Thread Tools
Old Jul 08, 2012, 12:23 PM
skizziks is offline
Find More Posts by skizziks
Registered User
That is just part of torque tube Heli 101....First move the blades by hand to see if it moves freely...Spool up slowly and look for vibration...If there is any vibration remove all blades and hunt for the problem....
Sign up now
to remove ads between posts
Old Jul 08, 2012, 12:24 PM
volcomsnows2k is online now
Find More Posts by volcomsnows2k
Spicy Torque Roll!
volcomsnows2k's Avatar

Solution


The solution has been posted in post 1512 and previous somewhere. Your problem is exactly what happened to me. Expect mine was like 3 flights. I will do this when I get home.

Quote:
Originally Posted by marctrudeau View Post
I had about 6 flawless flights, when I got the uncontrolled piro. White rear crown gear is definitely slipping on the end of the torque rod. Rod appears too short, so insufficiently engaged (maybe half), and that half has rounded out.

Otherwise, this heli is awesome!

Anyone have a really solid fix for this issue?

Thanks,

Marc
RCG Plus Member
Old Jul 08, 2012, 12:27 PM
johnnyrocco123 is online now
Find More Posts by johnnyrocco123
You down with EPP?
johnnyrocco123's Avatar

Designated post for needed mods and trouble shoot


Can you guys designate a specific post for all needed mods and fixes???

That way, you can just forward dudes to that post.

Does this sound like a good idea? As more necessary mods and fixes come up, just add to the original post.
Old Jul 08, 2012, 12:27 PM
Z06 Tony is online now
Find More Posts by Z06 Tony
Z06 Tony's Avatar
Quote:
Originally Posted by volcomsnows2k View Post
I don't understand the tail vibes at all. It is violent! I am just kinda expecting to throw something off the heli one of these flights. On spool up before it gets to a good rpm range, it sounds and looks like the heli wants to explode!
Just spool it up fast and punch it and get it off the ground. I bet once you do it wont vibrate anymore. All that matters is does it vibrate in the air not on the ground.
Site Sponsor
Old Jul 08, 2012, 12:28 PM
volcomsnows2k is online now
Find More Posts by volcomsnows2k
Spicy Torque Roll!
volcomsnows2k's Avatar
Quote:
Originally Posted by johnnyrocco123 View Post
Can you guys designate a specific post for all needed mods and fixes???

That way, you can just forward dudes to that post.

Does this sound like a good idea? As more necessary mods and fixes come up, just add to the original post.

Maybe a Sticky common known issues?
RCG Plus Member
Old Jul 08, 2012, 12:30 PM
J_skaggs is offline
Find More Posts by J_skaggs
Registered User
Quote:
Originally Posted by KiTCyclic View Post
I got one new in the box that I picked up, still sealed. Can't decide should I open it and fly it or should I sell it???
So close yet, so far away. Open it.
Old Jul 08, 2012, 12:35 PM
J_skaggs is offline
Find More Posts by J_skaggs
Registered User
Quote:
Originally Posted by sertav View Post
I'm about to the point where I'll do that, too. I often do that anyway with helis I really like so I can always have a flying spare. Looks like I'll NEED one with the 130 X...
I will definitely buy a second 130x if a V2 version comes out that addresses most of the issues.
Old Jul 08, 2012, 12:58 PM
zadaw is offline
Find More Posts by zadaw
Quote:
Originally Posted by minirotor View Post
Shame Align & Raptor don't make this seize/type of Heli--just buy/fly no problems
Align built the Trex 100X FP which is one of the most heavily condemned micro helis ever. They then announced a Trex 100 3D which never materialized. It is actually much more complicated and requires much more investment to design and manufacture a 100-120 size micro. Henseleit is a very small operation but their helis are reckoned to be among the best ever made.

Anyway, I am unsubscribing from this thread. I just heard that the 130X won't be coming to Hong Kong anytime soon and it is possible it may never come. I am not going to buy overseas through the Internet.
Old Jul 08, 2012, 01:01 PM
TravisBean is offline
Find More Posts by TravisBean
Have Guitar Will Travel
TravisBean's Avatar
I see quite a bit of tail wag in this video. Are other owners experiencing the same thing ?

E-Flite Blade 130 X Demo Flight Raw and Uncut with Mild 3D Aerobatics (6 min 35 sec)
Last edited by TravisBean; Jul 08, 2012 at 01:18 PM. Reason: typo
Old Jul 08, 2012, 01:17 PM
foxrider68 is offline
Find More Posts by foxrider68
Registered User
Quote:
Originally Posted by lkagan View Post
Someone resolved this issues by loosening the screws that hold the tail boom and pushing the tail boom in just a bit more. Then there was no more fore and aft play with the torque tube. Good luck!
I just did it and it worked for me! Shaft goes to the end of the gear. However I started to strip the screws as they were tight with the junky screwdriver that came with it. Nothing substitutes good tools.
Old Jul 08, 2012, 01:20 PM
lkagan is offline
Find More Posts by lkagan
Registered User
lkagan's Avatar
Great to hear!
Old Jul 08, 2012, 01:33 PM
sertav is offline
Find More Posts by sertav
Suspended Account
Quote:
Originally Posted by johnnyrocco123 View Post
Geez, this can't be resolved through a setting?
What, a "setting" on the TX? Yeah, it would be nice to have a TX setting to eliminate vibes, but that ain't happening any time soon...
Old Jul 08, 2012, 01:35 PM
sertav is offline
Find More Posts by sertav
Suspended Account
Quote:
Originally Posted by zadaw View Post
Align built the Trex 100X FP which is one of the most heavily condemned micro helis ever.
A direct rip off of Blade's original flybarred mSR (one of their good ones) and Align STILL couldn't get it right.
Old Jul 08, 2012, 02:00 PM
marctrudeau is offline
Find More Posts by marctrudeau
Registered User
Quote:
Originally Posted by foxrider68 View Post
I just did it and it worked for me! Shaft goes to the end of the gear. However I started to strip the screws as they were tight with the junky screwdriver that came with it. Nothing substitutes good tools.
First, best BLADE-owner's investment is a decent "0" size Phillips screwdriver!
Old Jul 08, 2012, 02:09 PM
marctrudeau is offline
Find More Posts by marctrudeau
Registered User

Alternate piro solution


Quote:
Originally Posted by lkagan View Post
Someone resolved this issues by loosening the screws that hold the tail boom and pushing the tail boom in just a bit more. Then there was no more fore and aft play with the torque tube. Good luck!
Thanks, Ikagan!

There was no slop at either end of my boom, loosening all the screws, but I found that if I place a tool across the end of the front gear, I can push the back gear further on with my finger tips. I got about 1/2 mm moe engagement, and no more piros.

Tried my first roll, and put it in inverted under power. No damage, but had to push the gear home again. I wish the flat section at the aft end of the torque were a mm longer, but I can live with this. My only battery should be charged again soon.

Marc


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale New in the box E-Flite Taylorcraft ARF Kit plus High Performance E-Flite components Philscho Aircraft - Electric - Airplanes (FS/W) 4 Aug 19, 2012 01:25 AM
For Sale E-Flite 300 32e SHP ****SOLD*** E-Flite still aviable tomtheman Aircraft - Electric - Airplanes (FS/W) 2 Mar 28, 2012 09:01 PM
Sold E-flite 60A ESC w/ E-flite Brushless 1010kV Motor joshfneptune Aircraft - Electric - Power Systems (FS/W) 3 Mar 05, 2012 09:18 PM
Discussion E-Flite Taylorcraft 450 ARF Kit and High Power E-Flite electrical components $300 Philscho Hot Online Deals 1 Mar 02, 2012 09:11 PM
Discussion E-Flite Su-26 and E-flite Extra 260 repair Joe Slow Crash Discussion 1 Sep 27, 2011 12:50 PM