Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Apr 18, 2012, 01:29 PM
traxxas13 is offline
Find More Posts by traxxas13
why am i here???????
Discussion

Need some advice for steering servo for racing


I plan on getting into 4wd short course racing and i am not sure what servo speed and torque i should aim for. i am looking at a hitec servo at 6v with a transit time of .07 and torque of 188 oz if i remember correctly. will this be plenty for a 4wd short course truck for steering in race conditions.
Sign up now
to remove ads between posts
Old Apr 18, 2012, 09:19 PM
imgumby is offline
Find More Posts by imgumby
Registered User
imgumby's Avatar
can you give a hitec model # ??

good luck
imgumby
Old Apr 18, 2012, 10:08 PM
traxxas13 is offline
Find More Posts by traxxas13
why am i here???????
hitec HS-7940TH servo is the one i am looking at.
Old Apr 18, 2012, 10:53 PM
wparsons is offline
Find More Posts by wparsons
Registered User
wparsons's Avatar
188oz/in is a TON of power for a 1/10th scale SCT.
Old Apr 19, 2012, 03:48 PM
traxxas13 is offline
Find More Posts by traxxas13
why am i here???????
ok is the speed gonna be too much or not. i was starting to think that 188oz or torque might be on the high end but can there be too much. i just want a high quality servo that won't crap out on me at the last minute.
Old Apr 19, 2012, 05:55 PM
wparsons is offline
Find More Posts by wparsons
Registered User
wparsons's Avatar
The servo only reacts as fast as your hand/fingers, so if you move slowly so does the servo.

You can't have too much power really, just don't spend a fortune to get that much power. 100oz/in should be plenty for a SCT.
Old Apr 19, 2012, 07:40 PM
traxxas13 is offline
Find More Posts by traxxas13
why am i here???????
ok thanks i plan on shooting for about 150 oz of torque. or i might just get the hitec servo i am looking at.
Old Apr 19, 2012, 11:19 PM
rangamatchstic is offline
Find More Posts by rangamatchstic
Registered User
id go savox, i have a hitecs in all of mine and when i compare them to my mates savox servos which were the same price they are in another league. The hitecs have ALOT! of play in the gears and for about $70 (the same price as my hitec when i bought it which is a HS5625MG) you can get a savox with the same torque, 0.07 to 60 degrees and basicly no play in the gears.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion need some advice on buying the MJX-F45 or the G.Tec 9019 alcatres Large Electric Helis 7 May 27, 2012 01:13 PM
Help! Initial Setup - Apprentice...need some advice before buying. holic86 Beginner Training Area (Aircraft-Electric) 17 Apr 12, 2012 03:54 PM
Discussion Need some advice please quadcopter goldsworthy Multirotor Talk 5 Mar 09, 2012 05:41 PM
Discussion Need some advice for a boat traxxas13 Racing Boats - Electric 19 Oct 08, 2011 01:32 PM