Turnigy 9XR - Page 226 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jan 05, 2013, 08:52 PM
hjukhjuk
gooby's Avatar
Quote:
Originally Posted by jhsa
What about if they'd find out it wasn't reliable?? just speculating of course
No!
Sign up now
to remove ads between posts
Jan 05, 2013, 08:56 PM
The Big Kahuna of Foam.
bkahuna's Avatar
Quote:
Originally Posted by ChrisJ800
Has anyone properly identified the aerial connector yet so we can see if it is a common industrial connector, to reassure jhsa?
I'm pretty sure it is a MCX connector. I'll know soon as I order one and it should be here in couple of days.
Jan 05, 2013, 08:56 PM
Registered User
Quote:
Originally Posted by kovs
I wonder if it's possible to power fatshark goggles using the futaba port.
Can confirm you can. Powered my Attitude SD from the Futaba trainer port.
Jan 05, 2013, 08:56 PM
FPV in Hawaii
iskess's Avatar
Quote:
Originally Posted by Yihaaa
After recieving my 9XR today I immediately flashed it with Open9X. Works perfect!
What are my options for getting the USB programming tool needed for installing ER9X? I see one at HK, it that the only option, or is there one that works from eBay. HK shipping takes too long.
Jan 05, 2013, 08:57 PM
hjukhjuk
gooby's Avatar
Quote:
Originally Posted by dinislam1395
Can confirm you can. Powered my Attitude SD from the Futaba trainer port.
Where did you get the cable or did you make it yourself? I looked on readymaderc, but I didn't find anything.
Jan 05, 2013, 09:25 PM
Registered User
The cable came with the Fatshark. One end futaba square and the other end I think a DIN type connector.

http://www.readymaderc.com/store/ind...roducts_id=724
Jan 05, 2013, 09:26 PM
Advanced Monkey
nebstress's Avatar
Quote:
Originally Posted by Yihaaa
Do you have a link for me where to buy such an antenna cable?
Already posted the link twice, if you can't find that then Google is your friend
Jan 05, 2013, 09:47 PM
Warbird Fanatic
jchtr3a's Avatar
Read in the HK discussion area on the Mode 2 9XR that "several" have been received with the plastic case cracked. Haven't heard anything like that on this thread. Perhaps just someone trying to cause a stir.
Jan 05, 2013, 09:48 PM
hjukhjuk
gooby's Avatar
Quote:
Originally Posted by dinislam1395
The cable came with the Fatshark. One end futaba square and the other end I think a DIN type connector.

http://www.readymaderc.com/store/ind...roducts_id=724
I have the older fatsharks with a barrel type connector so this won't work.
Jan 05, 2013, 10:01 PM
Youtube Johnbrum26
Quote:
Originally Posted by kovs
I have the older fatsharks with a barrel type connector so this won't work.
Is it the head tracker cable?
Jan 05, 2013, 10:21 PM
'FPV'er...not a "LOS'er
Vantasstic's Avatar
Quote:
Originally Posted by iskess
What are my options for getting the USB programming tool needed for installing ER9X? I see one at HK, it that the only option, or is there one that works from eBay. HK shipping takes too long.
Did you get your f-ugly 9XR already? Got a lnk to the HK one? I may have cables to d/l already...if I can find out what cable is needed and if you're making it this way anytime soon.
Jan 05, 2013, 10:23 PM
Registered User

charging the 3 cells lipo


so i can use any 3 cells lipo-as long as it fits and the plug matches-and remove to charge as i do with all my lipos, with my balance-charger?
Jan 05, 2013, 10:25 PM
I don't want to "Switch Now"
pmackenzie's Avatar
Quote:
Originally Posted by iskess
What are my options for getting the USB programming tool needed for installing ER9X? I see one at HK, it that the only option, or is there one that works from eBay. HK shipping takes too long.
There are lots on Ebay, but you will need one that has a 6 pin header and most of them have 10 pin.

I found this one that should work which includes a 10 to 6 converter.

http://www.ebay.com/itm/USBASP-USBIS...item2a2343fe9a

Pat MacKenzie
Jan 05, 2013, 10:27 PM
hjukhjuk
gooby's Avatar
Quote:
Originally Posted by phil alvirez
so i can use any 3 cells lipo-as long as it fits and the plug matches-and remove to charge as i do with all my lipos, with my balance-charger?
Yes.
Jan 05, 2013, 10:37 PM
hjukhjuk
gooby's Avatar
Is there any way to use the 9x with original firmware with the 9XR as a trainer (or the other way round)?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Gens Ace, Turnigy, Turnigy Nano-Tech Sky lipo, etc. What's Your Preference? jlloyd1995 Batteries and Chargers 133 May 14, 2015 11:53 PM
Sold 2 turnigy motors 2 turnigy esc's crashnburn69 Aircraft - Electric - Power Systems (FS/W) 4 Oct 13, 2012 12:05 PM
For Sale Turnigy 2x 3s 1000 mah and 2s 1000 mah and Turnigy 2s/3s Lipo charger. Falconpunch Aircraft - Electric - Batteries & Chargers (FS/W) 1 Mar 18, 2012 10:47 PM
Discussion Turnigy or Turnigy Nanotech lawguy14 Batteries and Chargers 4 Mar 15, 2012 09:48 AM