Will this Work??( My first attempt at a quad) - RC Groups
Thread Tools
Apr 02, 2012, 10:28 PM
Scratch builder
Bixler13's Avatar

Will this Work??( My first attempt at a quad)

Well i have decided to build a quad copter and have a few questions. And by the way, i am on a very tight budget. I have many sizes of 3 cell lipos.(500mah-2200mah)
Motors: FC 28-22 Brushless Outrunner 1200kv
-will these motors be a good choice for a quad? I think i have heard of other people using similar motors
-any other super cheap motors that are a better choice(5-12 dollar range)
-what is the recommended size I should build the frame?(i will be using hollow 3/8 inch square carbon tubing)
-what props?(I am thinking around 10x5)

Sign up now
to remove ads between posts
Apr 02, 2012, 11:03 PM
Registered User
go with 2208 or 2212 size motor. 1100kv and 8 x 4.5 props

1800-2200mah 3c perfect with this set up.
Apr 02, 2012, 11:13 PM
Scratch builder
Bixler13's Avatar
1800-2200mah 3c perfect with the motor i had originally selected? or the 2208 or 2212 size motors?

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion My prop guard idea - will this work? TheNiceGuy Multirotor Drone Talk 18 Jun 02, 2012 09:56 AM
Whoops! My first attempt at a flip. (Warthox, don't look) Rifraf Multirotor Drone Talk 29 Apr 20, 2012 11:13 PM
Discussion Will this brushless setup work in my Big lama stafphoto Coaxial Helicopters 5 Mar 29, 2012 03:12 PM
Discussion Attempting my first FPV quad[QUESTION] abriosi Multirotor Drone Talk 2 Feb 10, 2012 05:53 PM