Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Sep 27, 2012, 09:34 PM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Over 130 flights with original tail gears. Simple solution to not trashing them is just do not crash. I do not understand wht so many think the 130 X is good for crashing. If you want crash and fly get a mCPX not a 130X.


Charles
Sign up now
to remove ads between posts
Old Sep 27, 2012, 09:49 PM
garryk is offline
Find More Posts by garryk
Corsair Captain
I've been using the Lectron 450mAh 45C that can charge at 8C and I get 5 min. flights with mild 3D landing with 3.8V/Cell.
Garry K.
Old Sep 27, 2012, 09:55 PM
epoweredrc is offline
Find More Posts by epoweredrc
27 yrs. of Aircraft flying.
epoweredrc's Avatar
The nanos are good so Far and cheap the glacier from epbuddy are good also
I got a 6 minute flight on a Glacier not trying to forgot to land when timer went off LOL.

I really think some do plan to crash, I myself have only "crashed" 130X when tail blew out.
Last edited by epoweredrc; Sep 27, 2012 at 10:06 PM.
Old Sep 27, 2012, 10:01 PM
johnnyrocco123 is offline
Find More Posts by johnnyrocco123
You down with EPP?
johnnyrocco123's Avatar
Good to hear.

I don't plan on crashing the 130x. But then again, I don't think anyone plans on crashing
Old Sep 27, 2012, 11:29 PM
garryk is offline
Find More Posts by garryk
Corsair Captain
I try my new stunts with the brushless mcpx knowing that I'll probably crash, hoping I won't. LOL But it's much easier to repair IF something breaks. I LOVE the way my 130X fly's. I crashed it once tail first (of course). Nobody locally has the tail hub, so I spent a long time straightening my bent one. Finally got it right and with new gears and tail blade grips, it's better than ever. TOTALLY ROCK SOLID> YAAAAAAAAAAAAA!!!!!!!!!!
Garry K.
Old Sep 28, 2012, 01:04 AM
erkq is online now
Find More Posts by erkq
Registered User
I had something happen that I'm sure no one else has had. The tail started drifting and then CENTER then drift then CENTER. It was flyable... just a little weird. Turns out two screws had fallen out of the tail servo... two of the four that hold the plastic housing onto the circuit board. The screw holes had stripped. They wouldn't take new screws. How weird is that? So I just CA'd the housing in place. I figure if the glue job becomes an issue, then is when I'll buy a new servo.
RCG Plus Member
Old Sep 28, 2012, 01:40 AM
liduno is offline
Find More Posts by liduno
Registered User
liduno's Avatar
Quote:
Originally Posted by ssobol View Post
Don't know what radio you have, but there are various ways to get a back lit display on Spektrum radios that don't have them. There are turn key solutions as well as DIY. In one case the cost is ~10 bucks.
I thought about that but I don't want to void the warranty, hh is awesome about warranty work even after the product is out of warranty but I doubt they would warranty anything if I had a back light installed.

Quote:
Originally Posted by erkq View Post
Nobody wants the stock batteries. Once you get past the batteries there's absolutely no use for the stock chargers. They tell you nothing about voltage, balance numbers and most importantly nothing about how many mAh goes back into the battery. Oh... and they're slow!
The stock batteries aren't bad at all, mine pull pretty hard through the whole flight.

I only really do sport flying with some loops, flips and rolls, I hover inverted a little but no real hard 3d.
Old Sep 28, 2012, 01:52 AM
erkq is online now
Find More Posts by erkq
Registered User
Quote:
Originally Posted by liduno View Post
...

The stock batteries aren't bad at all, mine pull pretty hard through the whole flight.

...
I agree they're not bad. The one stock battery it came with is all I have right now and it flies very well on it. But I have some $12 Turnigy 45-90C's on order and I expect more powah! While E-flight batteries have become more serviceable lately almost anything else out-performs them at 1/2 to 1/3 the cost.
RCG Plus Member
Old Sep 28, 2012, 02:02 AM
NorCal is offline
Find More Posts by NorCal
Registered User

Loctite for Plastic


Quote:
Originally Posted by sideburn View Post
I destroyed a bunch of stock parts by putting loctitie on the screws. it made the plastic crumble apart.
It's spendy but worth it! I've been usin it on rc cars for years.

http://www.henkelna.com/us/content_d...king_Guide.pdf

http://www.shoplet.com/Loctite-425-A...S44242540/spdv
Old Sep 28, 2012, 02:22 AM
liduno is offline
Find More Posts by liduno
Registered User
liduno's Avatar
Quote:
Originally Posted by erkq View Post
I agree they're not bad. The one stock battery it came with is all I have right now and it flies very well on it. But I have some $12 Turnigy 45-90C's on order and I expect more powah! While E-flight batteries have become more serviceable lately almost anything else out-performs them at 1/2 to 1/3 the cost.
I hear the hyperions are supposed to be awesome.
Old Sep 28, 2012, 07:02 AM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Overall E Flite LiPolys suck. The 130 X ones are not 300 mAh closer to 360 but noy 25C either.

Best inexpenive LiPoly 2S 370 Nanotech. Less tha $5 ea. if 6X purchaeged .

Yes you need to change the connector.

Glacier 450 are now avai;. with UMX connector for $4.50. Great for sports flying a light 3D as they are heavier.

https://www.rcgroups.com/forums/show...91&postcount=7
Old Sep 28, 2012, 10:49 AM
crvnation is offline
Find More Posts by crvnation
Suspended Account
Quote:
Originally Posted by NorCal View Post
Good old CA works great as a "Loctite" for plastic.
Old Sep 28, 2012, 11:24 AM
erkq is online now
Find More Posts by erkq
Registered User
Quote:
Originally Posted by erkq View Post
I agree they're not bad. The one stock battery it came with is all I have right now and it flies very well on it. But I have some $12 Turnigy 45-90C's on order and I expect more powah! While E-flight batteries have become more serviceable lately almost anything else out-performs them at 1/2 to 1/3 the cost.
Oops, wrong thread. I thought I was in the 300x thread. But same point holds. I got the GensAce for this one.
RCG Plus Member
Old Sep 28, 2012, 01:12 PM
johnnyrocco123 is offline
Find More Posts by johnnyrocco123
You down with EPP?
johnnyrocco123's Avatar
Quote:
Originally Posted by epoweredrc View Post
The nanos are good so Far and cheap the glacier from epbuddy are good also
I got a 6 minute flight on a Glacier not trying to forgot to land when timer went off LOL.

I really think some do plan to crash, I myself have only "crashed" 130X when tail blew out.
I see the Glacier's are 450mah. Does the heli fly differently with these batts?
Old Sep 28, 2012, 01:13 PM
jasmine2501 is offline
Find More Posts by jasmine2501
Rocket Programmer
jasmine2501's Avatar
Quote:
Originally Posted by ssobol View Post
Don't know what radio you have, but there are various ways to get a back lit display on Spektrum radios that don't have them. There are turn key solutions as well as DIY. In one case the cost is ~10 bucks.
Also, I've had a radio with a backlight for a couple years now, and its not actually very useful except for running the battery down. I mean, how much radio programming do you do in the dark?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale New in the box E-Flite Taylorcraft ARF Kit plus High Performance E-Flite components Philscho Aircraft - Electric - Airplanes (FS/W) 4 Aug 19, 2012 01:25 AM
For Sale E-Flite 300 32e SHP ****SOLD*** E-Flite still aviable tomtheman Aircraft - Electric - Airplanes (FS/W) 2 Mar 28, 2012 09:01 PM
Sold E-flite 60A ESC w/ E-flite Brushless 1010kV Motor joshfneptune Aircraft - Electric - Power Systems (FS/W) 3 Mar 05, 2012 09:18 PM
Discussion E-Flite Taylorcraft 450 ARF Kit and High Power E-Flite electrical components $300 Philscho Hot Online Deals 1 Mar 02, 2012 09:11 PM
Discussion E-Flite Su-26 and E-flite Extra 260 repair Joe Slow Crash Discussion 1 Sep 27, 2011 12:50 PM