat; Jan 10, 2014 at 06:41 AM.
May 01, 2012, 11:50 PM
timnilson's Avatar
Quote:
Originally Posted by Svede View Post
1080p jello free vid= priceless
Svede -- here is some 1080p footage recorded during the maiden flight in very windy conditions and old APC props... ok, enough excuses

QAV500 1080p Test Clip (0 min 54 sec)


I hope this shows that while the quad is being knocked around in the wind and the FC needs a bit more tuning, the video is clean.
Last edited by timnilson; May 01, 2012 at 11:56 PM.
May 01, 2012, 11:53 PM
Registered User
Jeffem62's Avatar
This is a tuf crowd to introduce a new multi rotor to. I congratulate you on the design. I hope it works out for you. Get some pricing posted and more videos, lets see what it can do.
May 02, 2012, 12:01 AM
Registered User
Machined aluminum arm looks professional, its expensive but I like it . What is the weight of empty frame please?





Quote:
Originally Posted by Jeffem62 View Post
This is a tuf crowd to introduce a new multi rotor to. I congratulate you on the design. I hope it works out for you. Get some pricing posted and more videos, lets see what it can do.
May 02, 2012, 12:05 AM
Registered User
Svede's Avatar
Hmmmm, it's taking a bit to upgrade to 1080. But, toss it around like this guy only in 1080. Aggressive maneuvering is where the real test is at, although using APC's is a pretty good test as well . Good video in hover unfortunately doesn't necessarily translate to good video the rest of the time.

FPV - drift (3 min 55 sec)
May 02, 2012, 12:09 AM
Always Excel >>>
BenHayat's Avatar
Quote:
Originally Posted by Svede View Post
Hmmmm, it's taking a bit to upgrade to 1080. But, toss it around like this guy only in 1080. Aggressive maneuvering is where the real test is at, although using APC's is a pretty good test as well . Good video in hover unfortunately doesn't necessarily translate to good video the rest of the time.
Wow, he is a good pilot!
May 02, 2012, 12:13 AM
timnilson's Avatar
Quote:
Originally Posted by BenHayat View Post
Wow, he is a good pilot!
Yes, he's very good! That's Juz70. He uses one of my other products (LayerLens).
May 02, 2012, 12:19 AM
Always Excel >>>
BenHayat's Avatar
Quote:
Originally Posted by timnilson View Post
Yes, he's very good! That's Juz70. He uses one of my other products (LayerLens).
Ah, is that crazy Jason? I love his flying style!
May 02, 2012, 12:21 AM
Suspended Account
Quote:
Originally Posted by timnilson View Post
Svede -- here is some 1080p footage recorded during the maiden flight in very windy conditions and old APC props... ok, enough excuses

http://www.youtube.com/watch?v=S12DhoF-7pU

I hope this shows that while the quad is being knocked around in the wind and the FC needs a bit more tuning, the video is clean.
Looks like standard Naza flying, wobblecity.
Nothing to do with the frame I'm sure.
May 02, 2012, 12:21 AM
timnilson's Avatar
Quote:
Originally Posted by tru168 View Post
Machined aluminum arm looks professional, its expensive but I like it . What is the weight of empty frame please?
It comes in at about 450g -- so a bit heavier than the HT FPV quad, but again, you fly it with bigger motors and bigger props. Can you fly the HT FPV quad with 10" props without seeing them in the GoPro picture?
May 02, 2012, 12:21 AM
Always Excel >>>
BenHayat's Avatar
Quote:
Originally Posted by timnilson View Post
Yes, he's very good! That's Juz70. He uses one of my other products (LayerLens).
BTW, this is what I just wrote to a friend about this frame:

Quote:
But what I love he has done, is to create a layer between the arm attachment and where the electronics go and put some shock observant in there, like a car, that you're not directly connected to chassis. Very smart. And looks very solid.
May 02, 2012, 12:23 AM
timnilson's Avatar
Quote:
Originally Posted by timecop View Post
Looks like standard Naza flying, wobblecity.
Nothing to do with the frame I'm sure.
Yes, the naza has been a bit more wobbly than I expected. I dialed the gains up/down, but have yet to find the perfect number. Again, every time I flew it outside, it was super windy. The sidewalk clip was the only moment when the wind was not that strong... there will be lots of videos soon...
May 02, 2012, 12:29 AM
Always Excel >>>
BenHayat's Avatar
Quote:
Originally Posted by timnilson View Post
Yes, the naza has been a bit more wobbly than I expected. I dialed the gains up/down, but have yet to find the perfect number. Again, every time I flew it outside, it was super windy. The sidewalk clip was the only moment when the wind was not that strong... there will be lots of videos soon...
Tim, have you tried it with HF Sport & Pro?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product GOPRO FPV Spider Quadcopter V4.0 + Anti Virbation Mount (NEW Pics Updated 15Apr2012) DiVidesign Multirotor Drone Talk 98 Nov 05, 2013 05:12 AM
New Product New from fpvmanuals: Lipo Strap made by Scorpion timnilson Multirotor Drone Talk 9 Apr 26, 2012 11:41 PM
Wanted FPVmanuals tricopter lower main frame flohio117 Aircraft - Electric - Multirotor (FS/W) 2 Apr 02, 2012 10:35 PM
Discussion New GoPro lens protection product by fpvmanuals timnilson Aerial Photography 0 Dec 15, 2011 10:34 PM
Sold HobbyKing Quadcopter Frame V1 - NEW - $22.50 shipped Merkin77 Aircraft - Electric - Multirotor (FS/W) 3 Sep 30, 2011 12:55 AM