Thread Tools
Sep 26, 2012, 09:27 PM
Building with TLAR precision
Zenmaniac's Avatar
Quote:
Originally Posted by Sean Oelofse
Hey J!
Give me enough time before Hermanus this time OK!
Time to break out the micro-surgery instruments, Sean!
Sign up now
to remove ads between posts
Sep 27, 2012, 01:33 PM
.....till the wind drops.
Sean Oelofse's Avatar
I'm nervouse Shadowman!!
Last edited by Sean Oelofse; Sep 27, 2012 at 01:34 PM. Reason: Who must I bribe for a Permit?
Sep 27, 2012, 02:06 PM
Stirring the pot
johannlochner's Avatar
Quote:
Originally Posted by Sean Oelofse
I'm nervouse Shadowman!!
I'm just vacillating the stab!

Graham's not around to cut the cores.....
so,
I used some old Jart cores and sanded them to suit!
Now...
A full flying stab or hinged?
They both come with their own set of challenges!

I'll bag it over the weekend.
It should be downhill from there!

I'll bring it over after that!
J
Last edited by johannlochner; Sep 27, 2012 at 02:09 PM. Reason: The advantages of living in Africa.... We don't need permits for anything!
Sep 27, 2012, 02:10 PM
Building with TLAR precision
Zenmaniac's Avatar
Thought Sean was devising a 180 degree rotating stab? Can't have it hinged -- or is this an executive decision?

-= Dave
Sep 28, 2012, 09:24 AM
less sleep more planes
PlayinInTheParK's Avatar
Did a lot of thinking on the elevator and rudder for my new design .
This is what i am going to use on elevator .

Mad cam can be passed into the fuse with the push rod then you slide the square carbon axle through it then put you tails on .
The only thing i haven't worked out properly is how to make the bearing support,needs more thinking
I have made a madcam with circuit board and fishing trace ,amazing no slop design it can go 180.

Hope this helps ,Shane
Sep 28, 2012, 10:10 AM
Stirring the pot
johannlochner's Avatar
Quote:
Originally Posted by PlayinInTheParK

Hope this helps ,Shane
That's awesome!
Thanks Shane

I think the 1st one should just be a pretty conventional set-up.
I'll follow your lead on the next one as I would like to resolve the general flying characteristics first.
J
Sep 29, 2012, 06:35 PM
Stirring the pot
johannlochner's Avatar
I'd like to see what you come up with the stab bearing plate Shane.
Also the push rod/cam connection.....

The stab is in the vac bag.
A carbon cloth is a bit heavier than expected, so it's just glass.
I'll paint it later.
Generally things have got out of hand weight wise!
I expect the AUW at about 950g

I'll work on the next one.....
At least I know where it is!
Oct 05, 2012, 10:42 AM
just a rumour
Drusky's Avatar
950g? My Fox is 2.2kg. Will you be ready to maiden by Saturday? I am ready to maiden. Maiden with me Johann, maiden with me, c'mon man!
Oct 05, 2012, 02:06 PM
Stirring the pot
johannlochner's Avatar
Quote:
Originally Posted by Drusky
950g? My Fox is 2.2kg. Will you be ready to maiden by Saturday? I am ready to maiden. Maiden with me Johann, maiden with me, c'mon man!
IT COULD BE....

Without colour!
Only servos to go!

J
Who thinks he needs another wing.... and tail feathers!
Oct 05, 2012, 02:49 PM
Graham Kirkland
graham1234's Avatar
You want - I make !!!!

Another wing and tail feathers will be delivered tomorrow. This wing is much prettier than the last one. The core is glued, sanded and shaped, ready to bag.

See you tomorrow J

Graham
Oct 05, 2012, 03:01 PM
Stirring the pot
johannlochner's Avatar
Well done Graham!

The current wing set is basically a Le Fish configuration.....
No offence intended, but they are a bit brutish.
I'm sure we can give her more sensuous lines and still get some performance going!
Last edited by johannlochner; Oct 05, 2012 at 03:04 PM. Reason: A bit optimistic at 500g!
Oct 07, 2012, 01:02 PM
.....till the wind drops.
Sean Oelofse's Avatar

Congratulations!!


Well done J on an awesome maiden today!!
I think I will have to brush up on my thinking speed!!.........she flew faster than I could think!!
Last edited by Sean Oelofse; Oct 07, 2012 at 01:03 PM. Reason: My slow thinking landed me in trouble!
Oct 07, 2012, 01:17 PM
...missing the PE Slope Rebels
Flying Beagle's Avatar
so how does the fish swim ?
Oct 07, 2012, 01:31 PM
.....till the wind drops.
Sean Oelofse's Avatar
.....it swims like it flies!!

Life - Flying Fish (1 min 5 sec)
!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion First Fun Fly of the year at Hartford Pa. 3/16, 3/17, 3/18. 2012 Curt S Electric Flight Events 0 Mar 14, 2012 11:08 AM
Contest 2012 New Years Day Postal Contest Mr B.... Sailplane Events 115 Jan 08, 2012 11:38 AM
Contest 2012 New Years Postal Contest Mr B.... Thermal 1 Dec 27, 2011 09:03 PM
Discussion 2012 the year of the Hypothecation event bubble bursting making sub prime look small treehog Life, The Universe, and Politics 0 Dec 17, 2011 06:59 PM