New Products Flash Sale
Thread Tools
Old Nov 07, 2012, 08:44 AM
pabloreg is offline
Find More Posts by pabloreg
Registered User
Quote:
Originally Posted by RedSky View Post
Hi Pablo, the PJ760 works but the camera does not stabilise in roll so in some ways the result is a bit disappointing, although the pitch stabilisation is excellent and the pan stablisation of the camera does a good job in smoothing out directional movement of the airframe. Also, there is more vibration with my set up (14 inch props) with the PJ760 than with the NEX-5N, probably to do with the camera being mounted by the tripod screw rather than the lens mount clamp on the NEX-5N.

Overall, I've not followed up any more with the experiment as the PJ760 was expensive and would be pretty fragile in a crash or even heavy landing compared with the NEX-5N which is super tough.
Thanks, that information is very valuable, so i can concentrate to others problems. I'm looking to use the PJ760 mostly because the use of Zoom. Some people are using the zoom while fly, that was a great funcion to AP and AV.

I will look to other solution frame and gimbal to use with PJ760.
Sign up now
to remove ads between posts
Old Nov 07, 2012, 08:48 AM
nycewheels is offline
Find More Posts by nycewheels
Bert'sEyeViews of NYC
nycewheels's Avatar
Quote:
Originally Posted by kevinlib View Post
cheapest hdmi cable, still waitting for the oversea shipping.
http://www.ebay.com/itm/180904056930...84.m1439.l2649
Thanks for that link. I have never seen one with the angled plug, gives the swinging camera the needed clearance.
Old Nov 07, 2012, 09:04 AM
AliB is online now
Find More Posts by AliB
kitesurfer
just got some new gyros.

Old style hk401b with glue mod... totally changed my rig. SO SO much better than the new hk401b.
easy to setup and works great. winner.
Also tried an E-tech G105 which also works well.

Both work better than new 401b
Old Nov 07, 2012, 09:07 AM
stanleyy is offline
Find More Posts by stanleyy
Registered User
Quote:
Originally Posted by AliB View Post
just got some new gyros.

Old style hk401b with glue mod... totally changed my rig. SO SO much better than the new hk401b.
easy to setup and works great. winner.
Also tried an E-tech G105 which also works well.

Both work better than new 401b
great.. so now we have to visit junkyard and look for old gyros
Old Nov 07, 2012, 11:33 AM
TAP993 is offline
Find More Posts by TAP993
Registered User
TAP993's Avatar
Quote:
Originally Posted by AliB View Post
just got some new gyros.

Old style hk401b with glue mod... totally changed my rig. SO SO much better than the new hk401b.
easy to setup and works great. winner.
Also tried an E-tech G105 which also works well.

Both work better than new 401b
OK, so much for the 401b purchases then. Anyone got a few old ones to sell? I found just 1 E-tech G105 on ebay uk and have snapped that up just in case...
Old Nov 07, 2012, 02:14 PM
stanleyy is offline
Find More Posts by stanleyy
Registered User
hm, I just opened all my four 401 gyros and guess what.. all have the new design...
Weird thing is that I got quite nice results with these gyros.
So does it really make that big difference??
Old Nov 07, 2012, 03:24 PM
LiutaS is offline
Find More Posts by LiutaS
Registered User
LiutaS's Avatar
I wander, is it only 401b will be good for this gimbal? As i have GA410 assan sitting at home for long time, would this be good at all?
Old Nov 07, 2012, 06:19 PM
InfinitR is offline
Find More Posts by InfinitR
Registered User
Try it. I am waiting for some 401b gyros as well so we'll see.
Old Nov 07, 2012, 06:21 PM
InfinitR is offline
Find More Posts by InfinitR
Registered User
Progress...

Old Nov 07, 2012, 07:09 PM
AliB is online now
Find More Posts by AliB
kitesurfer
just a note, i would put the LED boom on one the motor booms like shown on the ecilop site. allows the gimbal more travel.
Old Nov 07, 2012, 08:25 PM
InfinitR is offline
Find More Posts by InfinitR
Registered User
Thanks, I'll take a look.

In an effort to relocate my HDMI converter, I realized that at a cost of 20 grams you can use the alternate camera mount as a backpack. I just had to add a spacer on the tripod mount screw.

Last edited by InfinitR; Nov 08, 2012 at 03:08 AM.
Old Nov 08, 2012, 10:43 AM
TAP993 is offline
Find More Posts by TAP993
Registered User
TAP993's Avatar
I decided to try stronger & weaker springs to see what happens (currently running pre-update Ecilop with standard springs). Result with my setup (new HK401b + MG930) was that the stronger springs (i put cable ties around last 3 rings of spring to tighten them up) made oscillation and horizon wobble worse. I then tried weakend springs and definitely got a better result, in fact almost useable footage...will have to order some proper ones. I think the weaker springs allow you to run a slightly higher gain before servo oscillation happens. However, I still can't run sufficient roll gain to compensate for frame roll without causing gimbal roll oscillation.
Old Nov 08, 2012, 03:54 PM
s6100021 is offline
Find More Posts by s6100021
Registered User

Ecilop Chasing X8


here is my first video

Ecilop Chasing X8

Ecilop Chasing X8 (2 min 31 sec)
Old Nov 08, 2012, 06:09 PM
TAP993 is offline
Find More Posts by TAP993
Registered User
TAP993's Avatar
Quote:
Originally Posted by s6100021 View Post
here is my first video

Ecilop Chasing X8
Pretty good for a first, way better than my first ! There's quite a lot of horizon wobble, which I've learnt is the hardest thing to dial out. I'm still trying....The sand must play havoc, do you have to vacuum it after each session?
Old Nov 08, 2012, 06:21 PM
TAP993 is offline
Find More Posts by TAP993
Registered User
TAP993's Avatar
Quote:
Originally Posted by InfinitR View Post
Thanks, I'll take a look.

In an effort to relocate my HDMI converter, I realized that at a cost of 20 grams you can use the alternate camera mount as a backpack. I just had to add a spacer on the tripod mount screw.
You could get that 20gms back by removing the HDMI casing and phono plugs. Reasonably easy to do, there's a good tutorial somewhere on RCGroups but can't find it right now


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Five easy piece f-14 tomcat bobdaeronort Foamies (Scratchbuilt) 80 Oct 25, 2012 06:43 PM
Discussion Easy Glider VS Easy Glider Pro (what's different?) MkFn Electric Sailplanes 7 Nov 17, 2011 08:42 PM
Discussion Easi Glider film boca55 Serbia 0 Apr 20, 2008 05:46 PM
Discussion Spring Easi* in NZ harrys one Aerial Photography 8 Nov 14, 2007 02:22 PM