BLADE130x ???????? - Page 366 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 08, 2012, 02:53 PM
Gone Huckin'
turnerm's Avatar
So frustrating!! I'm trying to change my tail blade grips but the little tiny screws appear to be stripped and I can't get them out so I can't remove the blade grips. I guess I'm going to have to buy a whole new tail shaft which is absurd. Anyone else run into this issue??
Sign up now
to remove ads between posts
Dec 08, 2012, 03:59 PM
REYNALDO
rynldgalano's Avatar

airborne crappy thing


if i only know i never change the set up of my tail servo.
Dec 08, 2012, 04:24 PM
Gone Huckin'
turnerm's Avatar
I just ordered the weighted micro heli tail shaft/grips along with the micro heli tail pitch slider. I couldn't get the stock grips off because of the ridiculously soft screws they used in there.
Dec 08, 2012, 06:08 PM
WIFE HAND LAUNCHED MY PLANES!
Spyro37's Avatar
Quote:
Originally Posted by turnerm
I just ordered the weighted micro heli tail shaft/grips along with the micro heli tail pitch slider. I couldn't get the stock grips off because of the ridiculously soft screws they used in there.
I bought both the Lynx & Microheli tail shaft/hub. WOW they are perfect square & took care of the tail vib. BOTH tail shafts are soft. The MH is worse. I bent them both on first soft crash on a the grass!
Careful pushing that MH tail hafts through the bearings as you could bend it even before the flight If you happen to bend it, you could re-straighten it back with just your fingers using same (one) hand to see what I mean.
The Lynx is a bit harder steel.
I end up buying a few of the stock shafts for my two 130s, then check & and see that has the least or no vibration. Both 130s now has solid tails. Hope they will last long.
Last edited by Spyro37; Dec 08, 2012 at 11:04 PM.
Dec 09, 2012, 02:14 PM
Registered User
carlostomasso's Avatar

here is mine :)


This is my 130 X
Dec 09, 2012, 05:23 PM
Registered User
Quote:
Originally Posted by carlostomasso
This is my 130 X
Are you being truthful, we haven't had weather in the UK like this for ages
Dec 09, 2012, 05:40 PM
Registered User
carlostomasso's Avatar

last week


Quote:
Originally Posted by FrankS
Are you being truthful, we haven't had weather in the UK like this for ages
Well yes, this was taken two weeks ago, and We had even yesterday weather like this

Tomas London
Going to fly my edge540QQ tomorrow am, hope to have time tonight to change my main gear & skids on the 130X so I can flick her a bit around
Dec 10, 2012, 01:22 AM
Flying with a "higher power"

Blade 130x metal Tail Gears?


I was at a hobby shop in LA this weekend and one of the knowledgeable people there said there is an after market metal tail gear set you can order online. Any one know where to get these?
Dec 10, 2012, 06:05 AM
Registered User
carlostomasso's Avatar

Cnc upgrades


Microheli.com
Lynx.com
Rakon heli.com
Dec 10, 2012, 06:33 AM
Registered User
carlostomasso's Avatar

My heli's


My heli hangar
Dec 10, 2012, 10:40 AM
Haway the lads!
Quote:
Originally Posted by turnerm
So frustrating!! I'm trying to change my tail blade grips but the little tiny screws appear to be stripped and I can't get them out so I can't remove the blade grips. I guess I'm going to have to buy a whole new tail shaft which is absurd. Anyone else run into this issue??
Yep, I concur. I am having the same issues with the soft screws. I want to change the tail shaft but like you am having difficulty removing the blade grips.
Dec 10, 2012, 10:54 AM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by warrenx
Yep, I concur. I am having the same issues with the soft screws. I want to change the tail shaft but like you am having difficulty removing the blade grips.
I couldn't get the grips off. I gave up and ordered a whole new tail from MH.
Dec 10, 2012, 03:12 PM
Registered User
Quote:
Originally Posted by rarner
I was at a hobby shop in LA this weekend and one of the knowledgeable people there said there is an after market metal tail gear set you can order online. Any one know where to get these?
There's a thread on HeliFreak about it:

http://helifreak.com/showpost.php?p=...3&postcount=50

The web pages are in Chinese. I just ended up emailing airbase and asking how much it would be (airbase10@yahoo.com)

They're a bit pricey, though. Here's what I paid for 2 sets:

New Black metal C & D gear (2 sets) = 38USD
EMS Express delivery shipping (3~4 days) USA= 14USD
4.2% handling charge for Paypal = 2.18USD
Total = 54.18USD
Airbase paypal account is: paypal@airbase.tw

I already lost one C gear in a crash - popped off when the tail boom shifted. Should have CA'd it onto the TT.
Dec 10, 2012, 03:50 PM
Flying with a "higher power"
Thanks for the replies, but none of these suppliers carry the Blade 130X metal tail gears?

Microheli.com
Lynx.com
Rakon heli.com

Airbase has none in stock until 12/18/12 at the earliest :-(

Jboy90277 how do you like the metal tail gears for the Blade 130x? Has it caused more torque tube failures or other failures in the tail assembly?
Dec 10, 2012, 04:38 PM
Registered User
Quote:
Originally Posted by rarner
Thanks for the replies, but none of these suppliers carry the Blade 130X metal tail gears?

Microheli.com
Lynx.com
Rakon heli.com

Airbase has none in stock until 12/18/12 at the earliest :-(

Jboy90277 how do you like the metal tail gears for the Blade 130x? Has it caused more torque tube failures or other failures in the tail assembly?
I like them, but if there's a problem with the tail setup, they just transfer the failure to another part of the heli.

On one of my 130Xs, I had put on the metal C gear and left the stock D gear. After stripping out 2 D gears in a row trying to isolate the source of some tail vibrations, I put in the metal D gear. Both metal gears held and helped me find out what the source of the problem was. It turns out I must have bent the tail spindle pushing it in - couldn't spot it with the naked eye. I know this was the problem because part of the spindle sheared off and flew across the room with the tail rotor assembly. I replaced the spindle and everything was perfect afterwards.

No problems with the TT so far. I'm going to CA the C gear onto the TT in the future - already lost one metal C gear when the tail boom popped loose in a crash.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale New in the box E-Flite Taylorcraft ARF Kit plus High Performance E-Flite components Philscho Aircraft - Electric - Airplanes (FS/W) 4 Aug 19, 2012 01:25 AM
For Sale E-Flite 300 32e SHP ****SOLD*** E-Flite still aviable tomtheman Aircraft - Electric - Airplanes (FS/W) 2 Mar 28, 2012 09:01 PM
Sold E-flite 60A ESC w/ E-flite Brushless 1010kV Motor joshfneptune Aircraft - Electric - Power Systems (FS/W) 3 Mar 05, 2012 09:18 PM
Discussion E-Flite Taylorcraft 450 ARF Kit and High Power E-Flite electrical components $300 Philscho Hot Online Deals 1 Mar 02, 2012 09:11 PM
Discussion E-Flite Su-26 and E-flite Extra 260 repair Joe Slow Crash Discussion 1 Sep 27, 2011 12:50 PM