Thread Tools
Old Apr 07, 2012, 10:16 AM
lazy-b is offline
Find More Posts by lazy-b
Registered User
Discussion

look Ma......no more Antenna on my DX-7......


Guys,

I hate those small 2.4 GHZ on top of my Transmitter, Specially all those Spektrum and JR Radio, cause the Spektrum and JR Transmitter have a very long Antenna, that I have difficulty storing on my Flight Box.

here is my solution, I just remove the Antenna and put it inside the Transmitter......you can easily convert it to its original looks, just incase you want to Sell it.

I hope I can do the same convertion for my other 2.4 Ghz transmitter.
Sign up now
to remove ads between posts
Old Apr 07, 2012, 02:48 PM
AndyKunz is offline
Find More Posts by AndyKunz
AndyKunz's Avatar
That's not a very good idea. You just clobbered your range and created a very poor pattern.

They put them up like that for several reasons. It's not for aesthetics.

Andy
Site Sponsor
Old Apr 07, 2012, 04:23 PM
WiseDuck is offline
Find More Posts by WiseDuck
Mmmmmmm!
WiseDuck's Avatar
Maybe he's into parkflyers? :P Never thought anyone would say "gosh, what a bothersome thing, this ANTENNA on this TRANSMITTER, let's get it out of sight"..
Old Apr 07, 2012, 05:15 PM
Telrin is online now
Find More Posts by Telrin
Registered User
Clearly someone who never flew with 35/72MHz
Old Apr 07, 2012, 05:17 PM
SIRCOL is offline
Find More Posts by SIRCOL
Old and grumpy
SIRCOL's Avatar
Quote:
Originally Posted by lazy-b View Post
Guys,

I have difficulty storing on my Flight Box.

here is my solution, I just remove the Antenna and put it inside the Transmitter.
here is my solution put it back where it belongs
get a bigger flight box
or a transmitter case
Old Apr 07, 2012, 10:03 PM
ivanc is offline
Find More Posts by ivanc
S.A.D. member
ivanc's Avatar
I did a similar mod over a year ago and have not seen any range reduction.

Not a Spektrum radio but a Spektrum module and antenna :













Ivan
Old Apr 08, 2012, 05:17 AM
bossee is offline
Find More Posts by bossee
Bo Edström, Sweden
Hi lazy-b,

Did You make a full range test before and after the antenna modification?
So You know if the modification You did have any negative effect on the range.

/Bo
Old Apr 09, 2012, 11:16 AM
lazy-b is offline
Find More Posts by lazy-b
Registered User
I have not performed a Ranges Test, But I guess, it would have the same performace.......my next plan is to use an 2.4 GHZ Spektrum Analyzer to measure its Signal Strength, while the Transmitter is about 500 to 1Km away. and make a signal Strenght Reading on Each Position:
1. Few Inch away from Transmitter Base
2. at the Transmitter Base
3. inside the transmitter

any way, range is not an issue for me, cause I only use it to fly my MCPX helicopter.
Old Aug 24, 2015, 04:09 AM
michaelpowell is offline
Find More Posts by michaelpowell
Registered User

Not a problem


These plastic cased transmitters won't attenuate the signal greatly, so the antenna can go inside easily enough, and I have a commercial transmitter built that way that gives remarkable range.

They put the antenna out in the open for old-times-sake, to avoid the old folk brought up on extended poles sticking out of the top from feeling lost. Besides, if they converted a transmitter, they needed something out there to balance the weight.

Have you noticed, cellphones had long antennas, but they have been incorporated into the case, either as a strip along the edge or, as with laptop computers, an internal antenna under the plastic case.

It's not a problem, really.
Old Aug 24, 2015, 05:11 AM
mrcl is offline
Find More Posts by mrcl
Registered User
Quote:
Originally Posted by michaelpowell View Post
These plastic cased transmitters won't attenuate the signal greatly, so the antenna can go inside easily enough, and I have a commercial transmitter built that way that gives remarkable range.

They put the antenna out in the open for old-times-sake, to avoid the old folk brought up on extended poles sticking out of the top from feeling lost. Besides, if they converted a transmitter, they needed something out there to balance the weight.

Have you noticed, cellphones had long antennas, but they have been incorporated into the case, either as a strip along the edge or, as with laptop computers, an internal antenna under the plastic case.

It's not a problem, really.
Uuuuh if you say so...
Old Aug 24, 2015, 06:20 AM
srnet is online now
Find More Posts by srnet
Stuart
srnet's Avatar
Quote:
Originally Posted by michaelpowell View Post
These plastic cased transmitters won't attenuate the signal greatly, so the antenna can go inside easily enough, and I have a commercial transmitter built that way that gives remarkable range.
Thats a diiferent radio, does not mean it applies to all radios of course.

Spektrum would have tested the radio and its range with the antenna in the expected position.

You would need to do before and after range tests to evaluate the actual range diffence, but you might expect that bringing the antenna closer to the metal parts in the TX would actually reduce range.
Old Aug 24, 2015, 06:21 AM
freechip is offline
Find More Posts by freechip
Surface, Air & Water Rc Toys..
freechip's Avatar
way to bring back a 3 1/2 yrs old thread..
Old Aug 24, 2015, 11:50 AM
AndyKunz is offline
Find More Posts by AndyKunz
AndyKunz's Avatar
The plastic housing DOES affect the frequency and transmission characteristics.

Andy
Site Sponsor
Old Aug 24, 2015, 12:55 PM
Dave H. is offline
Find More Posts by Dave H.
Registered User
I think the design goals for laptops and cell phones are largely influenced by fashion and usability (ie: sliding into a pocket or purse) and you may recall that one recent phone had to be held in a certain way for its antenna to work well. RC TXs surely have some fashion influence but one would hope that performance wins. In the OP's case, it was probably fine since he probably never flies his MCPX more than a hundred feet away. Besides, if it crashes, it probably doesn't hurt anyone or itself.

Now (as noted: 3+ years later!) his most active topic is a totally different transmitter - which also has an antenna sticking out the top. I wonder if he made the same mod.
Old Aug 24, 2015, 02:34 PM
ivanc is offline
Find More Posts by ivanc
S.A.D. member
ivanc's Avatar
My 9C internal antenna installation did not show any noticeable degradation in range and I've flown larger planes (one of which has 110" WS) within visual range without issues. When doing range tests I never noticed reduced range before and after the antenna installation change.

I agree that the plastic housing affects the transmission characteristics, what I am saying is that in my case I did not notice it. I do not fly FPV/beyond visual range/behind obstacles so can not comment on whether external vs. internal antenna installation significantly changes range.

Now I no longer use the 9C for flying as I upgraded to a different transmitter with a very compact external antenna and without external wiring to it so the antenna location and size does not bother me.

Ivan


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Careful! RESOLVED: Wrong plane shipped: No more live chat, no more support. Seriously? Roswalt Banana Hobby 33 May 16, 2012 01:36 PM
Question Can SPEKTRUM DX-7 or DX-6 stop my heart? no joke Fuzzbuster Radios 59 Oct 21, 2007 05:08 PM
Look Ma!! No (visible) brake!! My latest winch... rogerflies Thermal 20 Dec 18, 2005 12:42 PM
Micro fan ala Haldor (aka look ma no wires) dave morris Electric Ducted Fan Jet Talk 7 Mar 28, 2003 07:25 AM
Look Ma! No Pieces! E-Minn Parkflyers 3 Mar 31, 2002 11:56 PM