Show Us Your Hoverthings FPV Frame - Page 100 - RC Groups
Thread Tools
Nov 12, 2012, 08:53 PM
DroneWorksUSA.net
flohio117's Avatar
Hey guys here's an awesome video of my ht FPV frame
Hoverthings FPV Quadcopter Election Day flight! (watch in 720P) (4 min 32 sec)
Sign up now
to remove ads between posts
Nov 12, 2012, 09:01 PM
KK4LIK
theSouthGA's Avatar
Nice video man! Good control too. I dont have the nuts to fly that high or around houses like that yet.
Nov 12, 2012, 09:04 PM
DroneWorksUSA.net
flohio117's Avatar
Quote:
Originally Posted by theSouthGA
Nice video man! Good control too. I dont have the nuts to fly that high or around houses like that yet.
I've been flying for a while lol. My last flight I flew 1.8km away it's a new record on my quad. Ill be making that video soon.
Nov 12, 2012, 09:21 PM
Custom quad builder
tech69x's Avatar
What FC are you using if its a Naza can you post your settings nice vid btw
Nov 12, 2012, 09:51 PM
video flohio117

Nov 12, 2012, 10:45 PM
DroneWorksUSA.net
flohio117's Avatar
Quote:
Originally Posted by tech69x
What FC are you using if its a Naza can you post your settings nice vid btw
Yes it's the naza. Ill have to check out my settings but there nothing special lol.

@Scrape I can only edit so many vids so fast lmao ill try n get it up by Thursday
Nov 12, 2012, 11:14 PM
Custom quad builder
tech69x's Avatar
I have the cc3d on mine and I can't seen to get rid of a tail wag problem so I'm going to try my Naza on it
Nov 12, 2012, 11:19 PM
I'm New
unfaix's Avatar
@everyone above regarding tail wag.

Seems to do that with with every flight controller i've used, must be the frame configurations.

used: naze32, hoverfly, copter control
Nov 12, 2012, 11:25 PM
Custom quad builder
tech69x's Avatar
Thanks for the info ill just have to do some more fine tuning
Nov 13, 2012, 09:15 AM
Registered User
Boris B's Avatar
Quote:
Originally Posted by theSouthGA
are those 8" Graups on 3s too?
No those are 9x5 graupners on 3S. There is really plenty of room......much more than you think. I actually also thought it would never fit.


Nice flight flohio
Nov 13, 2012, 12:49 PM
DroneWorksUSA.net
flohio117's Avatar
Quote:
Originally Posted by garbungel
Nice flight flohio
Thanks I'm not sure what you guys mean by the tail wag. Mine will wobbl every direction if I flip it into atti mode while moving fast. I'm used to it so it's predictable. I'm flying with 10inch props on 3s 3300 and 4400mah packs flys good. It also powers all the Fpv equipment that's onboard aswell. I have a iconic x quad that I'm going to make a super fast light Fpv quad. I'll be putting my cc3d on it and I'll be running 10inch graupners on 850kv motors on 4s. Should be fun
Nov 14, 2012, 12:36 AM
LOAD "FLIP-FPV",8,1
vic20owner's Avatar
Quote:
Originally Posted by flohio117
Hey guys here's an awesome video of my ht FPV frame
http://youtu.be/CHdzEJPebQU
Nice work! You made it onto the website

Hope that is ok
Nov 14, 2012, 12:38 AM
LOAD "FLIP-FPV",8,1
vic20owner's Avatar
Quote:
Originally Posted by unfaix
@everyone above regarding tail wag.

Seems to do that with with every flight controller i've used, must be the frame configurations.

used: naze32, hoverfly, copter control
Increase yaw gain to reduce waggle.
Nov 14, 2012, 12:44 AM
Custom quad builder
tech69x's Avatar
I did just that today flying like a dream now
Nov 14, 2012, 01:04 AM
I'm New
unfaix's Avatar
Quote:
Originally Posted by vic20owner
Increase yaw gain to reduce waggle.
that totally escapes me.

thanks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show Us Your Ground Station !!!! FPV Ground Station Design and Idea's found here :) JettPilot FPV Equipment 4879 Nov 03, 2017 11:44 PM
Discussion Show us your FPV Multicopter Derek_S FPV Talk 194 Feb 08, 2013 01:07 PM
Discussion FPV Successful? Show us setup and parts list Royalson FPV Talk 0 Mar 10, 2012 09:25 AM
Discussion Show us your FPV / RVP ground Base set up in action Trackercal FPV Talk 94 Nov 05, 2010 11:21 AM
Discussion Show Us Your FPV Helo Set Up Trackercal FPV Talk 2 May 12, 2009 12:05 AM