Ceres w/ kst servos - Page 4 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 03, 2012, 02:33 PM
Silent Flight
Twyl's Avatar
Quote:
Originally Posted by target
Most guys that are trying out for the team and are serious won't be taking video; they'll be watching what others are doing, deciding what works, and what amount of ballast to run....
Since I'm not trying out for the team, and since I'm not such a serious person , I took some video. Of course even if I was a serious person, which I'm not of course , I think I would have taken the video anyways just to help a friend out.

Something also tells me that there are probably a ton of very serious people out there who probably wouldn't even consider NOT video taping a known expert or rival. Something to do with being able dissect the process even more thoroughly over and over again at home. Kind of like watching p0rn.

Anyways, back on topic! Nice flying Sam and thanks a ton for the help with fine tuning the settings on my ESO. Best of luck Friday and Saturday!

Sams New Ceres with KST servos (2 min 33 sec)


-Jonathan
Sign up now
to remove ads between posts
May 03, 2012, 02:43 PM
Acacia II Lunar Lander
RCRod's Avatar
Looks pretty sweet, Sam... Nice and smooth!

Thanks for posting the video, Jonathan!
May 03, 2012, 10:07 PM
building season is here.
seaspb's Avatar
Thanks Jonathan, I heard you were back at the slope again. Come out Sunday if you can. I don't know it team select will be over with, but if it is we can fly.

Sam
May 04, 2012, 12:35 AM
Silent Flight
Twyl's Avatar
Any time Sam. Yeah I was the first there today around 1:00pm and had the sky to myself for about 15min until others started to show up. I flew for another 15 then booked it back to the day job

I'll swing by tomorrow too probably just to check things out. Sunday I'm out as there's a birthday party I have to go to, but I appreciate the offer.

-Jonathan
May 07, 2012, 05:57 AM
Registered User
Hey Sam,

nice one !

Can you post your Settings ? CG etc ?

Greetings
Tom
Last edited by freerider_tom; May 08, 2012 at 01:21 AM. Reason: too blind to see
May 07, 2012, 09:35 AM
Registered User
I always liked the raw pace the ceres has !
Looks like this one is well tuned, and the place your flying it at looks really nice too.

Whats the landing zone like ?
May 07, 2012, 09:53 AM
building season is here.
seaspb's Avatar
Landing zone is great, getting to it kinda challenging. Need to cross a 3 lane street, hop a fence and then a short walk up a decent hill. All while flying, but once you've done it like 10 times it's butter.

C of G at 108mm from leading edge. elevator has 5mm of travel from center in up or down travel. Ailerons are set to taste.
May 07, 2012, 10:13 AM
F3B
satinet's Avatar
nice scheme btw.

I used KST servos in my latest build. hope they work out okay.
May 07, 2012, 10:26 AM
building season is here.
seaspb's Avatar
Thanks, so far so good for me.

Next f3f season I will hope to assemble two PP's with kst's.

Sam
May 07, 2012, 10:31 AM
Registered User
the lz sounds like landing at the wrecker in wales.

Nice coastal site there

Glad you like the ceres there a fast model.

Ballast is your friend with the ceres, it can take it !

J
May 07, 2012, 01:12 PM
Eagle Butte User
PDX Slope Pilot's Avatar
Quote:
Originally Posted by seaspb
Landing zone is great, getting to it kinda challenging. Need to cross a 3 lane street, hop a fence and then a short walk up a decent hill. All while flying, but once you've done it like 10 times it's butter.

C of G at 108mm from leading edge. elevator has 5mm of travel from center in up or down travel. Ailerons are set to taste.
Do you recall where your snap flap setting end up at that CG?
May 07, 2012, 01:56 PM
building season is here.
seaspb's Avatar
Depending on conditions,
6mm of flap to 5mm of elevator or
5 with 6
I could run more but this set up is damn near flick proof.
May 07, 2012, 02:06 PM
Eagle Butte User
PDX Slope Pilot's Avatar
Thanks Sam... I'm switching my Ceres over to 2.4 so need to dial it in again.
May 09, 2012, 10:25 PM
building season is here.
seaspb's Avatar
For those that want to know,
-servo centering is good
-servo speed is good,I can't tell between the more expensive servo set up on my other Ceres
-I have about 4 hours of testing, living room flying and model set up
-1:30 hour actual air time in a different conditions and ballast, I've even had it where the model is at 110oz's and landed on a bush and flaps and ailerons are holding onto foliage an still holding trim input, buzzing (normal) but holding.
-these servos are thirsty, I do leave model on for extended periods.
-Model is flying great

Sam
May 11, 2012, 02:53 AM
Registered User
about the KST, be very careful if they sart to get sloppy: on my predator it started to happen and the reason for it was the servo screws that started to unscrew. I guess the constant buzzing generates vibration that ends up like this. don't hesitate using Loctite before using the servos.

Cedric,


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product KST DS115 and DS125 billet servos - $25.99 Rotozuk Hot Online Deals 2 Aug 23, 2014 08:01 PM
Discussion d40 servos and KST servos wdeighton Dynamic Soaring 22 Jun 10, 2012 02:51 PM
Off Site *** Sky Angels Aircraft - Sailplanes (FS/W) 0 Apr 06, 2012 08:34 AM