Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 15, 2013, 06:44 AM
Jboy90277 is offline
Find More Posts by Jboy90277
Registered User
Quote:
Originally Posted by SYMAWD View Post
Nice. Can you change out the main gear without having to unscrew the A gear with this frame?
Sign up now
to remove ads between posts
Old Mar 15, 2013, 10:27 AM
UniDaHero is offline
Find More Posts by UniDaHero
Registered User
Front yard flying. I have not taken the time to fix the issues with the tail because it hasn't really bothered me much...Noob moves so don't laugh.

Ron Talley Blade 130X Mild 3D in Front Yard (4 min 9 sec)
Old Mar 15, 2013, 10:37 AM
garryk is offline
Find More Posts by garryk
Corsair Captain
I would say that was some really smooth flying. Looks like you're no noob. Those are some very advanced moves.
Garry K.
Old Mar 15, 2013, 11:22 AM
erkq is online now
Find More Posts by erkq
Registered User
Nice flying. Nice pavers.
RCG Plus Member
Old Mar 15, 2013, 12:42 PM
UniDaHero is offline
Find More Posts by UniDaHero
Registered User
Quote:
Originally Posted by garryk View Post
I would say that was some really smooth flying. Looks like you're no noob. Those are some very advanced moves.
Garry K.
Thanks. I am soooooooooo much better in the Sim!

Quote:
Originally Posted by erkq View Post
Nice flying. Nice pavers.
Thanks. I don't know what I am more excited about this year, the fact that I can actually flip my helis or I get to install my sprinkler system this year and finish my yard.....

Diffidently more excited about the 130X!!!
Old Mar 15, 2013, 12:45 PM
SYMAWD is offline
Find More Posts by SYMAWD
Registered User
SYMAWD's Avatar
Quote:
Originally Posted by Jboy90277 View Post
Nice. Can you change out the main gear without having to unscrew the A gear with this frame?
No, that will always be necessary, unless a frame is designed with a ridiculously low bottom tray.
Old Mar 15, 2013, 02:37 PM
Jboy90277 is offline
Find More Posts by Jboy90277
Registered User
Quote:
Originally Posted by SYMAWD View Post
No, that will always be necessary, unless a frame is designed with a ridiculously low bottom tray.
Doesn't matter - I ordered 2 last night.
Old Mar 15, 2013, 07:31 PM
Alex Schauer is offline
Find More Posts by Alex Schauer
Registered User
Alex Schauer's Avatar
Quote:
Originally Posted by LonB View Post
Anyone know a retailer in the US that has the metal tail gear set, BLH3736A or other, in stock?
Ebay!
Old Mar 16, 2013, 09:38 AM
iTz Nicholas72 is offline
Find More Posts by iTz Nicholas72
Registered User
Quote:
Originally Posted by Alex Schauer View Post
Ebay!
Link? I did a search and nothing came up for me, even set the location to worldwide...

Going to replace the TT and boom on mine and see if that doesn't get rid if this stubborn tail wag I've been fighting the last 8 flights...
Old Mar 16, 2013, 10:14 AM
Nighthawk74 is offline
Find More Posts by Nighthawk74
RC addict? I'm not addicted...
Nighthawk74's Avatar
Man this heli is awesome when it works. I had a bad crash, and saw smoke comming from what I thought was the main board. Quickly unplugged the battery, checked the wires, all looked good. Noticed a loose wire (cold solder joint) on my right servo. Soldered it and plugged the batt back in. Still smoke this time comming from the main motor area (???) Quickly unplugged the batt again. Spent several minutes under a lamp and discovered the front servo had some wire melt onto the frame.

So how do I go about getting the front servo out?
Old Mar 16, 2013, 10:51 AM
HeliFax is offline
Find More Posts by HeliFax
Inverted Airfield
You have to separate the frame halves. Does your umbrella gear rub up against your elevator servo? If so, now is the time to file it down.
Old Mar 16, 2013, 11:02 AM
Nighthawk74 is offline
Find More Posts by Nighthawk74
RC addict? I'm not addicted...
Nighthawk74's Avatar
Quote:
Originally Posted by HeliFax View Post
You have to separate the frame halves. Does your umbrella gear rub up against your elevator servo? If so, now is the time to file it down.
Thanks for your feedback. No It doesn't rub. I have checked it several times
Old Mar 16, 2013, 01:46 PM
LonB is offline
Find More Posts by LonB
Unregistered User
Quote:
Originally Posted by HeliFax View Post
You have to separate the frame halves. Does your umbrella gear rub up against your elevator servo? If so, now is the time to file it down.
Mine's dangerously close too!
Old Mar 16, 2013, 01:51 PM
LonB is offline
Find More Posts by LonB
Unregistered User
Quote:
Originally Posted by iTz Nicholas72 View Post
Link? I did a search and nothing came up for me, even set the location to worldwide...

Going to replace the TT and boom on mine and see if that doesn't get rid if this stubborn tail wag I've been fighting the last 8 flights...
Just got my 130x and the torque tube tail gear was warped from molding. The new gear in the bag was also warped. I sent a video to Horizon Hobby and they are sending me new ones plus I ordered two more sets. I'm going to guess the new ones will be just as bad. The Blade optional metal tail gears aren't supposed to be out until May '13. I wonder what the eBay gears are...
Old Mar 17, 2013, 02:06 AM
Aphro is offline
Find More Posts by Aphro
ChuckTseeker Super Fan
Aphro's Avatar
Curious to see, could you post your video of the warped "C" gear...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale New in the box E-Flite Taylorcraft ARF Kit plus High Performance E-Flite components Philscho Aircraft - Electric - Airplanes (FS/W) 4 Aug 19, 2012 01:25 AM
For Sale E-Flite 300 32e SHP ****SOLD*** E-Flite still aviable tomtheman Aircraft - Electric - Airplanes (FS/W) 2 Mar 28, 2012 09:01 PM
Sold E-flite 60A ESC w/ E-flite Brushless 1010kV Motor joshfneptune Aircraft - Electric - Power Systems (FS/W) 3 Mar 05, 2012 09:18 PM
Discussion E-Flite Taylorcraft 450 ARF Kit and High Power E-Flite electrical components $300 Philscho Hot Online Deals 1 Mar 02, 2012 09:11 PM
Discussion E-Flite Su-26 and E-flite Extra 260 repair Joe Slow Crash Discussion 1 Sep 27, 2011 12:50 PM