Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Feb 01, 2013, 05:27 PM
aeajr is offline
Find More Posts by aeajr
Proud member of LISF and ESL
Quote:
Originally Posted by dvogonen View Post
It is a construction flaw. All radios have got it. But most people never see it since they don't use the radio in the cold.
My guess is that HobbyKing sells the current production run and then quietly fixes the next batch of radios. A recall would be way too expensive. If you want the issue fixed, you better fix it yourself.
But do register a complaint. Just don't expect any feedback. I registered a complaint about sticking buttons some time ago and it seems firmly stuck in limbo. They will not answer or even assign it to anyone. The report is "waiting to be assigned". My guess is that the wait will be eternal :-)
If no one complains they likely won't fix it.
Sign up now
to remove ads between posts
Old Feb 01, 2013, 07:43 PM
xxxcellarator is offline
Find More Posts by xxxcellarator
Registered User
xxxcellarator's Avatar
Quote:
Originally Posted by xxxcellarator View Post
I just ordered a set of those switches. And looks like one other person did too, as there were 8 available, now there's only 6 left.

Thanks for the video and finding out the ideal switches dvogonen!

By the way, I'm quite sure one of the reasons they went with the silicone switches was because there were a whole bunch of morons that complained about the 9Xs "noisy buttons". I clearly remember reading a number of posts in the 9X threads with complaints like that. Nimwits!
Quote:
Originally Posted by kyalamikid View Post
My review of the 9XR... I have 2 x 9x for the past 2 years, both running ER9X with telemetry

1. Hated buttons on 9x as they were too loud and clicky. 9XR buttons are way better, a lot quieter and prefer the feel.
2. Hated the position of the neck loop hook on 9x, made the bottom heavy, and was awkward to carry on neck loop. 9XR is better balanced and hangs level.
3. Not crazy about looks of 9X, I prefer 9XR, but that's subjective.
4. The screen on the 9XR is better than the 9X, clearer and easier to read.
5. Prefer Gimbals on 9XR, the 9X was a little spongy towards outer travel, 9XR is very smooth.
6. Switches feel slightly better on 9XR, but not greatly.
7. 9X had wires connecting to the back board, the board is built into the front on 9XR. Much easier and quicker to FrSky telemetry mod, and less wiring/connectors needed.
8. Love the fact that half the mods I need are already done.
9. I have telemetry mod and haptic off buzzer circuit, and there is still plenty of space. If you need more then the right end of the battery bay can be clipped off and used. This leaves a lot of space for sound mod or future mods.
10. The main board on 9XR is cleaner and looks better quality IMO.

Overall there is nothing I prefer on the 9X. The only mod I did to improve the stock unit is hot glue the gimbal connector. Didnt need anything else.

I have followed this thread and was worried about the number of negative comments, but couldn't be happier!!
Found one!
Old Feb 01, 2013, 08:25 PM
phil alvirez is offline
Find More Posts by phil alvirez
Registered User

connectors pins too loose


opened it and checked gimbals.
i noticed that when moving the sticks up and down, the tiny pins that are inserted into the plugs move in their housing. this happens on both (throttle and elevator), no matter if the throttle wires are very short and the others are not: in both, these pins move a little in their housing. i am afraid that with use they may make a false contact, or the wires may break.
i added some welders glue (the transparent that dries hard), but i wish that could be a source for an extension (male at 1 end, female at the other) so we could insert it and make sort of a loop to relieve stress and wear.
any link?
i recall in my days of indoor micros that there is a supplier who sells all kinds of connectors. i will search in my files and if i find him i will order some and bring his address here.
or maybe some1 knows the link for them at hk?
Last edited by phil alvirez; Feb 01, 2013 at 09:36 PM.
Old Feb 01, 2013, 08:53 PM
marhar is offline
Find More Posts by marhar
Mark Harrison
Quote:
Originally Posted by aeajr View Post
If no one complains they likely won't fix it.
My theory is that they watch RCG threads to get the information, but don't participate coz the resulting flame wars would be counterproductive for them. This is their beta testing forum, after all!
Old Feb 01, 2013, 09:18 PM
LowThudd is offline
Find More Posts by LowThudd
Registered User
Quote:
Originally Posted by phil alvirez View Post
opened it and checked gimbals.
i noticed that when moving the sticks up and down, the tiny pins that are inserted into the plugs move in their housing. this happens on both (throttle and elevator), no matter if the throttle wires are very short and the others are not: in both, these pins move a little in their housing. i am afraid that with use they may make a false contact, or the wires may break.
i added some welders glue (the transparent that dries hard), but i wish that could be a source for an extension (male at 1 end, female at the other) so we could insert it and make sort of a loop to relieve stress and wear.
any link?
i recall in my days of indoor micros that there is a supplier who sells all kinds of connectors. i will search in my files and if i find him i will order some and bring his address here.
or maybe some1 knows the link for them at hk?
This has been fixed with hot glue by others.
Old Feb 01, 2013, 09:35 PM
phil alvirez is offline
Find More Posts by phil alvirez
Registered User

extension


Quote:
Originally Posted by LowThudd View Post
This has been fixed with hot glue by others.
i already fixed it, as i said in the post.
my concern is the wires that stress too much and that's why am trying to find an extension.
what am asking is a link for the extension.

that is the kind of comment that i need to hear.
Old Feb 02, 2013, 01:11 AM
kyalamikid is offline
Find More Posts by kyalamikid
Registered User
kyalamikid's Avatar
Quote:
Originally Posted by xxxcellarator View Post
Found one!
Nope, never posted on 9XForums about this .... But happy to be a moron if that's all it takes.
Old Feb 02, 2013, 03:34 AM
xxxcellarator is offline
Find More Posts by xxxcellarator
Registered User
xxxcellarator's Avatar
Quote:
Originally Posted by kyalamikid View Post
Nope, never posted on 9XForums about this .... But happy to be a moron if that's all it takes.
lol I'm just busting your chops.

But seriously, cmon, how can you say something is "too loud, too clicky", when it's perfectly functional though. The 9XRs buttons are NOT!! not by a long shot. They get stuck (for some even in the warm, for all in the cold), they require extra hard pressing (for some it even activates multiple buttons), provide no feedback at all aside from what is happening on screen and most likely won't last nearly as long.

So yeah, you really prefer the buttons that arent so functional but quiet? Only issue I had was the sticky buttons in the cold, and that was more than enough for me to say screw this.
Old Feb 02, 2013, 04:22 AM
KC is offline
KC
Find More Posts by KC
KC
Registered Loiterer.
KC's Avatar
The 9x button noise can be muffled quite effectively with a piece of foam (spongy type) placed over the buttons on the PCB with the tops of the buttons pocking through. The original sharp Clickety, Click sound becomes more of a low tone Clackety, Clack! The muffled sound is quite satisfying.

KC
Old Feb 02, 2013, 06:27 AM
phil alvirez is offline
Find More Posts by phil alvirez
Registered User

source for extension


regarding my post 5043 about an extension:
connectors pins too loose
opened it and checked gimbals.
i noticed that when moving the sticks up and down, the tiny pins that are inserted into the plugs move in their housing. this happens on both (throttle and elevator), no matter if the throttle wires are very short and the others are not: in both, these pins move a little in their housing. i am afraid that with use they may make a false contact, or the wires may break.
i added some welders glue (the transparent that dries hard), but i wish that could be a source for an extension (male at 1 end, female at the other) so we could insert it and make sort of a loop to relieve stress and wear.
any link?
ideally if some1 knows the link for them at hk?

i found 1 supplier. it is: rc-connectors.com
he has a large assortment. the problem is, which 1 is what we need?
how we can determine the type, size?
Old Feb 02, 2013, 06:33 AM
Sansha999 is offline
Find More Posts by Sansha999
Registered User
Am I the only one with R73 missing?
Old Feb 02, 2013, 07:18 AM
kyalamikid is offline
Find More Posts by kyalamikid
Registered User
kyalamikid's Avatar
Quote:
Originally Posted by xxxcellarator View Post
lol I'm just busting your chops.
I know, I was busting em back
Quote:
Originally Posted by xxxcellarator View Post
But seriously, cmon, how can you say something is "too loud, too clicky", when it's perfectly functional though. The 9XRs buttons are NOT!! not by a long shot. They get stuck (for some even in the warm, for all in the cold), they require extra hard pressing (for some it even activates multiple buttons), provide no feedback at all aside from what is happening on screen and most likely won't last nearly as long.

So yeah, you really prefer the buttons that arent so functional but quiet? Only issue I had was the sticky buttons in the cold, and that was more than enough for me to say screw this.
I dont seem to be the only one who finds the buttons on 9X annoying. 9XR arent great, but I prefer them of the 2. They are perfectly functional to me. I have ordered a set of the Chinese buttons just in case they do go south. I use Companion9X for complex setups anyway...

Personally I really think that there is too much negativity around the radio, which may scare some people off what, to me at least, is the best bang for the buck on the market.

I have the 9X, and don't use them anymore... Each to their own.
Old Feb 02, 2013, 08:10 AM
martinlmtl is offline
Find More Posts by martinlmtl
Registered User
Quote:
Originally Posted by phil alvirez View Post
regarding my post 5043 about an extension:
connectors pins too loose
opened it and checked gimbals.
i noticed that when moving the sticks up and down, the tiny pins that are inserted into the plugs move in their housing. this happens on both (throttle and elevator), no matter if the throttle wires are very short and the others are not: in both, these pins move a little in their housing. i am afraid that with use they may make a false contact, or the wires may break.
i added some welders glue (the transparent that dries hard), but i wish that could be a source for an extension (male at 1 end, female at the other) so we could insert it and make sort of a loop to relieve stress and wear.
any link?
ideally if some1 knows the link for them at hk?

i found 1 supplier. it is: rc-connectors.com
he has a large assortment. the problem is, which 1 is what we need?
how we can determine the type, size?
Please keep me informed if you find an extension or new longer wire. I temporarily repaired this problem with a tie wrap but I'm sure finding an extension or a longer wire is necessary to be sure something won't go wrong while flying.
Old Feb 02, 2013, 10:55 AM
oopsicrashed is offline
Find More Posts by oopsicrashed
oops i crashed
Hi everyone, I just received my turnigy 9xr. I have gotten lucky with many of the reported "major" problems. Although I cant fit my FrSky DJT module in the back. I know this is a reported problem and all I need to do is bend the pins slightly. Can someone tell me what page on this forum the problem was addressed, or how and what direction I should bend the pins. This forum has made me learn my new radio a lot more than i could of with the manual before even getting it!! keep up the good work guys.

Thanks in advance

Dave
Old Feb 02, 2013, 11:22 AM
nebstress is online now
Find More Posts by nebstress
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by oopsicrashed View Post
Hi everyone, I just received my turnigy 9xr. I have gotten lucky with many of the reported "major" problems. Although I cant fit my FrSky DJT module in the back. I know this is a reported problem and all I need to do is bend the pins slightly. Can someone tell me what page on this forum the problem was addressed, or how and what direction I should bend the pins. This forum has made me learn my new radio a lot more than i could of with the manual before even getting it!! keep up the good work guys.

Thanks in advance

Dave
You should bend the pins in the direction that will let the module fit properly

Line up the module with the module bay & you will be able to see which way you need to bend the pins.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Gens Ace, Turnigy, Turnigy Nano-Tech Sky lipo, etc. What's Your Preference? jlloyd1995 Batteries and Chargers 133 May 14, 2015 11:53 PM
Sold 2 turnigy motors 2 turnigy esc's crashnburn69 Aircraft - Electric - Power Systems (FS/W) 4 Oct 13, 2012 12:05 PM
For Sale Turnigy 2x 3s 1000 mah and 2s 1000 mah and Turnigy 2s/3s Lipo charger. Falconpunch Aircraft - Electric - Batteries & Chargers (FS/W) 1 Mar 18, 2012 10:47 PM
Discussion Turnigy or Turnigy Nanotech lawguy14 Batteries and Chargers 4 Mar 15, 2012 09:48 AM