Thread Tools
Apr 08, 2012, 08:18 PM
WOS
WOS
Registered User
Discussion

How long to learn 3D?


Curious! How long did it take YOU to learn the crazy 3D flying? How much money did it take in parts for you TO learn 3D?
Sign up now
to remove ads between posts
Apr 08, 2012, 08:34 PM
Registered User
The crazy 3D stuffs - never stop learning. Cost - in the neighborhood of $10K+ conservatively. This hobby is expensive.
Apr 09, 2012, 01:34 PM
CP heli ≠ 3D heli
Gedexas's Avatar
Quote:
Originally Posted by WOS
Curious! How long did it take YOU to learn the crazy 3D flying?
Still learning, will be nine months now.

Quote:
How much money did it take in parts for you TO learn 3D?
$140 for the mCPx, another $120 for the radio and maybe $100 in parts so far.
Apr 09, 2012, 10:42 PM
Registered User
... and now I'm into balsa 3D planes (bought 5 planes in less than two months) ... I need to win the lottery or find me a suggggggar mama!
Apr 10, 2012, 01:22 AM
Registered User
I have been learning (on sim) for more than a year
still i cant even do inverted hover .. always get the direction wrong..

I guess some people are fast learner
some are slow learner (like me)
Apr 10, 2012, 01:29 AM
Oops!
beevous80002's Avatar
Me too! If I'm inverted, it wasn't me! My friend has been flying for @ 1 year and I can't hardly tell if he is right side up or what! I don't know if I would call it "3-D" or not though, It flips and flops so much it might just be luck that keeps it in the air.
Apr 10, 2012, 06:35 AM
WOS
WOS
Registered User
Quote:
Originally Posted by beevous80002
Me too! If I'm inverted, it wasn't me! My friend has been flying for @ 1 year and I can't hardly tell if he is right side up or what! I don't know if I would call it "3-D" or not though, It flips and flops so much it might just be luck that keeps it in the air.
LOL!
Sounds like something I would do! The HOLY CRAP scenario!
Apr 10, 2012, 09:45 AM
Sussex, UK
RobinBennett's Avatar
I think I got to loops, flips and rolls (all basically the same thing) in about 6 months, then I stalled for a few years because I was scared of crashing.

Then I got an mCP-X and learnt inverted hovering and circuits in about a year.

I only fly a few batteries per week and do little or no sim practice - people who learn proper 3D do a lot more practice.
Apr 10, 2012, 10:46 AM
It took nearly $5000 to learn flips, rolls, loops, inverted hovering and a little inverted flight. I made a lot of mistakes in terms of maintenance which was responsible for most of the expense. I used 4*MCPx, 2*Genius CP, and 3*V120D02S. I started in June with the MCPx but just couldn't get anywhere with it and the Genius CP. Things only got moving in mid-November with the V120D02S. Now I am flying the MCPx and V120D02S, I still can't get the Genius to work properly.

Among the horrors I encountered were 3 smoked MCPx boards, 3 smoked Genius boards, and 6 smoked V120D02S boards. Most of which were due to poor maintenance on my part. Also, I did not understand the importance of the state of the motor and batteries then. Flips were easy but it took months on the SIM before I could do inverted hovering. The more time you spend on the SIM, the less expense you will have in real life. But still, flips are very unpredictable between different helis.
Apr 10, 2012, 02:14 PM
Registered User
One of the local kids, who's now a sponsored pilot, would come into the shop during the day (no crowd) and would spent up to 6 hours flying the sim. He worn out two realflight transmitters.

Here he's about a year later. This is an old video when flybar was still raging.

VINNY - TREX 700N - 3D RC HELICOPTER - CLIP # 2 (7 min 23 sec)
Apr 11, 2012, 04:23 AM
Registered User
While I appreciate the skill involved in flying 3d and that to some people its the holy grail as it were, it's not for me.
As to your question I don't think there will be a definiative answer to your question as different people take different times to learn.... for example my stepson (12yrs old) can fly the ass off my MSR much better than I can and he has had maybe a tenth of the stick time I have.
Apr 11, 2012, 11:27 AM
Rocket Programmer
jasmine2501's Avatar
Quote:
Originally Posted by WOS
Curious! How long did it take YOU to learn the crazy 3D flying? How much money did it take in parts for you TO learn 3D?
You will never learn 3D - it will take all your money and all your time and you still won't know it. That's the beauty of it - you will never exhaust everything you can learn. When you think you know all the moves, you probably don't, and you can invent new ones.

To learn the basic maneuvers it took me about a year of flying and maybe $1000 investment... but over the years, $10K is probably more accurate.
Dec 28, 2014, 09:10 PM
Registered User
This is for essex2visuvesi, I just stared with 3d flying, and i been flying for 2 years now and thought it would be easy .lol...then I got out of that dream, I went through 3 planes around $250 on up then I got a flight simulator calley phoenix r/c 4 and it help so much,if you master the simulator,then I would try the real deal,but the simulation won't make you a pro at there real Thang .I got the simulator for $140 and it's worth it
Dec 29, 2014, 12:27 AM
Registered User
sprint11's Avatar
Been flying little over a year now. Can 3d on sim but not real thing yet. I want to get real good and smooth on basic flying first than will start 3d training. Even regular flying cost money lol.
Dec 29, 2014, 10:02 AM
Registered User
bcredneck's Avatar
I did my first inverted hover the first day i flew a CP heli but thats after over 60hrs of sim time with the speed at 115% of real time (sim helis move to slow). But i just cant do a tic toc not even one with out crashing.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question How did they learn 3D before sims? Nomad57 Simulators 4 Oct 19, 2011 06:10 AM
Discussion How long did it take you to learn your Walkera4#3B? composit Micro Helis 86 Jun 20, 2009 02:50 PM
Discussion How long did it take for you to learn to fly? Paul6ppca Coaxial Helicopters 13 Dec 21, 2006 04:42 PM
Discussion How long took you to learn nose-in hover.. Discusman Micro Helis 21 Sep 20, 2006 08:45 AM
How long to learn 3D? sports96 3D Flying 5 Aug 19, 2004 06:25 PM