E-Flight F-4 Phantom Build/Fly Thread - Page 48 - RC Groups
Thread Tools
May 18, 2012, 02:41 PM
stvinvegas's Avatar
Quote:
Originally Posted by 420flyboy
Same place
Quote:
Originally Posted by whmc
I measured at LE, per David Payne. whmc
Awesome... thanks Boys!!!
Sign up now
to remove ads between posts
May 18, 2012, 04:19 PM
Registered User
Tamjets's Avatar
Quote:
Originally Posted by vasek
Looks like a close call in anycase I'm going for MGs just to make sure
That could be over flare when is too nose heavy.
With correct C.G 6 3/8" and 5/32"- 3/16" up elevator mix with full flap on landing.
Is so easy to land and not much flare needed.
If follow the C.G in the manual. You guys will had hard time landing. It so nose heavy and you had to hold too much elevator. As soon you touch the main. It slap down the nose and that start to bounce. You in for a ride.


BTW,
Friend of my just call me.
He found 2 kits sit on the shelf from the Hobby Shop somewhere he goes for vacation.
He bought them both and one goes to me.
So far I get kits not from my order. But from friends and groups.
Last edited by Tamjets; May 18, 2012 at 04:30 PM.
May 18, 2012, 05:09 PM
Registered User
capt soap's Avatar
Tam, You must be a Navy Pilot,,, slamming it on the deck.
May 18, 2012, 05:11 PM
Registered User
Tamjets's Avatar
Quote:
Originally Posted by capt soap
Tam, You must be a Navy Pilot,,, slamming it on the deck.
Never join the Navy....but love green bottles.
So the day without drinking my green bottles.
That the day I do bad landing.
I fly better when hanging loose.
May 18, 2012, 05:59 PM
I tell her RC is cheap !
carguy1994ca's Avatar
Lol !
May 18, 2012, 07:37 PM
Registered User
hypstar's Avatar
Quote:
Originally Posted by vasek
The less "nerdy" version would be this
yepp..you`r right,I have them in black, but they looks better on the wingtips.
those cf is nice,but they are not here...for easy fix,better with small glassfibertape strips on the stabtips, for protection on the maiden and first flights...
May 18, 2012, 07:52 PM
Registered User
Tamjets's Avatar
Now I got my F-4 P-20 turbine all dial in.
I think started on the other fuse with TJ80.
May 18, 2012, 10:04 PM
Registered User
Quick question on the fanjet80 setup. Going to be running an Arc/jf80/CC Phoenix HV 120 6c esc. I bought a CC 10 amp bec because there is no bec built into the esc. Is this the correct setup?
May 18, 2012, 10:18 PM
Mile High EDF
420flyboy's Avatar
Quote:
Originally Posted by Qcsteve
Quick question on the fanjet80 setup. Going to be running an Arc/jf80/CC Phoenix HV 120 6c esc. I bought a CC 10 amp bec because there is no bec built into the esc. Is this the correct setup?
That will work,
I have jetfan80 with arc and castle 100 , I disable the bec and use a 1100 mah life 2s, plugs direct into reciever .
May 18, 2012, 11:10 PM
Registered User
smaze17's Avatar
Tam, what size are the little Du-Bro wheels for the nose?

S
May 19, 2012, 12:34 AM
Registered User
Tamjets's Avatar
Quote:
Originally Posted by smaze17
Tam, what size are the little Du-Bro wheels for the nose?

S
Those are Hangar 9 Lite wheel 1.5".
The main wheel you need 2" Lite Du-Bro.
May 19, 2012, 12:49 AM
Sponsored by Team de la Peņa
bdelapen's Avatar
Quote:
Originally Posted by Qcsteve
Quick question on the fanjet80 setup. Going to be running an Arc/jf80/CC Phoenix HV 120 6c esc. I bought a CC 10 amp bec because there is no bec built into the esc. Is this the correct setup?
The CC 10A BEC is good to 6 cells, if you plan to run more you will need to get the 20A BEC Pro. Or you could most probably just run a LiFe pack as a receiver pack and do away with the BEC altogether.

- Birger
May 19, 2012, 12:50 AM
SoCal, Year Round Flying!
bmiller's Avatar
Decided to replace my weak moving weird sounding front retract before I remaiden her tomorrow. So I bought another set of eflite 15-25s, huge difference, glad I did it.
Worked on CG using 7S 5000s, was able to get as far back as 6.5 inches!

Anybody know what the default setting is on CCproBECs? Can I just plug it in and forget about it or do I really need to program it with the CC link?
May 19, 2012, 12:59 AM
Registered User
Tamjets's Avatar
Quote:
Originally Posted by bmiller
Decided to replace my weak moving weird sounding front retract before I remaiden her tomorrow. So I bought another set of eflite 15-25s, huge difference, glad I did it.
Worked on CG using 7S 5000s, was able to get as far back as 6.5 inches!

Anybody know what the default setting is on CCproBECs? Can I just plug it in and forget about it or do I really need to program it with the CC link?
5.5v i think
May 19, 2012, 01:33 AM
SoCal, Year Round Flying!
bmiller's Avatar
Good enough for me Tam. Thanks!
The "included" 2 wire jumper was not included!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Fly-Fly F-4 Phantom: BUILD CRCJA Foamy EDFs 2266 Oct 29, 2017 12:57 PM
Sold Master Fly F-4 Phantom II 1/7 scale 99"lenth 65"w dhf23 Aircraft - Electric - Jets (FS/W) 9 Dec 29, 2011 10:43 PM
Alert E-Flite F-4 Phantom 32 DF ChuckTseeker Electric Plane Talk 17 Sep 09, 2011 01:54 AM
Discussion Starmax F-4 Phantom 90mm Build Thread OneHundretMoons Foamy EDFs 31 Jan 12, 2011 04:56 AM
Anyone build/fly AERC F-4 Phantom War Bird Radio Parkflyers 3 May 11, 2003 07:19 PM