Shop our Airplanes Products Drone Products Sales
Thread Tools
May 30, 2012, 07:15 PM
Registered User
Pseudonym's Avatar
That looks a lot better. It's 1/4" tubing I take it?
Sign up now
to remove ads between posts
May 30, 2012, 07:46 PM
Redneck Injuneer
bill34207's Avatar
Yep it's 1/4" with a 7/32" sleeve on the motor end so it's a good fit around the .187 flex.

I won't get much done this weekend since we're doing inventory where I work and I have to work both days.
Last edited by bill34207; Jun 01, 2012 at 07:40 PM. Reason: more photos
May 30, 2012, 08:07 PM
I feel the need for speed!
scorpion1's Avatar
Looks alot better!!
Jun 03, 2012, 10:27 AM
Redneck Injuneer
bill34207's Avatar
I was one tired old dog after getting in last night but on the good side didn't have to work today. Inventory got finished last night. Since I was expecting to have to work today had nothing planned on my calendar. So...
Managed to get the esc's in already this morning and most of the plumbing ran. Still have to do the exits after deciding where to put them. Threw a couple of 5s 5000's in the sponsons and it balances about 9.75" from the rear of the sponson transoms with the hatch on. (about 31%).
Jun 03, 2012, 10:51 AM
Registered User
osprey21's Avatar
Nice clean setup, looks great!
Jun 03, 2012, 01:53 PM
Lets get the HUEY up
madphil's Avatar
Bill looking good now , if you use velcro for mounting your speed controllers you can move them to adjust your C of G without adding more weight

won't be long now before its getting wet ???????
Jun 03, 2012, 05:15 PM
Redneck Injuneer
bill34207's Avatar
Should be ready for sea trials at our next test n tune day. (next Sunday).
It's pretty much finished now except for packing the stuffing tubes with grease. I test floated it in the tub a little while ago and after a couple of minutes it did get a tiny little bit of a drip where the flexes come out of the tubes on the motor end.

Edit: just put it on the scales.Hull, hatch and hardware (rtr minus batts) comes in at 7 lbs 10 oz. or about 3.5 kg.
Last edited by bill34207; Jun 03, 2012 at 05:40 PM.
Jun 04, 2012, 05:32 PM
Registered User
hebner's Avatar
Looking good Bill.
Jun 05, 2012, 04:54 PM
Fast boats
Vn_304's Avatar
Very nice work looks great
Jun 09, 2012, 10:35 PM
Scottskis' Laminates
Tiqueman's Avatar
Looks great Bill. Ive been slacking on the forums due to work overload. Cant wait to see the vids you will take tomorrow. Wish I could make it, but cant complain about the work thats been ruling my life for the moment. I hope to have my twinny done for 4th Sunday.... or at least real close. Kept my scheme simple
Jun 10, 2012, 03:21 AM
Registered User
osprey21's Avatar
Jun 10, 2012, 05:10 AM
Redneck Injuneer
bill34207's Avatar
That's a nice set of custom decals on your's Scott. Looks great. :thumbup:
Jun 10, 2012, 01:43 PM
Redneck Injuneer
bill34207's Avatar
1st run on my Cheetah was really disappointing. Looks like it belongs on a farm with the way it was plowing. I was surprised the GPS said it was that fast as wet as it was running.

06-10-12 Cheetah 1.wmv (0 min 58 sec)
Last edited by bill34207; Jun 10, 2012 at 03:42 PM. Reason: added photos
Jun 10, 2012, 01:58 PM
Redneck Injuneer
bill34207's Avatar
Here's the 2nd attempt after raising the stingers to the limit of their adjustment and adding 1.5 oz. of lead to the rear of the boat.

06-10-12 Cheetah 2.wmv (1 min 4 sec)

Still no love.
Jun 10, 2012, 02:05 PM
Lets get the HUEY up
madphil's Avatar
Bill whats the weight of the boat including batterys ?,

please can you post a overhead "plan" photo of the boat showing both props and rudder position , if you could also post a side on shot showing hull running line ,stinger angles and rudder position

this would be a great help


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Cheetah - Drambuie On Ice RayR Racing Boats - Electric 91 Dec 21, 2015 05:33 PM
Sold Seagate Cheetah 15K.5 300 GB,Internal (ST3300655SS) Hard Drive wrathofkhan Non R/C Items (FS/W) 3 Mar 29, 2012 12:31 AM
New Product Cheetah 70c 7000mah lipo bob2005 Product Announcements 0 Mar 25, 2012 03:55 PM
Wanted Cheetah or Super Cheetah mustang mark Aircraft - Sailplanes (FS/W) 5 Jan 31, 2010 02:42 AM
For Sale NIB Super Cheetah Kit by Cheetah Models surfimp Aircraft - Sailplanes (FS/W) 11 Jun 04, 2004 09:29 PM