New Products Flash Sale
Thread Tools
Old Nov 29, 2012, 10:25 AM
flohio117 is offline
Find More Posts by flohio117
DroneWorksUSA.net
flohio117's Avatar
I'm thinking about ordering some NTM prop drive 35-30 1100 kv motors to try on my HT-Fpv frame on 4s 10 inch graupner props. It should be ridiculous!!!!!!
Sign up now
to remove ads between posts
Old Nov 29, 2012, 12:52 PM
p0st4L is offline
Find More Posts by p0st4L
BUILD.FLY.CRASH.REPEAT.
p0st4L's Avatar
What FPV setups do you guys have on these? I have a BEVRC 1.3ghz setup w/ a LPF and i still get some nasty feedback. I have the video tx on it's own battery to cut down on jitter from the ESCs, but... I still don't get good range. I'm about to go back to my 5.8 setup...

Anyone?
RCG Plus Member
Old Nov 29, 2012, 01:18 PM
SDSURFnGLIDE is offline
Find More Posts by SDSURFnGLIDE
Multi rotors=No Paycheck left
SDSURFnGLIDE's Avatar
Quote:
Originally Posted by p0st4L View Post
What FPV setups do you guys have on these? I have a BEVRC 1.3ghz setup w/ a LPF and i still get some nasty feedback. I have the video tx on it's own battery to cut down on jitter from the ESCs, but... I still don't get good range. I'm about to go back to my 5.8 setup...

Anyone?
i run the RMRC 5800 uno with a cloverleaf on the Vtx and a cross hair on the Vrx...i havent been able to take it to its limits yet but from what ive been told is that it can go a good 2 miles at least ...

I also have a 5 turn helical and skewplanar in my arsenal...I have great reception and love it
Old Nov 29, 2012, 06:53 PM
flohio117 is offline
Find More Posts by flohio117
DroneWorksUSA.net
flohio117's Avatar
I have a 1.3ghz setup with a 400mw vid tx. I have a cloverleaf and skew planar and my video is super solid and crystal clear. I also have a immersion antenna tracker with a immersion duo 5800 diversity rx with a skew planar and 7dbi patch and I cannot get much more than 1 kilometer without having serious loss of video. Anything more than a kilometer and my video is going out and back in and sometimes completely out and I have to put my quad into return to home until I get video back. I say get RMRC 1.3 stuff with a skew planar and cloverleaf and never look back lol.
Old Nov 29, 2012, 08:06 PM
Buzz_Man is online now
Find More Posts by Buzz_Man
Fly safe, fly often!
Buzz_Man's Avatar
Only been gone two days but I already miss my HT-FPV . . . I'll get another one for sure.
Old Nov 30, 2012, 10:16 AM
flohio117 is offline
Find More Posts by flohio117
DroneWorksUSA.net
flohio117's Avatar
Quote:
Originally Posted by Buzz_Man View Post
Only been gone two days but I already miss my HT-FPV . . . I'll get another one for sure.
What happend to yours? I love mine it's awesome.
Old Nov 30, 2012, 11:09 AM
Buzz_Man is online now
Find More Posts by Buzz_Man
Fly safe, fly often!
Buzz_Man's Avatar
Quote:
Originally Posted by flohio117 View Post
What happend to yours? I love mine it's awesome.
I sold it - long story - but I'll get another one.

Or two.

Awesome frames.
Old Nov 30, 2012, 05:01 PM
p0st4L is offline
Find More Posts by p0st4L
BUILD.FLY.CRASH.REPEAT.
p0st4L's Avatar
Hmm. I have the CL setup on mine as well, and still getting crap. How are you guys mounting the antenna on the frame? I have it mid center, and up high.

https://www.dropbox.com/s/mwq0gd51vs...%2043%20PM.jpg
RCG Plus Member
Old Nov 30, 2012, 05:08 PM
Cervanchez is offline
Find More Posts by Cervanchez
Habitual Line Stepper
Cervanchez's Avatar
from that pic, that looks like a skew planar wheel (4 lobes), not a CL (3 lobes). I've read that the CL is preferred on the tx, and the spw on the ground. It has something to do with the gain and CL being slightly more omni directional. I don't know if thats your problem, but just an observation. Do you have the same antenna on your Rx?
Old Nov 30, 2012, 05:29 PM
p0st4L is offline
Find More Posts by p0st4L
BUILD.FLY.CRASH.REPEAT.
p0st4L's Avatar
I had gotten this kit:

http://www.readymaderc.com/store/ind...oducts_id=1112

so ya, I had the 4 lobes on each end. I have a 3 lobe from a cheaper antenna kit. I'll try throwing that on the Rx and see how it goes (once the sun comes out).
RCG Plus Member
Old Nov 30, 2012, 06:12 PM
flohio117 is offline
Find More Posts by flohio117
DroneWorksUSA.net
flohio117's Avatar
Oh I have the skew planar 4 lobe on the ground and a cloverleaf 3 lobe on the vid tx. If your using 5.8 video is crappy at distances. But if using 1280mhz it should be rock solid.
Old Dec 01, 2012, 01:44 PM
Cervanchez is offline
Find More Posts by Cervanchez
Habitual Line Stepper
Cervanchez's Avatar
Quote:
Originally Posted by p0st4L View Post
I had gotten this kit:

http://www.readymaderc.com/store/ind...oducts_id=1112

so ya, I had the 4 lobes on each end. I have a 3 lobe from a cheaper antenna kit. I'll try throwing that on the Rx and see how it goes (once the sun comes out).
Actually the 3 lobe goes on the tx (on the quad). Let us know what your results are. I was interested in what difference it makes. About your feedback, is it constant? Does it get better with altitude? Is it lines across the video? Need more info
Last edited by Cervanchez; Dec 01, 2012 at 01:51 PM.
Old Dec 01, 2012, 03:41 PM
shdwkeeper is offline
Find More Posts by shdwkeeper
Registered User
For those of you using a Naza on the HT-FPV frame, did you solder the wires for power directly to the distribution board or did you make a separate connector (ec3 etc...) and solder that so its easy to remove the Naza if you had to without un-soldering?

I'm thinking separate for ease.

Just curious.
Old Dec 01, 2012, 04:03 PM
SDSURFnGLIDE is offline
Find More Posts by SDSURFnGLIDE
Multi rotors=No Paycheck left
SDSURFnGLIDE's Avatar
I soldered a jst connector to my VU for the Naza....that way i can power it separately... also it is necessary to power it separately depending on your escs
Old Dec 01, 2012, 04:08 PM
nike25 is offline
Find More Posts by nike25
Registered User
Quote:
Originally Posted by SDSURFnGLIDE View Post
I soldered a jst connector to my VU for the Naza....that way i can power it separately... also it is necessary to power it separately depending on your escs
Same here.
+1


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show Us Your Ground Station !!!! FPV Ground Station Design and Idea's found here :) JettPilot FPV Equipment 4626 Dec 02, 2016 10:36 PM
Discussion Show us your FPV Multicopter Derek_S FPV Talk 194 Feb 08, 2013 01:07 PM
Discussion FPV Successful? Show us setup and parts list Royalson FPV Talk 0 Mar 10, 2012 09:25 AM
Discussion Show us your FPV / RVP ground Base set up in action Trackercal FPV Talk 94 Nov 05, 2010 11:21 AM
Discussion Show Us Your FPV Helo Set Up Trackercal FPV Talk 2 May 12, 2009 12:05 AM