Thread Tools
Nov 05, 2001, 10:30 PM
Real Men Fly Pink Planes...
kepople's Avatar

Hitec Flash 4 Problem...

I was breaking in a motor and after about 30 mins the transmitter battery ran down. Charged it up and when I turned it back on it had dumped all the settings on channel 1 and switched to Glide Mode. I cannot set it to ACRO mode as it is a flash 4.

Any ideas? Will it still fly on Glider mode?

Cant tell if the throttle works yet.

Sign up now
to remove ads between posts
Nov 05, 2001, 10:43 PM
kirbky; something funny is going on here! you can take the main battery out and not lose settings. it has a memory battery inside for that reason.the memory battery is rated for 5 years......gregg
Nov 06, 2001, 12:48 AM
Real Men Fly Pink Planes...
kepople's Avatar
Yes something funny is going on here. Only Channel 1 is stuck in the Glide mode, which it is not supposed to be doing. THat should be Channel 4&5. All other channels retained thier memory.

Nov 06, 2001, 12:48 PM
Space Coast USA
hoppy's Avatar
Go to the menu that has "reset" on it and "reset". I had a problem with a screwed up memory and that fixed it.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
WTB: HiTec Flash 4 or 5 tenover Aircraft - Electric - Airplanes (FS/W) 0 Jan 12, 2002 01:48 AM
Cannot sort elevon mixing with Hitec flash 4 trickyrik Foamies (Kits) 8 Dec 27, 2001 11:50 AM
Hitec Flash 4 system X Flaperons Rocken Power Systems 11 Nov 11, 2001 09:22 PM
Hitec Flash 4/5 question LuckyArmpit Electric Plane Talk 4 Oct 08, 2001 01:34 PM
Training with Hitec Flash 4/5X WAR Beginner Training Area (Aircraft-Electric) 2 Jul 27, 2001 12:02 AM