gyro setup on trex 250 clone help please
i am trying to set up a gyro on my trex 250 clone and i cant get my head around it, i have tried watching videos and reading through posts but its just not sinking in or there is something wrong with my gyro?
i get really bad tail wag as soon as it comes light on the skids and i seem to have tried everything to fix it without success.
am i right in thinking that the little pots on the gyro make no difference when the heli is connected to my dx7s tx?
also the tail servo travels full one way but hardly moves the other way, allthough i have travel at 100% in the settings on the radio.
this setting end points etc is crazy and so confusing especially when i cant find any info for it with the dxs7.
i have my dx7 set up to the gyro switch as pos1 - 0 pos2 - 70% pos3 - 80%
no matter what i change these to it makes no difference, the only way it will fly is in pos1 with 0% but its very hard to fly as you have to keep control of the tail constantly but it does stop the tail wag.
please help as i am exhausted lol
Ok, nearly solved by trial and error,
For some reason if I set my gyro to
It stops the tail wag in pos 1 or 2 in pos 0 it turns the gyro off once you go to -10 or below?
It's really strange as my trex 450 has 60% on all positions,
Can anyone shed any light on this ? Also the tail wag has stopped but it doesn't hold firm it slowly drifts to the right(nose) and I have to keep correcting it but if I change the settings above or below 5 it wags again ?
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||Trex 250 Futaba Setup help||rhysduk||Electric Heli Talk||4||Feb 21, 2012 05:23 PM|
|Help!||Trex 250 tx setup on a dx7||kicekilla||Electric Heli Talk||8||Dec 29, 2011 08:58 PM|
|Help!||Setup for Trex 250 (Or Clone)||Rocketman1092||Micro Helis||5||Sep 06, 2010 01:25 PM|
|Sold||Trex 250 setup with Logitech Gyro and alot of spare parts||phoneguy||Aircraft - Electric - Helis (FS/W)||3||Apr 12, 2009 05:07 PM|
|Align HH gyro on Trex-need help w/setup||atrr||Mini Helis||27||Feb 13, 2009 03:56 AM|