Concorde EDF69 in production and soon in sale - RC Groups
Thread Tools
Apr 23, 2012, 05:37 PM
Registered User
Discussion

Concorde EDF69 in production and soon in sale


Hi RC Flyers fans,
I just wanna share with you some information about this wonderful Concorde.
Many months of hard hard work into it. It's been a big challenge to reproduce
exactly this concorde on scale of 1/25.
Here are some characteristics:

Length : 2.50 m
Wingspan : 1 m
Weight : 2.9 kg including battery
Made in EPP Foam
EDF Fan units : 2x Wemotec minifan 69mm
Motors : 2 x HET Typhoon 2w25
Controllers : 2 x Turnigy 60A
Battery : 6S 5000 mah 40C
Retractable Landing Gear

Facts :
It will be available mid july 2012.
The kit will include everything inside except the receiver.

The plane comes in 3 parts. Nose and tail are very easy to remove for transportation!
British Airways and Air France decals included.
3 Hours of construction only.
300 kits for Europe and 200 for USA available only.
The pictures below are from the prototype. More will follow with also video in HD.

If anyone interested please stay tuned for more information!

Any comments or questions? please feel free to ask!

Gerald.
Sign up now
to remove ads between posts
Apr 23, 2012, 05:51 PM
Registered User
Joe 1320's Avatar
I have to know more about this...... always wanted a Concorde.

No dropping nose?
Apr 23, 2012, 05:53 PM
Long-Time Member
James Frolik's Avatar
Where will this be manufactured? Can the nose droop for landings? And why only 300 for Europe and 200 for the U.S.?
Apr 23, 2012, 05:54 PM
Registered User
4stripes's Avatar
Nice!
Apr 23, 2012, 06:11 PM
Registered User
Hi Guys,
Thanks for your reply!
Unfortunately no dropping nose... It would have been fragile and too many complications for
development and cost production. Besides anyone can still make the modifications if desired.
Foam is easy to work with.
Two offices will open soon. One in Tampa, Florida for the US and one in Paris for Europe.
500 kits in total will be manufactured. Not more. 300 are expected to be sold in Europe and 200 in USA.
Apr 23, 2012, 06:19 PM
Registered User

Video on Youtube! Take off and Landing!


Little space but feasible
Landing a little rough but ok!

Enjoy Folks!!!
concorde vol 001 (10 min 8 sec)
Apr 23, 2012, 06:25 PM
Go Hawks!
cryhavoc38's Avatar
very nice jet!
Apr 23, 2012, 07:40 PM
Registered User
4stripes's Avatar
Gerald
I enjoyed the video but I just have one comment. It needs to run quieter fans like the Changesun 10 blade variety. The days of "dentist drill" sounding jets is over.
Cheers Eric
Apr 23, 2012, 07:47 PM
Registered User
Joe 1320's Avatar
Quote:
Originally Posted by mrchalupas
Hi Guys,
Thanks for your reply!
Unfortunately no dropping nose... It would have been fragile and too many complications for
development and cost production. Besides anyone can still make the modifications if desired.
Foam is easy to work with.
Two offices will open soon. One in Tampa, Florida for the US and one in Paris for Europe.
500 kits in total will be manufactured. Not more. 300 are expected to be sold in Europe and 200 in USA.
Tampa is just down the road from me, can't wait to see the production version. Any chance of getting just the airframe with no electronics?
Apr 23, 2012, 10:38 PM
Up-Out-&-Gone
demondriver's Avatar
Not bad for the French! Lol I think they had something to do with the Real Concorde's design & construction. . .LMAO! Very nice Jet!
Latest blog entry: My RC 737 Assembly line!
Apr 23, 2012, 10:52 PM
jofro
Finally! Nice to see something different, that will sell like a hot "crosson" at the sunday market IMO, well done Guys, tho haven't watched the vid, too long for my patiency, Joe.
Apr 24, 2012, 12:26 AM
Official Boat Bum
Eddie P's Avatar
I am interested. I'll be watching.
Apr 24, 2012, 03:21 AM
Registered User
Hi mrchalupas,

wonderful!

That is exactly what I have been looking for since quite a while! Great job!

Will there be a distributor in Germany or Austria or shall I order it directly in France? I live in Germany.

Greetings

Michael
Apr 24, 2012, 06:18 AM
Registered User
Hi guys,

We have thought about the Changesun 10 blades configuration with Typhoon
2w30 (2200 kv) 6S but did not have enough time to make benchmarks.
We will do this soon. This is the prototype and for the first flights we just wanted to use a "classic" configuration. We needed to validate many many things like the wing profile, landing gear... ... before adding edf choice also.
Wemotec choice is not final yet. We will try others soon and take a decision!

Cheers,

Gerald.
Apr 24, 2012, 07:28 AM
Registered User
Hi joe,
Yes Airframe only will be available as this plane at this scale is for real advanced flyers and we'll let them free to configure this beauty as they wish!

Yes Michael we will let u know as soon as the european web site is opened for more information and and taking pre orders.

All pre orders made on European and US websites will be free of charge with no deposit. Reservations will be required as only limited quantities will be manufactured.

Cheers,

Gerald.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool .... DJO Electric Plane Talk 1 Jan 28, 2012 03:05 PM
Discussion XAircraft new product X450 will be launched very soon..... xaircraft Multirotor Drone Talk 84 Jan 28, 2011 04:29 PM
Contest Breakthrough new product coming soon! BUT we need a name first! ildo Batteries and Chargers 184 May 23, 2008 05:03 PM