Thread Tools
Apr 14, 2012, 07:57 PM
Registered User
Discussion

Help with CX-CT6c


Hi Guys,
I'm new to RC helicopter, I have copterx 450me-rtf, I accidentaly reset my transmitter (CX-CT6C-mode1) to factory setting, now the motor is running even the throttle is at minimum level. Do you know where i can download the baseline config for this transmitter. Also, is it possible for this modem to convert to Mode2? Thank you.
Sign up now
to remove ads between posts
Apr 15, 2012, 04:13 AM
Registered User
Have you tried asking the seller?
Apr 15, 2012, 02:17 PM
Crash and learn
FS-CT6B transmitter for 450V2

These are likely close to what you want.
Apr 16, 2012, 07:27 AM
Registered User
Thank you. I will use this as my baseline config.
Apr 19, 2012, 08:35 AM
Team Wack-a-Mole
Melnic's Avatar
blueray 450 baseline will work bu you may have to play with servo reversing and swash pmix polarity
http://www.mycoolheli.com/t6config.html
Dec 06, 2012, 01:10 PM
Suspended Account
...
Last edited by XtalHunt; Dec 06, 2012 at 01:26 PM.
Mar 19, 2014, 08:33 PM
Registered User
Quote:
Originally Posted by Melnic
blueray 450 baseline will work bu you may have to play with servo reversing and swash pmix polarity
http://www.mycoolheli.com/t6config.html
Hi, I got this transmitter, mode 2.
But I choose mode 1 in the stick mode menu, The throttle is 100% when the stick is all the way down.

I tried to reverse anything possible but no way.

So now, instead of seting my pitch curve : 40,45,50,75,100 I must set to 100,75,50,45,40 !!!!!!!!!!

I don't want to try hovering with this setting.

Please help
Last edited by Yoneal; Mar 20, 2014 at 08:08 AM.
Mar 20, 2014, 01:50 PM
Heli nut " the wife said so "
holtneil's Avatar
Hi mate that copterx transmitter has i file called recovery this should hold all the factroy settings for transmitter and models here is a link for the manual start at page 10 the transmitter can run all modes 1 to 4
http://www.ky-model.com/copterx/cx-ct6c_manual.pdf
Mar 20, 2014, 08:20 PM
Registered User
Quote:
Originally Posted by holtneil
Hi mate that copterx transmitter has i file called recovery this should hold all the factroy settings for transmitter and models here is a link for the manual start at page 10 the transmitter can run all modes 1 to 4
http://www.ky-model.com/copterx/cx-ct6c_manual.pdf
Hi, thanks for your answer, and sorry for my english, I'm french.

I tried anything possible.

Everything works great in mode 2.

But when I choose mode I, low stick will give me 100 and high stick will give me 0.

Of course I tried the menu CH. REV and any other possible thing.

Once again, everything is ok in mode 2.

I'm about to buy a new transmitter.

But what's the point to make it possible to change mode, when it's impossible to set it up right..

There should be a way....
Mar 21, 2014, 05:23 AM
Registered User
the point to make it possible to change mode, when it's impossible to set it up right


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Turnigy 9x with cx-ct6c mandytom Radios 0 Apr 04, 2012 12:52 AM
Sold CX-CT9A Transmitter with back lite crashdumby Aircraft - General - Radio Equipment (FS/W) 3 Mar 28, 2012 09:41 PM
Sold Copterx CX-3X1000 flybarless gyro with USB cable jgpncll Aircraft - Electric - Helis (FS/W) 0 Mar 25, 2012 12:37 PM
Discussion Questions - Copter X CX-CT6C Transmitter andione1983 Radios 0 Dec 31, 2011 11:55 PM
For Sale Blade cx & a blade cx 2 with aftermarket parts and tons of spares. Snyda Aircraft - Electric - Helis (FS/W) 1 Dec 08, 2011 05:01 AM