Shop our Airplanes Products Drone Products Sales
Apr 11, 2012, 09:02 AM
Registered User
TruckBasher's Avatar
Ok, I guess will just figure out a way to balance out the CG. Maybe make a temp mount in front and put a gopro (while waiting for your camera mount). The ESC just arrive but had to work so might give it a try later on. Thanks
Sign up now
to remove ads between posts
Apr 11, 2012, 09:03 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by TruckBasher View Post
Ok, I guess will just figure out a way to balance out the CG. Maybe make a temp mount in front and put a gopro (while waiting for your camera mount). The ESC just arrive but had to work so might give it a try later on. Thanks
What kind of camera mount your looking at ?
Apr 11, 2012, 09:18 AM
Registered User
TruckBasher's Avatar
Just GoPro and maybe an FPV camera only
Apr 11, 2012, 09:22 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by TruckBasher View Post
Just GoPro and maybe an FPV camera only
Ok but a fixed camera mount ?
Plates... ?
Apr 11, 2012, 09:35 AM
Registered User
TruckBasher's Avatar
Im thinking fix only at this time...I just want to get it up in the air. will consider 1-2axis mounts later on. Do you have anything ready?
Apr 11, 2012, 09:50 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by TruckBasher View Post
Im thinking fix only at this time...I just want to get it up in the air. will consider 1-2axis mounts later on. Do you have anything ready?
Fixed plate is already availible.
For GoPro with rubber-band.
Apr 11, 2012, 09:53 AM
Registered User
TruckBasher's Avatar
why didnt I buy that grrrrrr..

maybe i'll contact you guys with some hardware for my spare.

Do you have the photo? I know you posted it somewhere but I thought it was still not ready.
Apr 11, 2012, 09:59 AM
Registered User
Hey Eric, Nice V tail chassis! I like it! Nice job!
Apr 11, 2012, 10:16 AM
Registered User
TruckBasher's Avatar
This is the only camera mount photo I remember seeing. I might have missed the actual photo of the mount

Apr 11, 2012, 10:24 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by TruckBasher View Post
This is the only camera mount photo I remember seeing. I might have missed the actual photo of the mount

[]http://farm8.staticflickr.com/7180/6874654148_eeb2310ca0_o.jpg[/IMG]
Yes it would look like that
Apr 11, 2012, 12:22 PM
Multirotor Builder!!!!!
Ok guys this is my last ask at this. I thought the wobbles were gone yesterday morning. but I was wrong. so this is what I have tried. I have tried different size of the same props, I have tried 2 different size props front and rear. like 9/8 10/9 etc. .the stock PID setting the V-tail just wobbles really bad and almost flips. So I have set the P from the number 4.0 down to 3.0 on all P's R, P, Y and in different incriments. I have done the same with the I and the D like I higher then D and D higher then I. And I have noticed that the only thing that now has made the wobbles go away is dropping the I and D to ZERO. now she doesn't wobble but then it doesnt feel right either. So I am asking if anyone can take the time to help me with this that is using multiwii. and Please Please post your settings that are working for you. and here is the kicker. My other frame I am using the KK board and no wobbles. So I am stumped. I really want to use the NAZE on this for the auto level and the hight hold/ compass. so let me know what info you got. and I want to say thanks in advance.TC3

Just incase anyone wanted to ask, Yes I had Auto level NOT selected in the GUI. so there were no accidents with an accidental flipped switch..

You guys can PM me as well.
Last edited by tc3wins; Apr 11, 2012 at 12:32 PM.
Apr 11, 2012, 12:31 PM
Multirotor Builder!!!!!
Oh here is another funny thing. For S and G's , I tried the hight hold with the stock setting for it, and even with the wobble, it held hight pretty well.
Apr 11, 2012, 12:44 PM
Registered User
Bledi's Avatar
Do you try the kk board on the 400 ?
For the moment I can't help you because I wait for it.
The only thing I had see on thé prototype is that you need more I on pitch than on roll.
Apr 11, 2012, 01:03 PM
Multirotor Builder!!!!!
The KK board is mounted on the 400 frame, also on these frame should I be using same size props all the way around or smaller in the rear.
Apr 11, 2012, 01:05 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by tc3wins View Post
The KK board is mounted on the 400 frame
I know that Multiwii board are much more affected with Vibrations.

Some people just ditch a Multiwii for a KK on a copter and it fly real good.

Did you balance your prop ?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Bledi-DiaLFonZo Copter VTail HUNTER 400 CANOPY + Addons Innerbreed Multirotor Drone Talk 42 Sep 20, 2013 09:41 PM