Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jun 30, 2012, 08:20 PM
Willyboy is offline
Find More Posts by Willyboy
Registered User
Willyboy's Avatar
Quote:
Originally Posted by J_skaggs View Post
I know. I can't use my programmable charger with the 130x battery either.
My 120 SR came with JST connectors and I really thought the 130X would have them.

Bob
Sign up now
to remove ads between posts
Old Jun 30, 2012, 08:25 PM
J_skaggs is offline
Find More Posts by J_skaggs
Registered User
Quote:
Originally Posted by Willyboy View Post
My 120 SR came with JST connectors and I really thought the 130X would have them.

Bob
One of the guys at the LHS said he is going to change his 130X connectors to micro dean connectors.
Old Jun 30, 2012, 08:29 PM
Willyboy is offline
Find More Posts by Willyboy
Registered User
Willyboy's Avatar
Quote:
Originally Posted by J_skaggs View Post
One of the guys at the LHS said he is going to change his 130X connectors to micro dean connectors.
I wish somebody would come up with a video and show how this is done. My electrical knowledge is extremely limited. The battery on the 130X has three wires in the connector and only two wires in the esc (I think). My JST connector have two wires only so I would be afraid to to put them on without a video for fear of burning up my board.

Bob
Old Jun 30, 2012, 08:31 PM
johnnyrocco123 is online now
Find More Posts by johnnyrocco123
You down with EPP?
johnnyrocco123's Avatar
Quote:
Originally Posted by Willyboy View Post
I wish somebody would come up with a video and show how this is done. My electrical knowledge is extremely limited. The battery on the 130X has three wires in the connector and only two wires in the esc (I think). My JST connector have two wires only so I would be afraid to to put them on without a video for fear of burning up my board.

Bob

Post some pics of the connectors that come stock on the ESC of the 130X as well as the connectors on the stock battery.

This way we can see what we are working with.
Old Jun 30, 2012, 08:34 PM
Willyboy is offline
Find More Posts by Willyboy
Registered User
Willyboy's Avatar
Quote:
Originally Posted by johnnyrocco123 View Post
Post some pics of the connectors that come stock on the ESC of the 130X as well as the connectors on the stock battery.

This way we can see what we are working with.
Okay, let me go down into the studio (garage) and take some photos.
Old Jun 30, 2012, 08:36 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Aren't the connectors the same as the mCPx?
Old Jun 30, 2012, 08:38 PM
turboparker is offline
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by Willyboy View Post
I wonder why Blade didn't put JST connectors on the batteries and ESC? Now I can't balance or parallel charge with those e-flite connectors.

Bob
Quote:
Originally Posted by J_skaggs View Post
I know. I can't use my programmable charger with the 130x battery either.
Most of us who fly the 2s UMX planes have been balance-charging these 2s packs with our programmable chargers since back when the V1 Beast came out. Just get a UMX Beast charge-adapter harness from Glenn at RC-Connectors.com. http://www.rc-connectors.com/index.p...index&cPath=66

Progressive RC also makes them:

http://www.progressiverc.com/jst-ph-...beast-umx.html

http://www.progressiverc.com/paralle...beast-umx.html

As does Eflite:

http://www.e-fliterc.com/Products/De...odID=EFLA700UM

http://www.e-fliterc.com/Products/De...dID=EFLA7001UM

Joel
Old Jun 30, 2012, 08:42 PM
turboparker is offline
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by turnerm View Post
Aren't the connectors the same as the mCPx?
Turnerm,

The 130X is 2s, and it uses the same connector as the 2s UMX planes (JST 'PH' 3-pin).

Joel
Last edited by turboparker; Jun 30, 2012 at 08:48 PM.
Old Jun 30, 2012, 08:43 PM
Sudsak is offline
Find More Posts by Sudsak
Registered User
Quote:
Originally Posted by turboparker View Post
Most of us who fly the 2s UMX planes have been balance-charging these 2s packs with our programmable chargers since back when the V1 Beast came out. Just get a UMX Beast charge-adapter harness from Glenn at RC-Connectors.com. http://www.rc-connectors.com/index.p...index&cPath=66

Progressive RC also makes them:

http://www.progressiverc.com/jst-ph-...beast-umx.html

http://www.progressiverc.com/paralle...beast-umx.html

As does Eflite:

http://www.e-fliterc.com/Products/De...odID=EFLA700UM

http://www.e-fliterc.com/Products/De...dID=EFLA7001UM

Joel
Thanks Joel

I'm about 85% sure that EFLA7001UM is the one you need to charge/balance the 130 X battery. That's the one I was going to order to use with my Celectra 80W charger.
Old Jun 30, 2012, 08:47 PM
sertav is offline
Find More Posts by sertav
Suspended Account
I don't understand how these 2S batteries balance without a separate lead to go to a balance board. I've never had batteries like this and I don't believe my charger would charge in "balance mode" without giving me some kind of disconnect error because there's nothing plugged into the balance circuit. Do they just automatically balance every time they charge, regardless of the charger?
Old Jun 30, 2012, 08:49 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by turboparker View Post
Turnerm,

The 130X is 2s, and it uses the same connector as the 2s UMX planes (JST 'PH' 3-pin).

Joel
Cool. Thanks.
Old Jun 30, 2012, 08:58 PM
turboparker is offline
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by Sudsak View Post
Thanks Joel

I'm about 85% sure that EFLA7001UM is the one you need to charge/balance the 130 X battery. That's the one I was going to order to use with my Celectra 80W charger.
Quote:
Originally Posted by sertav View Post
I don't understand how these 2S batteries balance without a separate lead to go to a balance board. I've never had batteries like this and I don't believe my charger would charge in "balance mode" without giving me some kind of disconnect error because there's nothing plugged into the balance circuit. Do they just automatically balance every time they charge, regardless of the charger?
Sudsak,

You're welcome. Just to clarify - all of the harnesses I listed will charge the 130X battery. The difference between the two Elfite harnesses is the balance-tap plug. One is for Thunder Power-style balance-boards, while the the other is for XH-style boards.

Sertav,

The charge-harnesses I listed in my earlier post solve that problem by providing banana plugs for charging charge & a balance connector for balancing. As I said - most of us who fly the 2s UMX planes have been doing this for about 1.5 years already.

Joel
Old Jun 30, 2012, 09:04 PM
sertav is offline
Find More Posts by sertav
Suspended Account
Quote:
Originally Posted by turboparker View Post
Sertav,

The charge-harnesses I listed in my earlier post solve that problem by providing banana plugs for charging charge & a balance connector for balancing. As I said - most of us who fly the 2s UMX planes have been doing this for about 1.5 years already.

Joel
Thanks for the help. I didn't click on the larger pictures to see the whole adapter. Makes sense now. One more question, if you don't mind... With the 6 battery adapter from Progressive, do you just add the capacities for an overall C rating like you do with charging multiple 1S batteries in parallel?

Also, for anyone else in the know... Is Hyperion making batteries that will work with the 130 X yet?
Old Jun 30, 2012, 09:12 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by sertav View Post
Thanks for the help. I didn't click on the larger pictures to see the whole adapter. Makes sense now. One more question, if you don't mind... With the 6 battery adapter from Progressive, do you just add the capacities for an overall C rating like you do with charging multiple 1S batteries in parallel?

Also, for anyone else in the know... Is Hyperion making batteries that will work with the 130 X yet?
Yea. Just multiply the amps per battery by 6. So if you're doing 300mah batts at 3c you'd charge each one at .9 amps and you'd charge 6 (using this cable) at 5.4 amps.

Contact Rcbabbel on these forums. He rolls his own Hyperions (babbelbats) and they are awesome. He has some for the 130x I believe.
Old Jun 30, 2012, 09:12 PM
Willyboy is offline
Find More Posts by Willyboy
Registered User
Willyboy's Avatar
Quote:
Originally Posted by johnnyrocco123 View Post
Post some pics of the connectors that come stock on the ESC of the 130X as well as the connectors on the stock battery.

This way we can see what we are working with.
Photos as requested.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale New in the box E-Flite Taylorcraft ARF Kit plus High Performance E-Flite components Philscho Aircraft - Electric - Airplanes (FS/W) 4 Aug 19, 2012 01:25 AM
For Sale E-Flite 300 32e SHP ****SOLD*** E-Flite still aviable tomtheman Aircraft - Electric - Airplanes (FS/W) 2 Mar 28, 2012 09:01 PM
Sold E-flite 60A ESC w/ E-flite Brushless 1010kV Motor joshfneptune Aircraft - Electric - Power Systems (FS/W) 3 Mar 05, 2012 09:18 PM
Discussion E-Flite Taylorcraft 450 ARF Kit and High Power E-Flite electrical components $300 Philscho Hot Online Deals 1 Mar 02, 2012 09:11 PM
Discussion E-Flite Su-26 and E-flite Extra 260 repair Joe Slow Crash Discussion 1 Sep 27, 2011 12:50 PM