need help with my banana hobbies cub 1400mm span - RC Groups
Thread Tools
Apr 08, 2012, 07:19 AM
Registered User

need help with my banana hobbies cub 1400mm span

hi there,
after a very long absence from RC, I am getting back into flying. When I flew before it was easy to plug in the servo's as they only fitted one way.
I bought a cub, but nowhere does it tell me which way round the servo plugs fit into the receiver, is it with the leads going away from the receiver or is it with the leads going back over the receiver body, if anyone has one could they help a noob who doesn't want to fry anything,the receiver is a "Topfire6"
thanking you in advance,
Last edited by skyvanman; Apr 08, 2012 at 10:22 AM.
Sign up now
to remove ads between posts
Apr 08, 2012, 07:58 AM
Boogie_'s Avatar
You won't fry anything if you plug in the servos wrong.
Plug them in and try to move them with the Tx, if they don't work flip the plug over.
Apr 08, 2012, 08:05 AM
Registered User
Thank you very much boogie,maybe have her in the air this evening.
regards Richard.
Apr 08, 2012, 03:52 PM
Registered User

receiver wire

you will notice a + ...some king of circle.....-) if the wire is a black one put that to the "-" red and brown to the "+"

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Hobby King - Piper J3 Cub 1400mm - Alternate Source? itsme2 Scale Kit/Scratch Built 3 Oct 26, 2012 11:29 AM
Discussion need help flying my piper cub LikeARock Beginner Training Area (Aircraft-Electric) 20 Apr 26, 2012 07:11 PM
Careful! My 1st real issue with Banana Hobby... TxToast Banana Hobby 1 Dec 31, 2011 10:17 AM
Discussion Need some help here with an 80 inch wing span Cub Vyceroy Scale Kit/Scratch Built 3 Jan 28, 2008 07:31 PM