Vintage & Old-Timer Plans PRE 1977 PLANS ONLY - Page 22 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 19, 2012, 01:45 PM
Owner - Flying Models
The Demoiselle is a delightful flyer. I did one years ago for CO2 FF and still have it on display in my shop.

http://www.gryffinaero.com/models/ff...dels/dem1.html
http://www.gryffinaero.com/models/ff...dels/dem2.html

My friend Darren Bos borrowed my documentation and did a 30-inch version for RC that was published in RC Microflight in 2001 or so. I am pretty sure the plans are still floating around on the internet.
Sign up now
to remove ads between posts
Nov 19, 2012, 02:51 PM
Registered User
Hello Chaps. Does any one have the plan of DB, "Push Moth" single channel rc.
Nov 20, 2012, 02:00 AM
Registered User
Mark Winstanley's Avatar
Quote:
Originally Posted by Thayer
The Demoiselle is a delightful flyer. I did one years ago for CO2 FF and still have it on display in my shop.

http://www.gryffinaero.com/models/ff...dels/dem1.html
http://www.gryffinaero.com/models/ff...dels/dem2.html

My friend Darren Bos borrowed my documentation and did a 30-inch version for RC that was published in RC Microflight in 2001 or so. I am pretty sure the plans are still floating around on the internet.
Thayer; nice model. I would like to build the MAN version for 3 channel RC but if there is one available already maybe I should look at that too. I have printed to one that Ray provided and it comes out at 27 inches when printed out 3 times that provided by Ray. I will search for the one you refer to.

Mark.
Nov 20, 2012, 02:59 AM
Reduce the drama...
rick.benjamin's Avatar
Quote:
Originally Posted by helmsman
Hello Chaps. Does any one have the plan of DB, "Push Moth" single channel rc.
Have a look here
http://174.142.160.206/viewtopic.php...11223&start=60
Nov 20, 2012, 05:13 AM
Registered User
Mark Winstanley's Avatar
Quote:
Originally Posted by rick.benjamin
A reprint of this was given away in a special edition of RCM&E as I recall. Was it last year or 2010 (my mind is going). On one side was Ohm8 and the Push Moth on the other. If you can get a copy of the mag it was a good read as I recall. I have a copy but it is in Canada and I am in Germany so I can't help provide a copy.

Rick; that web site is a real gold mine though. Lots of plans. Any idea how to open the .rar files though?

Mark.
Nov 20, 2012, 05:43 AM
WMD
WMD
Womble of Model Depiction
WMD's Avatar
Me, I use a program called winRAR it was a free trial and has a nag screen each time, but works fine. Had it for years actually, it's still running.
Nov 20, 2012, 07:10 AM
So I'M meant to be in control?
Colonel Blink's Avatar
Quote:
Originally Posted by WMD
......has a nag screen each time....
Excellent terminology! But I too have been using my trial version for upwards of 5 years now....
Nov 20, 2012, 11:11 AM
Registered User
perttime's Avatar
Quote:
Originally Posted by WMD
Me, I use a program called winRAR it was a free trial and has a nag screen each time, but works fine. Had it for years actually, it's still running.
Ever tried 7zip?
http://www.7-zip.org/

Packing / unpacking: 7z, XZ, BZIP2, GZIP, TAR, ZIP and WIM
Unpacking only: ARJ, CAB, CHM, CPIO, CramFS, DEB, DMG, FAT, HFS, ISO, LZH, LZMA, MBR, MSI, NSIS, NTFS, RAR, RPM, SquashFS, UDF, VHD, WIM, XAR and Z.

It is free and doesn't nag.
Nov 20, 2012, 04:19 PM
Registered User

Hawk


Here`s one for the pot. Build em small and have a ball.
Last edited by helmsman; Nov 20, 2012 at 04:22 PM. Reason: to short
Nov 20, 2012, 06:39 PM
Reduce the drama...
rick.benjamin's Avatar
Quote:
Originally Posted by Mark Winstanley
Rick; that web site is a real gold mine though. Lots of plans. Any idea how to open the .rar files though?
Mark.
I use 7zip, it's a free program
http://www.7-zip.org/
Nov 20, 2012, 08:47 PM
Hatters gonna hat.
madbomber's Avatar
Quote:
Originally Posted by rick.benjamin

Does anyone have the Kadet Sr. plans from that site? It wouldnt let me download them.
Nov 21, 2012, 12:52 AM
Reduce the drama...
rick.benjamin's Avatar
Hat;
134mb. The server owners said it was a bit too large.
Nov 21, 2012, 07:27 AM
Registered User
Mark Winstanley's Avatar
Quote:
Originally Posted by helmsman
Here`s one for the pot. Build em small and have a ball.
Thanks Helmsman. A friend (Mike Wilkinson) and I built this when it first came out. Not knowing much about anything and the fact that our elastic bands were too weak for the wings, we had very erratic flights. I also remember being chased off the Prenton golf course for using the greens as a runway (the only useful thing I still consider them to be for!).

Anyway - thanks again for the memory. I think I might have another go but this time electric and depron with 3 channel radio. Now where is the nearest golfcourse....?

Mark.
Nov 21, 2012, 08:33 AM
WMD
WMD
Womble of Model Depiction
WMD's Avatar
Quote:
Originally Posted by perttime
Ever tried 7zip?
http://www.7-zip.org/

Packing / unpacking: 7z, XZ, BZIP2, GZIP, TAR, ZIP and WIM
Unpacking only: ARJ, CAB, CHM, CPIO, CramFS, DEB, DMG, FAT, HFS, ISO, LZH, LZMA, MBR, MSI, NSIS, NTFS, RAR, RPM, SquashFS, UDF, VHD, WIM, XAR and Z.

It is free and doesn't nag.
Excellent. That works nicely. Thanks.
Nov 26, 2012, 10:19 AM
Registered User
Mark Winstanley's Avatar
Quote:
Originally Posted by helmsman
Hello Chaps. Does any one have the plan of DB, "Push Moth" single channel rc.
Found one in my archives. It is a TIFF file so caannot be posted here. PM me and I will email you a copy.

Mark


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log 2012 Vintage and Old Timer buildoff-the Dennyplane Jr CashRC Vintage & Old-Timer Designs 43 Sep 04, 2015 11:25 AM
Discussion 2012 Vintage & Old-Timer Build-Off- Lancer 72 from Klarich short kit-a continuation. JohnAV8R Vintage & Old-Timer Designs 28 Oct 18, 2013 08:04 PM
Contest 2012 Vintage & Old-Timer Build-Off orange&white Vintage & Old-Timer Designs 171 Dec 25, 2012 11:24 PM
Poll VOTING for The 2011 Vintage and Old-Timer Build Off orange&white Vintage & Old-Timer Designs 9 Nov 30, 2011 12:57 PM