Can "IT" be done... configure Forward and Reverse on a hobbyking brushed ESC - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Apr 06, 2012, 05:25 PM
Registered User
fly_right's Avatar

Can "IT" be done... configure Forward and Reverse on a hobbyking brushed ESC


I have this "old" retail (not hobby quality) r/c car with a Chrysler 300 body on it.

Here's a video of a car like mine... this is NOT my video

1/6 rc chrysler 300 SRT (4 min 29 sec)

I bought this Brushed 30A controller from hobbyking and removed the "retail" receiver, servo and ESC stuff.

Finally, my question is... "Is there a way to configure forward and reverse with my ER9X Transmitter and the ESC listed above.

Any help is appreciated.

Thanks a bunch!

P.S. I've already installed the parts and the car works very well in forward motion, so if I never have reverse, it won't be a very big deal.
Sign up now
to remove ads between posts
Apr 07, 2012, 12:12 AM
Registered Basher
kistner's Avatar
That esc does not seem to have a reverse function. I think its an airplane esc.
Apr 07, 2012, 07:38 AM
Registered User
fly_right's Avatar
Thank you. I just completely forgot that I could use an xl-5 esc.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion BEC & aux power can it safely be done? Show 871 Power Systems 5 Mar 29, 2012 04:11 PM
Discussion This can be done with RC Belive me Kr1st1an Aerial Photography 5 Mar 09, 2012 10:54 AM
Discussion Can LDS be done on a DLG or is top drive as close as we can get? Fly2High Hand Launch 11 Feb 03, 2012 03:42 PM
Discussion Parkzone RX/ESC to control brushless esc. Can it be done? basicmods Radios 2 Jan 26, 2008 02:15 PM
Newbi question. 2 outrunners on ONE esc? Can it be done? randall1959 Electric Plane Talk 9 Oct 16, 2005 05:05 PM