New Products Flash Sale
Thread Tools
Old Apr 21, 2012, 12:51 PM
JROMA is offline
Find More Posts by JROMA
Registered User
Help!

Help with measures of motor bearings for a K & B 40 Rear Exhaust


Dear colleagues,
I have a K & B engine 40 Rear Exhaust I bought a little time here in RC Groups.
For all I know this is a model of a engine older model but good performance.
The copy I bought, unfortunately seems to have been treated badly and came with split rear bearing (among other misfortunes) ..
I've been looking for them in online stores (as with much help even told by a member of RC Groups here), but measures of these bearings it seems they are special, they are narrower in width than most others used today (both front and rear).
I ask if there among you who know these engines-tions, to help me find them, or at least teach me what are the right steps and I managed to buy from Bocca Bearings, a couple of them that has the correct width and external measures, but not the "ring" inside (do not serve in the engine crankshaft).
I really appreciate your attention and I apologize for my bad English.
Hugs
Jorge
Last edited by JROMA; Apr 21, 2012 at 02:32 PM.
Sign up now
to remove ads between posts
Old Apr 21, 2012, 01:43 PM
GeoffinIN is offline
Find More Posts by GeoffinIN
Two left thumbs
Perhaps this company can help: http://rcbearings.com/
Or you can contact the present K&B Engines owner: http://www.mecoa.com/kb/

Good luck!

Geoff
Old Apr 21, 2012, 02:42 PM
Gnu4FF is offline
Find More Posts by Gnu4FF
Registered User
R/C Bearings seems to only carry items for the K&B .61.
Old Apr 21, 2012, 04:31 PM
Chip01 is offline
Find More Posts by Chip01
Registered User
Just send a message to RC Bearings and he will look up the bearing size for you. I am sure he has just what you need. He does not have all bearings for all engines listed on the the web page but he usually knows just what you need. And his prices are reasonable. So do send a message to http://rcbearings. com/ and he will respond. He's a great man.
Old Apr 25, 2012, 10:45 AM
JROMA is offline
Find More Posts by JROMA
Registered User
Thank you for your attention and help.
I'll try to contact RC bearings and see what I can.
Old Apr 25, 2012, 09:32 PM
desertsky is offline
Find More Posts by desertsky
www.rcbearings.com

K&B RE Quickie 500 engine


I looked it up and, unfortunately, I do not stock those bearings. I don't think I ever will because they are not commonly used anywhere but on old K&B engines. Sorry I couldn't help you this time.

Paul McIntosh
RCBearings.com
Old Apr 26, 2012, 11:22 PM
JROMA is offline
Find More Posts by JROMA
Registered User
Dear Mr. Paul, I appreciate your attention. I'll try to find out the measurements of the bearings and keep trying to get them.
Hugs
Jorge
Old Apr 28, 2012, 09:29 AM
GeoffinIN is offline
Find More Posts by GeoffinIN
Two left thumbs
Jorge, is this the engine you have? If it is, I will disassemble and measure this engine's bearings, and maybe I can help you to find bearings for yours. Or, I will trade this engine for something that you do not need. Mine is new, never been run.

Geoff
Old Apr 28, 2012, 05:09 PM
JROMA is offline
Find More Posts by JROMA
Registered User
Hello Geoff,
Yes is the same as I have here.
I did not want to work for both people.
Thank you for your kindness.
Old Apr 29, 2012, 09:49 AM
GeoffinIN is offline
Find More Posts by GeoffinIN
Two left thumbs
Jorge, the inner bearing measures 1.125" outer diameter, 15mm inner diameter, and is 1/4" wide. The very large diameter of the crankshaft requires this unusual mix of metric and inch dimensions. The outer bearing appears to be normal. We will find something for you!

Geoff
Old Apr 29, 2012, 06:25 PM
JROMA is offline
Find More Posts by JROMA
Registered User
Dear Geoff,
His efforts to help me is what I admire most in this hobby.
People who do not know if seeking help more than 5.000 miles away an old pair coordinate engine "toy".
This is really wonderful.
That life was smiling at him.
When I see that I am most happy to belong to this wonderful species (and complicated) that is the human being.
I repeat the words I have used before here: This is why I practice this hobby ...
I often call "child" but I confess that if all they lived with the "children" generous (like you) that I live, I believe it would also be "children".
Hugs and thanks again ...
Jorge
Old May 07, 2012, 10:00 PM
desertsky is offline
Find More Posts by desertsky
www.rcbearings.com
Boca stocks this bearing. it is called a B15R8T. Search for the K&B Quickie 500 RE


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Vintage K&B Rear Rotor W/Coupled Exhaust on a Vintage Aluminum Mount $65.00 SHIPPED stevster Aircraft - Fuel - Engines and Accessories (FS/W) 1 Apr 25, 2012 08:48 PM
Sold K&B .40 with muffler/K&B carb $35 shipped sagomon Aircraft - Fuel - Engines and Accessories (FS/W) 0 Jan 28, 2012 06:31 PM
For Sale K&B 6.5 rear intake rear exhaust ex F1 NEW Chuchuf Aircraft - Fuel - Engines and Accessories (FS/W) 1 Jun 09, 2011 08:51 AM
Sold K&B .15 Rear Rotor Side Exhaust Two Engines Jeff Worsham Aircraft - Fuel - Engines and Accessories (FS/W) 5 Apr 02, 2010 12:47 PM
Help! K&B 6.5cc Rear Exhaust engine... Info? NickBell Engines 3 Jul 08, 2007 11:01 AM